SOLTEK 85DRV5 User manual

4
85DRV5 / 85DRV5-L
Contents
Item Checkup..................................................................................7
Chapter 1 Specification ............................................. 8
1-1 85DRV5 / 85DRV5-L Components and Options .................9
1-2 Mainboard Specifications .................................................... 1
1-2.1 CPU Socket ................................................................................... 1
1-2.2 System Chipsets ........................................................................... 1
1-2.3 Memory ......................................................................................... 1
1-2.4 AMI BIOS ..................................................................................... 1
1-2.5 Accelerated Graphics Port (AGP) Interface........................... 1
1-2.6 Advanced System Power Management:................................... 11
1-2.7 Multi-I/O Functions :.................................................................. 11
1-2.8 Expansion Slots ............................................................................ 11
1-2.9 AC’97 Audio Codec on board .................................................... 12
1-2.1 LAN on board (85DRV5-L only)............................................. 12
1-2.11 Hardware Monitor on board ................................................... 12
1-2.12 6-channel Sound Output Support (optional) ........................ 12
1-2.13 Form Factor................................................................................ 12
1-3 Mainboard Specification Table ........................................... 13
1-4 Chipset System Block Diagram........................................... 14
Chapter 2 Hardware Setup..................................... 15
2-1 Pentium 4 CPU and Installation ......................................... 16
2-1.1 To Identify a Pentium 4 CPU..................................................... 16
2-1.2 CPU Installation with Socket 478B .......................................... 17
2-2 Pentium 4 CPU Fan Installation ......................................... 18
2-3 Memory Installation ............................................................. 19
2-3.1 To Install DDR SDRAM Module .............................................. 19

5
Contents
2-3.2 To Remove a DIMM .................................................................... 2
2-4 AGP 4X/2X Card Installation.............................................. 21
2-5 IDE Connector Installation ................................................. 22
2-6 Flopy Drive Connector ( FDC ) Installation ..................... 23
2-7 ATX V 2. 3 Power Supply Installation .............................. 24
2-8 Jumper and Switch Settings ................................................ 25
2-8.1 JBAT1: Clear CMOS .................................................................. 26
2-8.2 Jp1 and SW1: CPU Clock/Overclock Select........................... 27
2-8.3 Jp2: Flash ROM Write Protection ........................................... 28
2-9 Other Connectors Configuration........................................ 29
2-9.1 On-board FAN Connectors ........................................................ 29
2-9.2 Connector WOL1: Wake On LAN............................................ 3
2-9.3 CD-ROM Audio Connector (CD1) ........................................... 3
2-9.4 PS/2 Mouse And PS/2 Keyboard ............................................... 31
2-9.5 Chassis Panel Connectors ......................................................... 31
2-9.6 RJ45: LAN Connector (85DRV5-L only) ................................ 32
2-9.7 Thermal Sensor Connectors RT1 and RT2 ............................. 33
2-9.8 Complex Pin-header.................................................................... 34
2-9.9 USB Ports and USB Pi-headers................................................. 36
2-9.1 Audio 1: 6-channel Sound Output Connector (optional) ...37
2-9.11 SCR1: Smart Card Reader Connector .................................. 37
Chapter 3 Software Setup ....................................... 38
3-1 Open Up Suport CD .............................................................. 39
3-2 Proceed to VIA 4-IN-1 Drivers Installation ...................... 4
3-3 AC’97 Audio Driver Installation......................................... 42
3-3.1 Driver Installation for 2-channel/6-channel ........................... 42
3-3.2 6-channel Verification ................................................................. 43
3-4 Install USB 2. Driver for Win98 / Me / 2 / XP.......... 46
3-5 Install Hardware Monitor Utility ....................................... 48
3-5.1 Installation ................................................................................... 48

6
85DRV5 / 85DRV5-L
3-5.2 Verification .................................................................................. 49
3-6 Install VIA LAN Drivers (for 85DRV5-L only) ................ 5
3-6-1. VIA6183 LAN driver on Windows 9X.................................... 5
3-6-2. VIA6183 LAN driver on Windows NT4. .............................. 52
3-6-3. VIA6183 LAN driver on Win ME / 2 / XP ....................... 53
Chapter 4 AMI BIOS Setup.................................... 54
4-1 About BIOS Setup ................................................................. 55
4-2 To Run BIOS Setup ............................................................... 55
4-3 About CMOS .......................................................................... 55
4-4 The POST ( Power On Self Test ) ....................................... 55
4-5 To Update BIOS ..................................................................... 56
4-6 BIOS SETUP --- CMOS Setup Utility................................ 58
4-6.1 CMOS Setup Utility .................................................................... 58
4-6.2 Standard CMOS Setup ............................................................... 59
4-6.3 Advanced BIOS Features ........................................................... 62
4-6.4 Advanced Chipset Features ....................................................... 65
4-6.5 Power Management Features .................................................... 68
4-6.6 PNP / PCI Configurations .......................................................... 71
4-6.7 Integrated Peripherals................................................................ 73
4-6.8 Hardware Monitor Status .......................................................... 76
4-6.9 Frequency/Voltage Control ....................................................... 78
4-6.1 Set Supervisor Password .......................................................... 8
4-6.11 Load Optimized Defaults ........................................................ 82
4-6.12 Save & Exit Setup...................................................................... 82
4-6.13 Exit Without Saving .................................................................. 82
APPENDICES.......................................................... 84
Appendix-1 Identify Mainboard Model Number ................... 85
Appendix-2 Technical Terms ...................................................... 86

7
Contents
Item Checkup
• Mainboard
• Support CD
• Bundled Bonus Pack CD
• Bundled Bonus Pack Manual
• User Manual (Mainboard)
• Multi-lingual Quick Installation Guide
• Thermal Sensor Cable (Optional)
• ATA66/100 IDE Cable
• FDD Cable

8
85DRV5 / 85DRV5-L
Topics included in this chapter are:
1-1 Mainboard Components Locations
1-2 Mainboard Specifications
1-3 Mainboard Specification Table
1-4 Chipset Diagram
Introduction
Chapter 1 Specification
This series of mainboards features an integration of the powerful
processor Intel Pentium 4 and the single-chip North Bridge VIA Apollo
P4X266E plus South Bridge VT8235, by which the whole system per-
formance can be upgraded to 533 MHz system bus.
The Intel P4 processor is a rapid execution engine providing 4X100/
4X133MHz quadpumped system bus to allow 3.2GB data transfer rates
possible, while VIA Apollo P4X266E plus VT8235 supports Intel P4 pro-
cessor to implement the 4X133 Front Side Bus, AGP 4X external bus,
the LPC Super I/O, the DDR266 SDRAM and UATA 133/100/66 data
transfer rate. This chapter is to introduce to users every advanced
function of this high performance integration.

9
Chapter 1 Specification
DIMM 3
DIMM 1 DIMM 2
PCI 1
PCI 2
PCI 3
PCI 4
PCI 5
PCI 6
FLASH BIOS
Li
Battery
Peripheral Power
Conne tor
+12 Power Conne tor
41
Main Power
Conne tor
SW1
ON DIP
1 2 3 4
VIA
P4x266E
VIA
VT8235
1
mPGA478B
IDE2 IDE1
FDC1
1 3
FAN2
FAN1
1
FAN3
1
1
FAN4
IT8705F
LPC I/O
LPT1
COM1
MIC
GAME/MIDI PORT
LINE OUT
LINE IN
PS/2 K/B¤
(underside)
PS/2 Mouse
(on top)
USB1 (underside)
USB0 (middle)
RJ 45
(on top)
AC'97
Code
JUSB2
1
10
JUSB1
1
10
SCR1
1
14
AUDIO1
1
14
AGP 4X/2X
WOL1
1
RT1
RT2
1
JP1
1
JBAT1
1
JP2
SAPK RST PLED SLED
HDD/LED IR PWR SMI
++
--
+-
1
30
VIA VT6103
PHY (LAN Controller)
CD1
1
3
2
COM2
Audio Code
DDR 266/200
1-1 85DR 5 / 85DR 5-L Components and Options
RJ45
PHY LAN Controller
for 85DR 5-L only
}
Optional 6-channel Audio-Out Connector

1
85DRV5 / 85DRV5-L
1-2.1 CPU Socket
CPU Socket 478B on board, supporting Intel® Pentium 4 processors in
478-pin package for :
-- 533/400MHz System Bus;
-- Hyper-pipelined technology;
-- Advanced dynamic execution;
-- Advanced transfer cache;
1-2.2 System Chipsets
• North Bridge VIA P4X266E for managing and supporting 4X133/
4X100MHz system Bus, DDR 266/200 SDRAM memory interface,
Hub interface and AGP4X/2X interface.
• South Bridge VIA VT8235 working with North Bridge supporting the
4X V-Link, LPC Super I/O, upstream Hub interface, PCI interface,
IDE interface, LAN interface, USB V2.0 interface as well as the AC’97
6-channel Audio interface
1-2.3 Memory
3 DDR DIMM 184-pin slots on board for DDR 266/200 SDRAMs :
• Supporting unregistered, non-ECC DDR 266/200 SDRAM up to 3
GBs; DIMM voltage adjustable in BIOS Setup
• Supporting installation of mixed volumes yet same type of DDR
SDRAM modules
1-2.4 AMI BIOS
• Supporting Plug & Play V1.0
• Flash Memory for easy upgrade
• Supporting BIOS Writing Protection and Year 2000 compliant
• Supporting BIOS Setup (See Chapter 4 BIOS Setup)
1-2 Mainboard Specifications
1-2.5 Accelerated Graphics Port (AGP) Interface
AGP Controller embedded on board, supporting:
• 1.5V (4X) and 3.3V (2X) power modes in 1 AGP Slot supported
• 4x AD and SBA signaling, AGP pipelined split-transaction longburst
transfers up to 1GB/sec.
• AGP Voltage adjustable in BIOS Setup

11
Chapter 1 Specification
1-2.7 Multi-I/O Functions :
• PCI EIDE Controller, supporting:
-- 2x Ultra ATA133/100 / 66 IDE connectors supporting up to 4 IDE
devices
• Dedicated IR Functions:
-- 1x5 Pin-header dedicated to IR function either through the two
complete serial ports or the third dedicated port Infrared-IrDA (HPSIR)
and ASK (Amplitude Shift Keyed) IR
• Multi-mode parallel data transfer:
-- Standard mode, high speed mode ECP and enhanced mode EPP
• Floppy Disk connector:
-- One FDD connector supporting 2 floppy drives with drive swap support
• Universal Serial Bus Transfer Mode:
-- USB V2.0 compliant, 480 Mb/s USB Bus, supporting Win98 and up oper-
ating system; USB drivers provided in Support CD for user’s installation
-- 2 built-in USB connectors and 2 USB pin-headers which require 2 op-
tional USB cables to provide 4 more optional USB ports
• PS/2 Keyboard and PS/2 Mouse
• UARTs (Universal Asynchronous Receiver / Transmitter):
-- Two complete serial ports (COM1 & COM2) on board
1-2.8 Expansion Slots
• 6 PCI bus Master slots
• 1 AGP 4X/2X slot
• 3 DDR DIMM slots
1-2.6 Advanced System Power Management:
• ACPI 1.0 compliant (Advanced Configuration and Power Interface)
• APM V1.2 compliant (Legacy Power Management)
• ACPI POS (Power On Suspend)
• PS/2 Keyboard & Mouse Power On/Wake Up
• Supporting Ring Power Up Control for Wake-on-LAN (via Connector
WOL1 to add-on PCI LAN card)
• Real Time Clock (RTC) with date alarm, month alarm, and century
field

12
85DRV5 / 85DRV5-L
1-2.9 AC’97 Audio Codec on board
AC’97 Audio Codec 2.2 compliant on board
1-2.10 LAN on board (85DR 5-L only)
Fast Ethernet Controller integrated in VT8235 and PHY VIA VT6103:
• Supporting 10/100Mb Fast Ethernet Base-T LAN
• LAN Driver enclosed in Support CD for user’s installation.
• Supporting up to 6 channels of PCM audio output
• 6 channel audio consists of Front Left, Front Right, Back Left, Back
Right, Center and Woofer for complete surrround sound effect
• AC’97 Audio Codec Driver enclosed in Support CD for user’s
installation.
1-2.11 Hardware Monitor on board
• Hardware Monitor integrated in Super I/O IT8705F, providing moni-
toring and alarm for flexible desktop management of hardware voltage,
temperatures and fan speeds.
• Utility Software SmartGuardian for displaying Monitoring status is
enclosed in Support CD for user’s installation.
1-2.13 Form Factor
• ATX form factor, ATX power supply, version 2.03 compliant, supported
by one Main Power Connector, one +12V Power Connector and one
Peripheral Power Connector
• Mainboard size: 305mm x 220mm
1-2.12 6-channel Sound Output Support (optional)
• This series is designed with an optional 6-channel Audio-out connec-
tor Audio1”. If this option is chosen, an Audio-out card will be en-
closed in package to provide 3 additional audio-out ports for the 6-
channel sound.

13
Chapter 1 Specification
1-3 Mainboard Specification Table
CPU
North Bridge
South Bridge
BIOS
Memory
I/O Chip
AGP interface
Audio
IDE Interface
Networking
PCI Slots
I/O Connectors
VGA Display
Other Features
Optional Feature
LAN On Board
Socket 478B for Intel Pentium 4 CPUs
VIA P4X266E, supporting 533/400MHz FSB
VIA VT8235
AMI BIOS
Supporting DDR 266/200 SDRM, up to 3GB
in 3 DDR DIMM slots
IT8705F
AGP4X/2X mode
AC’97 Audio V2.2 compliant, 6-channel interface
2 UATA 66/100/133 IDE ports
VIA LAN Controller, 1xRJ45 (85DRV5-L only)
6 PCI Master slots on board
6xUSB ports (V2.0), 1xFDD port, 2xCOM ports,
1xLPT, 1xIrDA, 1xPS/2 K/B, 1xPS/2 Mouse,
VGA not integrated on board
BIOS Writing Protection;
Hardware Monitoring in IT8705F
Keyboard / Mouse Power On/Wake Up;
ATX 2.03 Power Supply;
ATX form factor
85DRV5 85DRV5-L
No Yes
SL-85DR 5 / 85DR 5-L Specifications and Features

14
85DRV5 / 85DRV5-L
1-4 Chipset System Block Diagram
Intel Pentium 4 + VIA P4X266E + VIA VT8235 Diagram
Pentium 4
DDR
DDR266/200
UATA66/100/133
P /2 keyboard
PCI Bus
P4X266E
North Bridge
CPU
AGP
lot
533/400 MHz F B
M Bus
LPC
4X (266MB/sec) V-Link
uper I/O
erial / IR
Parallel
Floppy Drive
6 PCI lots
478-pin package
Game Port
H/W Monitor
BIO
VT8235
South Bridge
Intel
AGP 4X/2X Bus
DRAMs
6x U Bs V2.0
AC'97 Audio (6-channel)
P /2 Mouse
VIA
VIA
Fast Ethernet Interface PHY(VT6103)
10/100 Base T LAN
(85DRV5-L only)
Memory Bus
MII

15
Chapter 2 Hardware Setup
Chapter 2 Hardware Setup
1. We recommend to install your CPU before any other components.
For detailed installation instructions of processor, you can also refer
to the pamphlet enclosed in your CPU package.
2. Installing a cooling fan with a good heatsink is a must for proper heat
dissipation for your CPU. Get ready an appropriate fan with heatsink
for proper installation. Improper fan and installation will damage your
CPU.
3. In case CPU Vcore, CPU clock or Frequency Ratio is adjustable on
board, please follow the instructions described in the User Manual
for proper setup. Incorrect setting will cause damage to your CPU.
The following topics are included in this chapter:
To Get Things Ready for Hardware Setup !
2-1 Pentium 4 CPU Installation
2-2 Pentium 4 CPU Fan Installation
2-3 Memory Installation
2-4 AGP4X/2X Card Installation
2-5 IDE Connector Installation
2-6 Floppy Drive Connector ( FDC ) Installation
2-7 ATX 2.03 Power Supply Installation
2-8 Jumper and Switch Settings
2-9 Other Connectors Configuration
2-10 IRQ Description

16
85DRV5 / 85DRV5-L
2-1 Pentium 4 CPU and Installation
2-1.1 To Identify a Pentium 4 CPU
Intel
pentium 4
2.4 GHz / 512 / 533 / 1.5
1) CPU Working Frequency
2) CPU L2 Cache
3) System Clock
4) CPU oltage core
On the heatsink side of a Pentium 4 CPU, there printed is a line of
figures to identify its specifications. The line consists of 4 parts:
1) CPU Working Frequency: This part depicts the working frequency
of the CPU. For example:
2.4 GHz depicts that this CPU is locked to 2.4 GHz working frequency
(multiplier 18 x 133MHz CPU clock);
2A GHz depicts that this CPU is an A version, locked to 2.0 GHz
working frequency (multiplier 20 x 100MHz CPU clock);
2) CPU L2 Cache: This part depicts the L2 Cache size. For Example:
512 stands for 512 MB L2 Cache; 256 stands for 256 MB L2 Cache;
3) System Clock: This part depicts the System Clock (Front Side Bus)
to be provided by the CPU. For example:
533 stands for a 533MHz system bus provided by this 133MHz CPU
times 4;
400 stands for a 400 system clock provided by a 100 MHz CPU x 4;
(Note: P4 CPU is a quadpumped CPU. The system bus is provided by
the CPU clock x 4. Therefore, user can figure out the P4 CPU clock
from the System Clock devided by 4.)
4) CPU Voltage Vcore: This part depicts the CPU Voltage. For example:
1.5V stands for a CPU of 1.5Vcore.

17
Chapter 2 Hardware Setup
mPGA478B
Pin 1
2-1.2 CPU Installation with Socket 478B
This series is built with CPU Socket 478B ( 478-pin) supporting the
Intel Pentium 4 CPU:
• Follow the steps described in this section to install the 478-pin Pen-
tium 4 CPU into the on board Socket 478.
• After installation of Pentium 4 CPU, you must also install the specific
Pentium 4 CPU fan designed in tandem with this CPU. This CPU
Fan installation is described in next section.
1. First pull sideways the lever of
Socket 478, and then turn it up
900 so as to raise the upper layer
of the socket from the lower
platform.
3. Make sure that all CPU pins have
completely entered the socket
and then lower down the lever
to lock up CPU to socket.
2. Configure Pin 1 of CPU to Pin 1
of the Socket, just as the way
shown in the diagram on the
right. Adjust the position of CPU
until you can feel all CPU pins
get into the socket with ease.
mPGA478B
Intel Pentium 4
mPGA478B
Intel Pentium 4
Pin 1
Pin 1

18
85DRV5 / 85DRV5-L
2-2 Pentium 4 CPU Fan Installation
Connect Fan Connector to CPU FAN connector
Press down 4 corners to lock fan to fanbase
Pentium 4 Fanbase CPU Fan Connector

19
Chapter 2 Hardware Setup
2-3 Memory Installation
184-Pin DIMM Notch Key Definitions (2.5 )
DRAM Key Position oltage Key Position
2.5
Module Latch
• This series supports up to 3GB unbuffered DDR 266/200 SDRAM,
with 3 DDR DIMM slots on board. Do not insert other type of modules
into these slots.
• DDR DIMM slot has 184-pins and one notch. Insert a DDR SDRAM
vertically into the 184-pin slot with the notch-to-rib matching. Press
the Module down in a gradual way until it surely reaches the bottom
and clicks straight up the two latches on the left and right of the slot.
If any one of the latches has not turned up completely, you should
unplug the module and press it down a bit more firmly.
How to tackle the memory Modules:
• Make sure to unplug your power supply before adding or removing
memory module. Failure to do so may cause severe damage to both
your mainboard and the memory module.
• Pay attention to the orientation of the DIMM slots. Forcing a DIMM
into a slot improperly will damage the memory module and slot itself.
• Make sure you have the right type of memory module for your
mainboard.
2-3.1 To Install DDR SDRAM Module
DDR Notch
DDR Rib

2
85DRV5 / 85DRV5-L
DIMM 3
DIMM 1 DIMM 2
PCI 1
PCI 2
PCI 3
PCI 4
PCI 5
PCI 6
FLASH BIOS
Li
Battery
Peripheral Power
Conne tor
+12 Power Conne tor
41
Main Power
Conne tor
SW1
ON DIP
1 2 3 4
VIA
P4x266E
VIA
VT8235
1
mPGA478B
IDE2 IDE1
FDC1
1 3
FAN2
FAN1
1
FAN3
1
1
FAN4
IT8705F
LPC I/O
LPT1
COM1
MIC
GAME/MIDI PORT
LINE OUT
LINE IN
PS/2 K/B¤
(underside)
PS/2 Mouse
(on top)
USB1 (underside)
USB0 (middle)
RJ 45
(on top)
AC'97
Code
JUSB2
1
10
JUSB1
1
10 SCR1
1
14
AUDIO1
1
14
AGP 4X/2X
WOL1
1
RT1
RT2
1
JP1
1
JBAT1
1
JP2
SAPK RST PLED SLED
HDD/LED IR PWR SMI
++
--
+-
1
30
VIA VT6103
PHY (LAN Controller)
CD1
1
3
2
COM2
Audio Code
DDR 266/200
DDR DIMM lots
(184-pin)
2-3.2 To Remove a DIMM
Power off system and press down the holding latches on both sides of
slot to release the module from the DIMM slot.

21
Chapter 2 Hardware Setup
2-4 AGP 4X/2X Card Installation
The AGP slot on board supports 1.5V AGP4X/2X card only.
An AGP 4X card will support a data transfer rate up to 1GB/sec., while
an AGP 2X card will do up to 0.5GB/sec only.
DIMM 3
DIMM 1 DIMM 2
PCI 1
PCI 2
PCI 3
PCI 4
PCI 5
PCI 6
FLASH BIOS
Li
Battery
Peripheral Power
Conne tor
+12 Power Conne tor
41
Main Power
Conne tor
SW1
ON DIP
1 2 3 4
VIA
P4x266E
VIA
VT8235
1
mPGA478B
IDE2 IDE1
FDC1
1 3
FAN2
FAN1
1
FAN3
1
1
FAN4
IT8705F
LPC I/O
LPT1
COM1
MIC
GAME/MIDI PORT
LINE OUT
LINE IN
PS/2 K/B¤
(underside)
PS/2 Mouse
(on top)
USB1 (underside)
USB0 (middle)
RJ 45
(on top)
AC'97
Code
JUSB2
1
10
JUSB1
1
10
SCR1
1
14
AUDIO1
1
14
AGP 4X/2X
WOL1
1
RT1
RT2
1
JP1
1
JBAT1
1
JP2
SAPK RST PLED SLED
HDD/LED IR PWR SMI
++
--
+-
1
30
VIA VT6103
PHY (LAN Controller)
CD1
1
3
2
COM2
Audio Code
DDR 266/200
AGP Accelerator
AGP 4X / 2X

22
85DRV5 / 85DRV5-L
DIMM 3
DIMM 1 DIMM 2
PCI 1
PCI 2
PCI 3
PCI 4
PCI 5
PCI 6
FLASH BIOS
Li
Battery
Peripheral Power
Conne tor
+12 Power Conne tor
41
Main Power
Conne tor
SW1
ON DIP
1 2 3 4
VIA
P4x266E
VIA
VT8235
1
mPGA478B
IDE2 IDE1
FDC1
1 3
FAN2
FAN1
1
FAN3
1
1
FAN4
IT8705F
LPC I/O
LPT1
COM1
MIC
GAME/MIDI PORT
LINE OUT
LINE IN
PS/2 K/B¤
(underside)
PS/2 Mouse
(on top)
USB1 (underside)
USB0 (middle)
RJ 45
(on top)
AC'97
Code
JUSB2
1
10
JUSB1
1
10
SCR1
1
14
AUDIO1
1
14
AGP 4X/2X
WOL1
1
RT1
RT2
1
JP1
1
JBAT1
1
JP2
SAPK RST PLED SLED
HDD/LED IR PWR SMI
++
--
+-
1
30
VIA VT6103
PHY (LAN Controller)
CD1
1
3
2
COM2
Audio Code
DDR 266/200
2-5 IDE Connector Installation
To install IDE Connector, you may connect the blue connector of IDE
cable to the primary (IDE1) or secondary(IDE2) connector on board,
and then connect the gray connector to your slave device and the black
connector to your master device. If you install two hard disks, you must
configure the second drive to Slave mode by setting its jumpers correctly.
Please refer to your hard disk documentation for the jumper settings.
Orient the red line on the
IDE Flat Cable to Pin1.
IDE1
Pin 1 (to Red Line)
IDE2 IDE Connector
dê~ó=ÅçååÉÅíçê
_äìÉ=ÅçååÉÅíçê
IDE Cable
_ä~Åâ=ÅçååÉÅíçê
êÉÇ=äáåÉ
Eqç=j~ëíÉê=F
Eqç=pä~îÉF
Eqç=j~áåÄç~êÇF
UMJÅçåÇìÅíçê=Å~ÄäÉ

23
Chapter 2 Hardware Setup
To install FDC (Floppy Drive Connector), you should connect the end of
FDC cable with single connector to the board , and connect the other
end with two connectors to the floppy drives.
2-6 Flopy Drive Connector ( FDC ) Installation
FDC Cable
To 1st Floppy Drive
To mainboard
To 2nd Floppy Drive
red line
Floppy Drive Connector:
Orient the red line of the
Floppy Flat Cable to Pin1.
Pin 1 (to Red Line)
FDC
DIMM 3
DIMM 1 DIMM 2
PCI 1
PCI 2
PCI 3
PCI 4
PCI 5
PCI 6
FLASH BIOS
Li
Battery
Peripheral Power
Conne tor
+12 Power Conne tor
41
Main Power
Conne tor
SW1
ON DIP
1 2 3 4
VIA
P4x266E
VIA
VT8235
1
mPGA478B
IDE2 IDE1
FDC1
1 3
FAN2
FAN1
1
FAN3
1
1
FAN4
IT8705F
LPC I/O
LPT1
COM1
MIC
GAME/MIDI PORT
LINE OUT
LINE IN
PS/2 K/B¤
(underside)
PS/2 Mouse
(on top)
USB1 (underside)
USB0 (middle)
RJ 45
(on top)
AC'97
Code
JUSB2
1
10
JUSB1
1
10
SCR1
1
14
AUDIO1
1
14
AGP 4X/2X
WOL1
1
RT1
RT2
1
JP1
1
JBAT1
1
JP2
SAPK RST PLED SLED
HDD/LED IR PWR SMI
++
--
+-
1
30
VIA VT6103
PHY (LAN Controller)
CD1
1
3
2
COM2
Audio Code
DDR 266/200
Signal Swap End