Sony SEP-30BT - Rolly™ Sound Entertainment... User manual

SEP-30BT QSG 3-870-835-11(1)
3-870-835-11 (1)
© 2008 Sony Corporation Printed in Malaysia
Quick Start Guide
Sound Entertainment Player
SEP-30BT
To charge the battery, insert the battery into Rolly, and connect Rolly to your computer using the USB cable.
When Rolly’s Play-button indicator turns from orange to yellow, charging is completed.
(When you charge the battery using a Rolly Charging Cradle (not supplied), the Play-button indicator goes out when charging is
completed.)
Rolly is pre-installed with sample music and motion data,
so that you can try it out right after charging the battery.
When you hold Rolly in your hand
Hold Rolly in the vertical position.
Click the Play button to play music. Click it again to stop playback..
Previous
Next
Down
Up
Changing a track
To change a track, turn the upper wheel*
about 45° while music is playing.
To change a group, turn it about 90°.
Adjusting the volume
To turn up the volume, turn the lower
wheel* to the right while music is playing.
To turn down the volume, turn it to the left.
When you hold Rolly in the vertical position with
either end at the top, the wheel at the top or bottom is
automatically assigned to each function.
*Charge the battery Power on

SEP-30BT QSG 3-870-835-11(1)
Place Rolly with the SONY logo facing you.
To play music: Click the Play button.
To play music and motion: Double-click the Play button while
music is playing. When playback of a track is finished, motion
stops. Only music will be played from the next track.
To stop playback, click the Play button once.
When Rolly is placed on a level surface
Perform motion playback on a spacious level surface.
Play-button indicator
The indicator surrounding the Play button changes color to
indicate the status of Rolly during playback.
White: While playing a track with motion assigned
Green: While playing a track without motion assigned
Orange: The remaining battery is not enough to play motion.
Play button
Changing a track You can change a track while only music is playing. You cannot change a track during
motion playback.
To change a track, push the wheel forward or backward a short
distance while music is playing.
To change a group, push the wheel forward or backward further
while music is playing.
Wheel
To locate the next track/group To locate the previous track/group
For details on operations and restrictions (such as the 7-minute maximum play time for motion files) on Rolly, see the Operating
Instructions.
Adjusting the volume You can adjust the volume while only music is playing. You cannot adjust the
volume during motion playback.
To turn up the volume, rotate Rolly clockwise while music is playing.
To turn down the volume, rotate Rolly counterclockwise while music is playing.
Play-button indicator
To turn down the
volume
To turn up the
volume