Smith & Noble Natural Woven Shades User manual

Natural Woven Shades
STEP BY STEP INSTALLATION INSTRUCTIONS
Motivia™
Motorization
1234 5

2
800.248.8888
1smithandnoble.com
A Smooth Set-Up
We want you to love your new window coverings and that
includes having a smooth installation experience. If you
encounter any difficulties or questions, please reach out
to us for help. It’s why we’re here. Call us at 800.248.8888
or visit www.smithandnoble.com/knowhow for more info
on installation.
We recommend you hold on to all packaging until your
window coverings are fully installed. Should something go
wrong (we strongly doubt it), we want any potential returns to
be a painless as possible.
Customer Service Hours
Monday — Friday: 6am — 7pm PT
Saturday — Sunday: 7am — 4pm PT
smithandnoble.com
Everything
You Need
Table of Contents
Step 1 - Getting Started ..................................3
Overview - Motorization ....................................4
Step 2 - Mounting the Brackets ........................ 5 - 6
Step 3 - Attaching the Power Source .......................7
Attaching the Battery Pack ........................7
Step 4 - Operating the Remote Control ....................8
Troubleshooting.............................................9
Safety.....................................................10
Care & Cleaning ...........................................10
Warranty ..........................................Back Cover

34
smithandnoble.com 800.248.8888
OverviewStep 1
First, make sure you have all the parts and tools required to install your shades.
ALL THE HARDWARE YOU’LL NEED:
Pencil, screwdriver, ¼” nut driver, level, and a drill with a 7⁄64” drill bit.
Then nd wooden studs where you’ll want to attach the brackets; if you need to mount your
shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For
metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile
surfaces, use a masonry drill and appropriate plugs, anchors, or screws.
It’s important when selecting a fastener to make sure it’s designed to support the weight of the
shade. Follow the fastener manufacturer’s instruction from there on out.
Getting Started Motorization
1234 5
2½"
2½"
Rail
For shade Standard Rail
widths of:Inside or Outside Mount Inside MountOutside Mount
Up to 40" 2 2 2
>40" to 72" 3 3 4**
>72" to 84" 4 4 5**
>84" to 120" 5* 5 6**
**76pudna021>
Large Rail
Use this Number of Brackets:
EXTENSION BRACKET
(OPTIONAL)
SCREWS
PENCIL & SCREWDRIVER
(NOT INCLUDED)
POWER DRILL & LEVEL
(NOT INCLUDED)
INSIDE MOUNTING
BRACKETS
OUTSIDE MOUNTING
BRACKETS
MOUNTING
BRACKETS
REMOTE
CONTROL

56
smithandnoble.com 800.248.8888
Step 2 — Mounting the BracketsStep 2 — Mounting the Brackets
Inside Mount
For as inside mount, hold the shade
inside the window frame. Center the
shade so the space between the end of
the headrail and edges of the window
frame are equal.
The brackets are mounted with two
screws at against the top sill surface.
To fully recess the shade requires a at
surface with a minimum depth of 2". A
minimum depth of ¾" is required.
With the brackets installed and level
with one another, remove the wing
nuts from the bolts and place the
shade onto the brackets.With the bolts
coming through the mounting slots on
each of the headrail, reinstall the wing
nuts onto the bolts and hand tighten.
NOTE: Inside mount Waterfall Shades
will have a short ap in the back of the
shade to hide the mechanisms.
Outside Mount
Center the shade over the window
opening at the desired height. Mark
the position of the ends of the headrail
on the wall with a pencil.
Measure ½" in from the marks on each
side and mark with a pencil. Place the
outside edge of each bracket on these
marks and attach with the screws
provided using 2 screws per bracket.
With the brackets installed and level
with one another, remove the wing
nuts from the bolts and place the
shade onto the brackets. With the
bolts coming through the mounting
slots on each end of the headrail,
reinstall the wing nuts onto the bolts
and hand tighten.
BRACKET QTY SHADE WIDTH
2up to 36"
3361⁄8—72"
4721⁄8—96"
5961⁄8—120"

78
smithandnoble.com 800.248.8888
Step 3 — Attaching the Power Source & Batter Pack
Step 4 — Operating the Remote Control
Attaching the Transformer
(optional)
Plug the transformer wire into the motor
wire. Secure the wire behind the shade
and along the window casing as required.
Plug the transformer into an electrical
outlet.
If the wire is not long enough to reach,
optional 48" extension wires are available.
Attaching the Power Source
When attaching the Power Source to
the shade, first plug the battery pack
wire into the motor wire.
Battery comes mounted to headrail
in front of take up tube.
Battery Pack
Battery Wire
Motor Wire
Attach and twist
clockwise until tight
(do not overtighten)
To Solar Panel
To Motor
Remote Control
Select the desired channel with the
CHANNEL key. The channel indicator
light will illuminate the channel that
is on. If all 5 lights are lit, the remote
will control all 5 channels at once.
Tapping the UP or DOWN keys for
less than 2 seconds will move the
shade in short steps. Holding the
UP or DOWN keys down for more
than 2 seconds before releasing,
will operate the shade in the faster
standard speed.
Press the UP or DOWN keys to raise
or lower the shade.
Press the STOP key to stop the shade
anywhere along the window.
Refer to the Motorization Guide
online for additional details.
www.smithandnoble.com/motivia
Channel
Display
Up
Stop
Down
Channel +
Channel —
1234 5
Mounting Battery Pack on
Headrail
If needed, insert included batteries into
the battery pack following the diagram
on the outside of the battery pack.
Attach the pack clips to the headrail
as pictured.
Then press the battery pack into clips.
Mounting Battery Pack on Wall
Attach the pack clips with the screws
provided. If necessary, remove shade to
mount the clips in the desired location.
Then press the battery pack into clips.
Wall mount -
attach the wand
clips with the
screws provided. If
necessary, remove
shade to mount the
clips in the desired
location.
UltraSleek Plus Deluxe
Transformer
Headrail
Battery
Pack
Battery
Pack
Battery
Wire
Battery
Clips
Wire to
Motor
Transformer
Wire
Attach and twist
clockwise until tight
(do not overtighten)

910
smithandnoble.com 800.248.8888
Troubleshooting Care & Cleaning /Safety
If these suggestions don’t work, then please give us a call or visit our website.
PROBLEM SOLUTION
The shade does not move
1. Check that the power source and motor
are connected properly.
2. Conrm the batteries in battery pack are fresh.
The shade only goes in
one direction (up or down)
The limit setting was unsuccessful and needs
to be reset. Refer to Motorization Guide.
The indicator light on the remote does
not light up or the remote-controlling
range becomes shorter.
Replace the battery in the remote
(CR2430 Lithium)
The shade stops working
or works intermittently
Replace the batteries in the pack with 8
fresh AA alkaline batteries.
Shade goes up when the down button
is pushed, and goes down when the up
button is pushed.
Press the "Limit" button on the
underside of the remote and the "Stop"
button at the same time. Hold until the
shade jogs once. The shade should now
move in the correct direction.
Care & Cleaning
Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all
that is required to keep your shades looking fresh and neat.
Safety First. Style Second To None™.
Great style should never come at the cost of safety. Every Smith & Noble window treatment
conforms strictly to today’s safety standards, including permanent tie-down devices and built-in
cord stops. To protect young children and pets, there’s no better way to eliminate risk than to
use one of our Motivia motorized products.
Child Safety

© 2016 Smith & Noble Home, Inc. All Rights Reserved SN0216
Warranty Service
The enjoyment of your window covering should be everlasting, which
is why our products come with a limited lifetime warranty. The warranty
applies to the original owner, requires a proof of purchase (hang on to
your receipt!) and covers defects in material or craftsmanship. Hardware
must have been properly installed. We reserve the right to determine if
your hardware warrants a repair or a replacement. Visit smithandnoble.
com/guarantee to see full details. In need of warranty service? Call us at
800.248.8888 and we’ll arrange for a repair or replacement ASAP.