Sony DFS-700 User manual

DFS-700/P
DME Switcher
DME Switcher
DFS- 700/700 P
NTSC/PAL
Endless Imagination & Creativity
Endless Imagination & Creativity
Powerful Digital Performance
at Your Fingertips!
What happens when you put outstanding digital effects and an advanced digital
switcher together in an extremely compact package? You get the Sony DFS-700/P*—
an ideally proportioned, easy-to-operate switcher incorporating the latest digital
multi effects. Offering the precision of full component digital processing, all the
creativity of hundreds of preset special effects, and the flexibility of 16:9 or 4:3
operation, the DFS-700/P is your promise of top-flight productivity. Cost-effective
yet extremely versatile, Sony’s DFS-700/P will open up new horizons in digital tel-
evision performance.
* The DFS-700/P refers to two models: the DFS-700 (NTSC model) and the DFS-700P (PAL model).
■BKDF-702/P
With the BKDF-702/P, the following 4 inputs (composite or S-Video) can be added to
the standard 8 inputs of the DFS-700/P, making the total number of inputs 12. During
use, any 8 of the 12 inputs can be assigned to the control panel.
General
Model DFS-700 (NTSC)/DFS-700P (PAL)
Power requirements AC 100/120 V, 50/60 Hz (DFS-700)
AC 220/240 V, 50/60 Hz (DFS-700P)
Operating voltage AC 90 to 130 V, 47 to 63 Hz (DFS-700)
AC 180 to 260 V, 47 to 63 Hz (DFS-700P)
Power consumption 200 W
Operating temperature 0 to 40 °C (32 to 104 °F)
Dimensions Control panel: 440 ✕121 ✕287 mm
(W ✕H ✕D) 17 1/4✕4 3/4✕11 1/4inches
Processor unit: 440 ✕132 ✕520 mm
17 1/4✕5 1/4✕20 1/2inches
Weight Control panel: 3 kg, 6 lb 10 oz
Processor unit: 14 kg, 30 lb 14 oz
Input Signals
VIDEO INPUTS
SDI BNC type ✕4
270 Mb/s
Component BNC type ✕4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(DFS-700P)
DSK KEY IN BNC type ✕2, Loop-through, 1.0 Vp-p, 75 Ω
REF VIDEO BNC type ✕2, Loop-through connection
Sync: 0.286 Vp-p (DFS-700)
Sync: 0.3 Vp-p (DFS-700P)
Burst: 0.286 Vp-p (DFS-700)
Burst: 0.3 Vp-p (DFS-700P)
Output Signals
PGM OUT
SDI BNC type ✕2
270 Mb/s
Component BNC type ✕2 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(DFS-700P)
Composite BNC type ✕2
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type ✕2 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω(DFS-700)
C: 0.3 Vp-p at burst, 75 Ω(DFS-700P)
CLEAN OUT BNC type ✕1
SDI: 270 Mb/s
PREVIEW OUT BNC type ✕1, Composite
Video: 1.0 Vp-p, 75 Ω, Sync negative
BLACK BURST OUT BNC type ✕3
Sync: 0.286 Vp-p, 75 Ω(DFS-700)
Sync: 0.3 Vp-p, 75 Ω(DFS-700P)
Burst: 0.286 Vp-p, 75 Ω(DFS-700)
Burst: 0.3 Vp-p, 75 Ω(DFS-700P)
Signal Processing
Sampling rate Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization Y/R-Y/B-Y: 8 bits
Linearity (Composite output) DG: Less than 3.5% (composite input)
Less than 2% (component, S-Video input)
DP: Less than 2.5° (composite input)
Less than 1° (component, S-Video input)
Frequency response 0 to 5 MHz +0.5 dB/-1 dB
S/N More than 50 dB (composite)
More than 55 dB (component, S-Video)
Y/C delay Less than 20 ns (component)
Less than 50 ns (composite, S-Video)
Control Signals
Editor D-sub 9 pin ✕1, RS-422A
GPI/T BNC type ✕2, TTL Level
Panel D-sub 25-pin ✕1
Tally D-sub 25-pin ✕1, Relay contact outputs ✕8
Terminal USB B-type
Optional Accessories
BKDF-701 Digital/Analog Input Board for NTSC/PAL
BKDF-702 Analog Composite Input Board for NTSC
BKDF-702P Analog Composite Input Board for PAL
BKDF-711 2nd Channel DME Board
BKDF-712 3D Video Mapping Effects Board
BZDF-701 DME-LINK Software
BZDF-710 Add-on Effects Software
Input Signals
SDI BNC type ✕4
270 Mb/s
Component BNC type ✕4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(with DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(with DFS-700P)
Input Signals
Composite BNC type ✕4
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type ✕4 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω(BKDF-702)
C: 0.3 Vp-p at burst, 75 Ω(BKDF-702P)
■BKDF-701
With the BKDF-701, the following 8 inputs can be added to the standard 8 inputs of
the DFS-700/P, making the total number of inputs 16. During use, any 8 of the 16
inputs can be assigned to the control panel.
Specifications Processor Unit: Rear Panel
Processor unit
Control panel
Product Configuration
Processor unit, Control panel, D-sub 25-pin control cable (10 m), AC cord,
Instruction manual
■BKDF-711
The BKDF-711 adds a second Title Key.
Printed in USA 10/00
BC-00828-A
MK7410V5SMC00SEP
Distributed by
Sony Electronics Inc.
One Sony Drive
Park Ridge, NJ 07656
www.sony.com/professional
© 2000 Sony Corporation. All rights reserved.
Reproduction in whole or in part without the written permission of Sony is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, Betacam, Betacam SX, Digital SPARKLE, DME LINK, Duality and MPEG IMX are trademarks of Sony.

❚Digital signal processing
The world is moving into digital broadcast-
ing. And if you’re using the DFS-700/P, it’s a
great start as it will prepare you for any
requirement. Digital broadcasting depends
on digital component signals which is why
the DFS-700/P is built around full digital
component processing from input to output
at 4:2:2:4 (video and key). In this way, the
DFS-700/P delivers the quality you’ll need
for digital television broadcasting, digital
satellite, DVD, and a variety of video content
creation. The built-in chroma keyer and
downstream keyer offer full digital signal
processing to satisfy the most demanding
production needs.
QUALITY
by Digitization
❚Wide range of inputs and
outputs including SDI
Whether analog or digital, the DFS-700/P
accomodates a wide range of signal input/ out-
put requirements. The system comes with
eight standard inputs — four SDIs* and four
analog components. With the optional BKDF-
701 or BKDF-702/P boards, you can add eight
or four inputs, making the total number of
inputs 16 or 12 respectively, any eight of
which can be freely assigned to the control
panel. Four SDIs and four analog components
Bridge to
DIGITAL
are added with the BKDF-701, and four com-
posites (composite or Y/C) are added with the
BKDF-702/P. The system also includes a com-
plete range of outputs: two SDIs, two analog
components, two analog composites, and two
Y/Cs. This means you can configure the DFS-
700/P to match existing equipment and antic-
ipate your future needs!
*SDI (Serial Digital Interface): serial component digital signal
(270Mb/s)
❚No need for external A/D
converters
Some digital equipment requires expensive and
cumbersome external analog-to-digital/digital-
to-analog converters. But that’s something
you never have to worry about with the
DFS-700/P. Just take out your analog switcher
and drop in the DFS-700/P. It’s the simple,
easy, cost-effective upgrade that transforms
a tired, old analog system into a creative,
digital powerhouse.
❚ The perfect companion for Sony
digital VTRs and servers
Maybe you’re considering digital production
system with DVCAM, Betacam SX®,
MPEG IMX™ or Digital Betacam®recorders or
the Sony MAV-555 server. And whichever for-
mat you choose, the DFS-700/P is an ideal
complement. With this unit, you get full com-
patibility with analog machines, plus excellent
component digital performance to maintain
digital VTR picture quality. Starting with the
DFS-700/P is a cost-effective first step. You can
then gradually add Sony digital video cameras,
VTRs and servers at your own pace to build an
all-powerful, all-digital system!
❚Fast response for more
productivity
If you’ve ever been held back by the “render-
ing”and“processingtime” of nonlinear editing
systems, you’ll come to appreciate the per-
formance of the DFS-700/P. This is a real-time
system, capable of delivering true 3D, page
turns and effects in an instant. So there’s no
drumming your fingers, no looking at your
watch, no running for coffee. Operation is also
very easy. The addition of optional boards and
software gives you over 800 pre-programmed
special effects that you can recall with the
numeric keypad. Power-packed yet extremely
user-friendly, that’s what the DFS-700/P is all
about.
❚Ergonomic control panel
From simple switching to complex effects, the
ergonomic control panel makes everything
easy. The layout is straightforward and stream-
lined for maximum efficiency. As a result, the
DFS-700/P is an excellent tool for EFP and
remote live broadcasting, where split-second
timing and instant response are absolute
necessities.
Be CREATIVE
SPEEDis Power
❚Switcher function
You can integrate the DFS-700/P into an
existing switcher system as a powerful digital
effects enhancement. But special effects are
only part of the story. The integrated switcher
functions of the DFS-700/P include chroma
keyer, Y/U/V color correction, down stream
keyer, fade-to-black, and frame memory.
❚Editing interface
The DFS-700/P is also a comprehensive
interface with Sony editing controllers. For
example, you can use the DFS-700/P with
Sony BVE-2000/P and PVE-500/P editors via
the serial interface. As a post-production
tool, the DFS-700/P is an editor’s dream.
Systematic
PERFORMANCE
❚Spectacular special effects
The DFS-700/P draws on Sony’s expertise in
high-end nonlinear image processing. This
affordable system incorporates the ground-
breaking effects and capabilities of Sony’s
landmark video editing products. Pre-
programmed and ready-to-use effects include
Fanta Trail and several features from Digital
SPARKLE™ (such as ripple and swirl effects).
Add optional boards and software, and you
have over 800 effects to choose from.
❚2-channel effects
Adding an optional second channel video
board will add a professional touch with two-
channel special effects, such as push-in, push-
out, Duality™ effect (two-channel picture in
picture), combined operations (two-channel
intersect) and brick-like effect.
❚3-dimensional mapping
Three-dimensional special effects can be
impressive but they can also be extremely dif-
ficult to use. The DFS-700/P makes things
easy. The optional 3D Mapping Board delivers
3D effects in a simple, ready-to-use format.
Without wasting significant time on program-
ming, you have easy access to 3D effects such
as 3D cubes, 3D explosion, 3D vase, and 3D
frames. Your productions become more excit-
ing. And most importantly, you become more
creative.
❚Add-on Effects
The DFS-700/P provides an even greater
spectrum of effects with the optional Add-on
Effects software installed. Nearly 130 addi-
tional effects including Crystal Wipe, Multi
Pillars and Polygon V-studio are available with
this software upgrade option, which is easily
loaded from a PC via a single USB connection.
*To use the Add-on Effects software, the 2nd Channel DME board
and 3D Video Mapping board must be installed
❚The simplicity of
pre-programmed effects
Some special effects systems require complex,
tedious programming. Not the DFS-700/P.
With pre-programmed effect patterns, anyone
can create artistic, impressive, amusing, or
stunning visuals. You can concentrate on
expressing your creativity — and let the
DFS-700/P work on the effects. Or if you like,
you can execute partial modifications to the
preset effect pattern and add your own, per-
sonal touch.
❚Live operation
The DFS-700/P cross-point buttons offer
broadcast-grade “feel” for extra durability in
the most extreme applications. For live oper-
ation, the DFS-700/P also offers Preview and
Tally outputs.
❚DME LINK™
The powerful effects of the DFS-700/P are
easy to integrate into a high-end DVS
switcher system. By installing the optional
DME LINK software, DFS-700/P snapshots
can be controlled from the DVS-2000C and
DVS-7000 Series switchers. As with the
Add-on Effects software, this package is
easily installed from a PC.
*Only user program DME LINK is supported
*An Rx/Tx cross cable is required
❚Ideal for any application
The DFS-700/P is an amazingly powerful
integrated switcher with digital multi effects
— ideally suited for newsrooms, post-
production, field editing, small studios and
outside broadcasting systems. It’s the single,
simple solution for today’s demanding digital
requirements.

❚Digital signal processing
The world is moving into digital broadcast-
ing. And if you’re using the DFS-700/P, it’s a
great start as it will prepare you for any
requirement. Digital broadcasting depends
on digital component signals which is why
the DFS-700/P is built around full digital
component processing from input to output
at 4:2:2:4 (video and key). In this way, the
DFS-700/P delivers the quality you’ll need
for digital television broadcasting, digital
satellite, DVD, and a variety of video content
creation. The built-in chroma keyer and
downstream keyer offer full digital signal
processing to satisfy the most demanding
production needs.
QUALITY
by Digitization
❚Wide range of inputs and
outputs including SDI
Whether analog or digital, the DFS-700/P
accomodates a wide range of signal input/ out-
put requirements. The system comes with
eight standard inputs — four SDIs* and four
analog components. With the optional BKDF-
701 or BKDF-702/P boards, you can add eight
or four inputs, making the total number of
inputs 16 or 12 respectively, any eight of
which can be freely assigned to the control
panel. Four SDIs and four analog components
Bridge to
DIGITAL
are added with the BKDF-701, and four com-
posites (composite or Y/C) are added with the
BKDF-702/P. The system also includes a com-
plete range of outputs: two SDIs, two analog
components, two analog composites, and two
Y/Cs. This means you can configure the DFS-
700/P to match existing equipment and antic-
ipate your future needs!
*SDI (Serial Digital Interface): serial component digital signal
(270Mb/s)
❚No need for external A/D
converters
Some digital equipment requires expensive and
cumbersome external analog-to-digital/digital-
to-analog converters. But that’s something
you never have to worry about with the
DFS-700/P. Just take out your analog switcher
and drop in the DFS-700/P. It’s the simple,
easy, cost-effective upgrade that transforms
a tired, old analog system into a creative,
digital powerhouse.
❚ The perfect companion for Sony
digital VTRs and servers
Maybe you’re considering digital production
system with DVCAM, Betacam SX®,
MPEG IMX™ or Digital Betacam®recorders or
the Sony MAV-555 server. And whichever for-
mat you choose, the DFS-700/P is an ideal
complement. With this unit, you get full com-
patibility with analog machines, plus excellent
component digital performance to maintain
digital VTR picture quality. Starting with the
DFS-700/P is a cost-effective first step. You can
then gradually add Sony digital video cameras,
VTRs and servers at your own pace to build an
all-powerful, all-digital system!
❚Fast response for more
productivity
If you’ve ever been held back by the “render-
ing”and“processingtime” of nonlinear editing
systems, you’ll come to appreciate the per-
formance of the DFS-700/P. This is a real-time
system, capable of delivering true 3D, page
turns and effects in an instant. So there’s no
drumming your fingers, no looking at your
watch, no running for coffee. Operation is also
very easy. The addition of optional boards and
software gives you over 800 pre-programmed
special effects that you can recall with the
numeric keypad. Power-packed yet extremely
user-friendly, that’s what the DFS-700/P is all
about.
❚Ergonomic control panel
From simple switching to complex effects, the
ergonomic control panel makes everything
easy. The layout is straightforward and stream-
lined for maximum efficiency. As a result, the
DFS-700/P is an excellent tool for EFP and
remote live broadcasting, where split-second
timing and instant response are absolute
necessities.
Be CREATIVE
SPEEDis Power
❚Switcher function
You can integrate the DFS-700/P into an
existing switcher system as a powerful digital
effects enhancement. But special effects are
only part of the story. The integrated switcher
functions of the DFS-700/P include chroma
keyer, Y/U/V color correction, down stream
keyer, fade-to-black, and frame memory.
❚Editing interface
The DFS-700/P is also a comprehensive
interface with Sony editing controllers. For
example, you can use the DFS-700/P with
Sony BVE-2000/P and PVE-500/P editors via
the serial interface. As a post-production
tool, the DFS-700/P is an editor’s dream.
Systematic
PERFORMANCE
❚Spectacular special effects
The DFS-700/P draws on Sony’s expertise in
high-end nonlinear image processing. This
affordable system incorporates the ground-
breaking effects and capabilities of Sony’s
landmark video editing products. Pre-
programmed and ready-to-use effects include
Fanta Trail and several features from Digital
SPARKLE™ (such as ripple and swirl effects).
Add optional boards and software, and you
have over 800 effects to choose from.
❚2-channel effects
Adding an optional second channel video
board will add a professional touch with two-
channel special effects, such as push-in, push-
out, Duality™ effect (two-channel picture in
picture), combined operations (two-channel
intersect) and brick-like effect.
❚3-dimensional mapping
Three-dimensional special effects can be
impressive but they can also be extremely dif-
ficult to use. The DFS-700/P makes things
easy. The optional 3D Mapping Board delivers
3D effects in a simple, ready-to-use format.
Without wasting significant time on program-
ming, you have easy access to 3D effects such
as 3D cubes, 3D explosion, 3D vase, and 3D
frames. Your productions become more excit-
ing. And most importantly, you become more
creative.
❚Add-on Effects
The DFS-700/P provides an even greater
spectrum of effects with the optional Add-on
Effects software installed. Nearly 130 addi-
tional effects including Crystal Wipe, Multi
Pillars and Polygon V-studio are available with
this software upgrade option, which is easily
loaded from a PC via a single USB connection.
*To use the Add-on Effects software, the 2nd Channel DME board
and 3D Video Mapping board must be installed
❚The simplicity of
pre-programmed effects
Some special effects systems require complex,
tedious programming. Not the DFS-700/P.
With pre-programmed effect patterns, anyone
can create artistic, impressive, amusing, or
stunning visuals. You can concentrate on
expressing your creativity — and let the
DFS-700/P work on the effects. Or if you like,
you can execute partial modifications to the
preset effect pattern and add your own, per-
sonal touch.
❚Live operation
The DFS-700/P cross-point buttons offer
broadcast-grade “feel” for extra durability in
the most extreme applications. For live oper-
ation, the DFS-700/P also offers Preview and
Tally outputs.
❚DME LINK™
The powerful effects of the DFS-700/P are
easy to integrate into a high-end DVS
switcher system. By installing the optional
DME LINK software, DFS-700/P snapshots
can be controlled from the DVS-2000C and
DVS-7000 Series switchers. As with the
Add-on Effects software, this package is
easily installed from a PC.
*Only user program DME LINK is supported
*An Rx/Tx cross cable is required
❚Ideal for any application
The DFS-700/P is an amazingly powerful
integrated switcher with digital multi effects
— ideally suited for newsrooms, post-
production, field editing, small studios and
outside broadcasting systems. It’s the single,
simple solution for today’s demanding digital
requirements.

❚Digital signal processing
The world is moving into digital broadcast-
ing. And if you’re using the DFS-700/P, it’s a
great start as it will prepare you for any
requirement. Digital broadcasting depends
on digital component signals which is why
the DFS-700/P is built around full digital
component processing from input to output
at 4:2:2:4 (video and key). In this way, the
DFS-700/P delivers the quality you’ll need
for digital television broadcasting, digital
satellite, DVD, and a variety of video content
creation. The built-in chroma keyer and
downstream keyer offer full digital signal
processing to satisfy the most demanding
production needs.
QUALITY
by Digitization
❚Wide range of inputs and
outputs including SDI
Whether analog or digital, the DFS-700/P
accomodates a wide range of signal input/ out-
put requirements. The system comes with
eight standard inputs — four SDIs* and four
analog components. With the optional BKDF-
701 or BKDF-702/P boards, you can add eight
or four inputs, making the total number of
inputs 16 or 12 respectively, any eight of
which can be freely assigned to the control
panel. Four SDIs and four analog components
Bridge to
DIGITAL
are added with the BKDF-701, and four com-
posites (composite or Y/C) are added with the
BKDF-702/P. The system also includes a com-
plete range of outputs: two SDIs, two analog
components, two analog composites, and two
Y/Cs. This means you can configure the DFS-
700/P to match existing equipment and antic-
ipate your future needs!
*SDI (Serial Digital Interface): serial component digital signal
(270Mb/s)
❚No need for external A/D
converters
Some digital equipment requires expensive and
cumbersome external analog-to-digital/digital-
to-analog converters. But that’s something
you never have to worry about with the
DFS-700/P. Just take out your analog switcher
and drop in the DFS-700/P. It’s the simple,
easy, cost-effective upgrade that transforms
a tired, old analog system into a creative,
digital powerhouse.
❚ The perfect companion for Sony
digital VTRs and servers
Maybe you’re considering digital production
system with DVCAM, Betacam SX®,
MPEG IMX™ or Digital Betacam®recorders or
the Sony MAV-555 server. And whichever for-
mat you choose, the DFS-700/P is an ideal
complement. With this unit, you get full com-
patibility with analog machines, plus excellent
component digital performance to maintain
digital VTR picture quality. Starting with the
DFS-700/P is a cost-effective first step. You can
then gradually add Sony digital video cameras,
VTRs and servers at your own pace to build an
all-powerful, all-digital system!
❚Fast response for more
productivity
If you’ve ever been held back by the “render-
ing”and“processingtime” of nonlinear editing
systems, you’ll come to appreciate the per-
formance of the DFS-700/P. This is a real-time
system, capable of delivering true 3D, page
turns and effects in an instant. So there’s no
drumming your fingers, no looking at your
watch, no running for coffee. Operation is also
very easy. The addition of optional boards and
software gives you over 800 pre-programmed
special effects that you can recall with the
numeric keypad. Power-packed yet extremely
user-friendly, that’s what the DFS-700/P is all
about.
❚Ergonomic control panel
From simple switching to complex effects, the
ergonomic control panel makes everything
easy. The layout is straightforward and stream-
lined for maximum efficiency. As a result, the
DFS-700/P is an excellent tool for EFP and
remote live broadcasting, where split-second
timing and instant response are absolute
necessities.
Be CREATIVE
SPEEDis Power
❚Switcher function
You can integrate the DFS-700/P into an
existing switcher system as a powerful digital
effects enhancement. But special effects are
only part of the story. The integrated switcher
functions of the DFS-700/P include chroma
keyer, Y/U/V color correction, down stream
keyer, fade-to-black, and frame memory.
❚Editing interface
The DFS-700/P is also a comprehensive
interface with Sony editing controllers. For
example, you can use the DFS-700/P with
Sony BVE-2000/P and PVE-500/P editors via
the serial interface. As a post-production
tool, the DFS-700/P is an editor’s dream.
Systematic
PERFORMANCE
❚Spectacular special effects
The DFS-700/P draws on Sony’s expertise in
high-end nonlinear image processing. This
affordable system incorporates the ground-
breaking effects and capabilities of Sony’s
landmark video editing products. Pre-
programmed and ready-to-use effects include
Fanta Trail and several features from Digital
SPARKLE™ (such as ripple and swirl effects).
Add optional boards and software, and you
have over 800 effects to choose from.
❚2-channel effects
Adding an optional second channel video
board will add a professional touch with two-
channel special effects, such as push-in, push-
out, Duality™ effect (two-channel picture in
picture), combined operations (two-channel
intersect) and brick-like effect.
❚3-dimensional mapping
Three-dimensional special effects can be
impressive but they can also be extremely dif-
ficult to use. The DFS-700/P makes things
easy. The optional 3D Mapping Board delivers
3D effects in a simple, ready-to-use format.
Without wasting significant time on program-
ming, you have easy access to 3D effects such
as 3D cubes, 3D explosion, 3D vase, and 3D
frames. Your productions become more excit-
ing. And most importantly, you become more
creative.
❚Add-on Effects
The DFS-700/P provides an even greater
spectrum of effects with the optional Add-on
Effects software installed. Nearly 130 addi-
tional effects including Crystal Wipe, Multi
Pillars and Polygon V-studio are available with
this software upgrade option, which is easily
loaded from a PC via a single USB connection.
*To use the Add-on Effects software, the 2nd Channel DME board
and 3D Video Mapping board must be installed
❚The simplicity of
pre-programmed effects
Some special effects systems require complex,
tedious programming. Not the DFS-700/P.
With pre-programmed effect patterns, anyone
can create artistic, impressive, amusing, or
stunning visuals. You can concentrate on
expressing your creativity — and let the
DFS-700/P work on the effects. Or if you like,
you can execute partial modifications to the
preset effect pattern and add your own, per-
sonal touch.
❚Live operation
The DFS-700/P cross-point buttons offer
broadcast-grade “feel” for extra durability in
the most extreme applications. For live oper-
ation, the DFS-700/P also offers Preview and
Tally outputs.
❚DME LINK™
The powerful effects of the DFS-700/P are
easy to integrate into a high-end DVS
switcher system. By installing the optional
DME LINK software, DFS-700/P snapshots
can be controlled from the DVS-2000C and
DVS-7000 Series switchers. As with the
Add-on Effects software, this package is
easily installed from a PC.
*Only user program DME LINK is supported
*An Rx/Tx cross cable is required
❚Ideal for any application
The DFS-700/P is an amazingly powerful
integrated switcher with digital multi effects
— ideally suited for newsrooms, post-
production, field editing, small studios and
outside broadcasting systems. It’s the single,
simple solution for today’s demanding digital
requirements.

❚Digital signal processing
The world is moving into digital broadcast-
ing. And if you’re using the DFS-700/P, it’s a
great start as it will prepare you for any
requirement. Digital broadcasting depends
on digital component signals which is why
the DFS-700/P is built around full digital
component processing from input to output
at 4:2:2:4 (video and key). In this way, the
DFS-700/P delivers the quality you’ll need
for digital television broadcasting, digital
satellite, DVD, and a variety of video content
creation. The built-in chroma keyer and
downstream keyer offer full digital signal
processing to satisfy the most demanding
production needs.
QUALITY
by Digitization
❚Wide range of inputs and
outputs including SDI
Whether analog or digital, the DFS-700/P
accomodates a wide range of signal input/ out-
put requirements. The system comes with
eight standard inputs — four SDIs* and four
analog components. With the optional BKDF-
701 or BKDF-702/P boards, you can add eight
or four inputs, making the total number of
inputs 16 or 12 respectively, any eight of
which can be freely assigned to the control
panel. Four SDIs and four analog components
Bridge to
DIGITAL
are added with the BKDF-701, and four com-
posites (composite or Y/C) are added with the
BKDF-702/P. The system also includes a com-
plete range of outputs: two SDIs, two analog
components, two analog composites, and two
Y/Cs. This means you can configure the DFS-
700/P to match existing equipment and antic-
ipate your future needs!
*SDI (Serial Digital Interface): serial component digital signal
(270Mb/s)
❚No need for external A/D
converters
Some digital equipment requires expensive and
cumbersome external analog-to-digital/digital-
to-analog converters. But that’s something
you never have to worry about with the
DFS-700/P. Just take out your analog switcher
and drop in the DFS-700/P. It’s the simple,
easy, cost-effective upgrade that transforms
a tired, old analog system into a creative,
digital powerhouse.
❚ The perfect companion for Sony
digital VTRs and servers
Maybe you’re considering digital production
system with DVCAM, Betacam SX®,
MPEG IMX™ or Digital Betacam®recorders or
the Sony MAV-555 server. And whichever for-
mat you choose, the DFS-700/P is an ideal
complement. With this unit, you get full com-
patibility with analog machines, plus excellent
component digital performance to maintain
digital VTR picture quality. Starting with the
DFS-700/P is a cost-effective first step. You can
then gradually add Sony digital video cameras,
VTRs and servers at your own pace to build an
all-powerful, all-digital system!
❚Fast response for more
productivity
If you’ve ever been held back by the “render-
ing”and“processingtime” of nonlinear editing
systems, you’ll come to appreciate the per-
formance of the DFS-700/P. This is a real-time
system, capable of delivering true 3D, page
turns and effects in an instant. So there’s no
drumming your fingers, no looking at your
watch, no running for coffee. Operation is also
very easy. The addition of optional boards and
software gives you over 800 pre-programmed
special effects that you can recall with the
numeric keypad. Power-packed yet extremely
user-friendly, that’s what the DFS-700/P is all
about.
❚Ergonomic control panel
From simple switching to complex effects, the
ergonomic control panel makes everything
easy. The layout is straightforward and stream-
lined for maximum efficiency. As a result, the
DFS-700/P is an excellent tool for EFP and
remote live broadcasting, where split-second
timing and instant response are absolute
necessities.
Be CREATIVE
SPEEDis Power
❚Switcher function
You can integrate the DFS-700/P into an
existing switcher system as a powerful digital
effects enhancement. But special effects are
only part of the story. The integrated switcher
functions of the DFS-700/P include chroma
keyer, Y/U/V color correction, down stream
keyer, fade-to-black, and frame memory.
❚Editing interface
The DFS-700/P is also a comprehensive
interface with Sony editing controllers. For
example, you can use the DFS-700/P with
Sony BVE-2000/P and PVE-500/P editors via
the serial interface. As a post-production
tool, the DFS-700/P is an editor’s dream.
Systematic
PERFORMANCE
❚Spectacular special effects
The DFS-700/P draws on Sony’s expertise in
high-end nonlinear image processing. This
affordable system incorporates the ground-
breaking effects and capabilities of Sony’s
landmark video editing products. Pre-
programmed and ready-to-use effects include
Fanta Trail and several features from Digital
SPARKLE™ (such as ripple and swirl effects).
Add optional boards and software, and you
have over 800 effects to choose from.
❚2-channel effects
Adding an optional second channel video
board will add a professional touch with two-
channel special effects, such as push-in, push-
out, Duality™ effect (two-channel picture in
picture), combined operations (two-channel
intersect) and brick-like effect.
❚3-dimensional mapping
Three-dimensional special effects can be
impressive but they can also be extremely dif-
ficult to use. The DFS-700/P makes things
easy. The optional 3D Mapping Board delivers
3D effects in a simple, ready-to-use format.
Without wasting significant time on program-
ming, you have easy access to 3D effects such
as 3D cubes, 3D explosion, 3D vase, and 3D
frames. Your productions become more excit-
ing. And most importantly, you become more
creative.
❚Add-on Effects
The DFS-700/P provides an even greater
spectrum of effects with the optional Add-on
Effects software installed. Nearly 130 addi-
tional effects including Crystal Wipe, Multi
Pillars and Polygon V-studio are available with
this software upgrade option, which is easily
loaded from a PC via a single USB connection.
*To use the Add-on Effects software, the 2nd Channel DME board
and 3D Video Mapping board must be installed
❚The simplicity of
pre-programmed effects
Some special effects systems require complex,
tedious programming. Not the DFS-700/P.
With pre-programmed effect patterns, anyone
can create artistic, impressive, amusing, or
stunning visuals. You can concentrate on
expressing your creativity — and let the
DFS-700/P work on the effects. Or if you like,
you can execute partial modifications to the
preset effect pattern and add your own, per-
sonal touch.
❚Live operation
The DFS-700/P cross-point buttons offer
broadcast-grade “feel” for extra durability in
the most extreme applications. For live oper-
ation, the DFS-700/P also offers Preview and
Tally outputs.
❚DME LINK™
The powerful effects of the DFS-700/P are
easy to integrate into a high-end DVS
switcher system. By installing the optional
DME LINK software, DFS-700/P snapshots
can be controlled from the DVS-2000C and
DVS-7000 Series switchers. As with the
Add-on Effects software, this package is
easily installed from a PC.
*Only user program DME LINK is supported
*An Rx/Tx cross cable is required
❚Ideal for any application
The DFS-700/P is an amazingly powerful
integrated switcher with digital multi effects
— ideally suited for newsrooms, post-
production, field editing, small studios and
outside broadcasting systems. It’s the single,
simple solution for today’s demanding digital
requirements.

DFS-700/P
DME Switcher
DME Switcher
DFS- 700/700 P
NTSC/PAL
Endless Imagination & Creativity
Endless Imagination & Creativity
Powerful Digital Performance
at Your Fingertips!
What happens when you put outstanding digital effects and an advanced digital
switcher together in an extremely compact package? You get the Sony DFS-700/P*—
an ideally proportioned, easy-to-operate switcher incorporating the latest digital
multi effects. Offering the precision of full component digital processing, all the
creativity of hundreds of preset special effects, and the flexibility of 16:9 or 4:3
operation, the DFS-700/P is your promise of top-flight productivity. Cost-effective
yet extremely versatile, Sony’s DFS-700/P will open up new horizons in digital tel-
evision performance.
* The DFS-700/P refers to two models: the DFS-700 (NTSC model) and the DFS-700P (PAL model).
■BKDF-702/P
With the BKDF-702/P, the following 4 inputs (composite or S-Video) can be added to
the standard 8 inputs of the DFS-700/P, making the total number of inputs 12. During
use, any 8 of the 12 inputs can be assigned to the control panel.
General
Model DFS-700 (NTSC)/DFS-700P (PAL)
Power requirements AC 100/120 V, 50/60 Hz (DFS-700)
AC 220/240 V, 50/60 Hz (DFS-700P)
Operating voltage AC 90 to 130 V, 47 to 63 Hz (DFS-700)
AC 180 to 260 V, 47 to 63 Hz (DFS-700P)
Power consumption 200 W
Operating temperature 0 to 40 °C (32 to 104 °F)
Dimensions Control panel: 440 ✕121 ✕287 mm
(W ✕H ✕D) 17 1/4✕4 3/4✕11 1/4inches
Processor unit: 440 ✕132 ✕520 mm
17 1/4✕5 1/4✕20 1/2inches
Weight Control panel: 3 kg, 6 lb 10 oz
Processor unit: 14 kg, 30 lb 14 oz
Input Signals
VIDEO INPUTS
SDI BNC type ✕4
270 Mb/s
Component BNC type ✕4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(DFS-700P)
DSK KEY IN BNC type ✕2, Loop-through, 1.0 Vp-p, 75 Ω
REF VIDEO BNC type ✕2, Loop-through connection
Sync: 0.286 Vp-p (DFS-700)
Sync: 0.3 Vp-p (DFS-700P)
Burst: 0.286 Vp-p (DFS-700)
Burst: 0.3 Vp-p (DFS-700P)
Output Signals
PGM OUT
SDI BNC type ✕2
270 Mb/s
Component BNC type ✕2 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(DFS-700P)
Composite BNC type ✕2
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type ✕2 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω(DFS-700)
C: 0.3 Vp-p at burst, 75 Ω(DFS-700P)
CLEAN OUT BNC type ✕1
SDI: 270 Mb/s
PREVIEW OUT BNC type ✕1, Composite
Video: 1.0 Vp-p, 75 Ω, Sync negative
BLACK BURST OUT BNC type ✕3
Sync: 0.286 Vp-p, 75 Ω(DFS-700)
Sync: 0.3 Vp-p, 75 Ω(DFS-700P)
Burst: 0.286 Vp-p, 75 Ω(DFS-700)
Burst: 0.3 Vp-p, 75 Ω(DFS-700P)
Signal Processing
Sampling rate Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization Y/R-Y/B-Y: 8 bits
Linearity (Composite output) DG: Less than 3.5% (composite input)
Less than 2% (component, S-Video input)
DP: Less than 2.5° (composite input)
Less than 1° (component, S-Video input)
Frequency response 0 to 5 MHz +0.5 dB/-1 dB
S/N More than 50 dB (composite)
More than 55 dB (component, S-Video)
Y/C delay Less than 20 ns (component)
Less than 50 ns (composite, S-Video)
Control Signals
Editor D-sub 9 pin ✕1, RS-422A
GPI/T BNC type ✕2, TTL Level
Panel D-sub 25-pin ✕1
Tally D-sub 25-pin ✕1, Relay contact outputs ✕8
Terminal USB B-type
Optional Accessories
BKDF-701 Digital/Analog Input Board for NTSC/PAL
BKDF-702 Analog Composite Input Board for NTSC
BKDF-702P Analog Composite Input Board for PAL
BKDF-711 2nd Channel DME Board
BKDF-712 3D Video Mapping Effects Board
BZDF-701 DME-LINK Software
BZDF-710 Add-on Effects Software
Input Signals
SDI BNC type ✕4
270 Mb/s
Component BNC type ✕4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(with DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(with DFS-700P)
Input Signals
Composite BNC type ✕4
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type ✕4 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω(BKDF-702)
C: 0.3 Vp-p at burst, 75 Ω(BKDF-702P)
■BKDF-701
With the BKDF-701, the following 8 inputs can be added to the standard 8 inputs of
the DFS-700/P, making the total number of inputs 16. During use, any 8 of the 16
inputs can be assigned to the control panel.
Specifications Processor Unit: Rear Panel
Processor unit
Control panel
Product Configuration
Processor unit, Control panel, D-sub 25-pin control cable (10 m), AC cord,
Instruction manual
■BKDF-711
The BKDF-711 adds a second Title Key.
Printed in USA 10/00
BC-00828-A
MK7410V5SMC00SEP
Distributed by
Sony Electronics Inc.
One Sony Drive
Park Ridge, NJ 07656
www.sony.com/professional
© 2000 Sony Corporation. All rights reserved.
Reproduction in whole or in part without the written permission of Sony is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, Betacam, Betacam SX, Digital SPARKLE, DME LINK, Duality and MPEG IMX are trademarks of Sony.

DFS-700/P
DME Switcher
DME Switcher
DFS- 700/700 P
NTSC/PAL
Endless Imagination & Creativity
Endless Imagination & Creativity
Powerful Digital Performance
at Your Fingertips!
What happens when you put outstanding digital effects and an advanced digital
switcher together in an extremely compact package? You get the Sony DFS-700/P*—
an ideally proportioned, easy-to-operate switcher incorporating the latest digital
multi effects. Offering the precision of full component digital processing, all the
creativity of hundreds of preset special effects, and the flexibility of 16:9 or 4:3
operation, the DFS-700/P is your promise of top-flight productivity. Cost-effective
yet extremely versatile, Sony’s DFS-700/P will open up new horizons in digital tel-
evision performance.
* The DFS-700/P refers to two models: the DFS-700 (NTSC model) and the DFS-700P (PAL model).
■BKDF-702/P
With the BKDF-702/P, the following 4 inputs (composite or S-Video) can be added to
the standard 8 inputs of the DFS-700/P, making the total number of inputs 12. During
use, any 8 of the 12 inputs can be assigned to the control panel.
General
Model DFS-700 (NTSC)/DFS-700P (PAL)
Power requirements AC 100/120 V, 50/60 Hz (DFS-700)
AC 220/240 V, 50/60 Hz (DFS-700P)
Operating voltage AC 90 to 130 V, 47 to 63 Hz (DFS-700)
AC 180 to 260 V, 47 to 63 Hz (DFS-700P)
Power consumption 200 W
Operating temperature 0 to 40 °C (32 to 104 °F)
Dimensions Control panel: 440 ✕121 ✕287 mm
(W ✕H ✕D) 17 1/4✕4 3/4✕11 1/4inches
Processor unit: 440 ✕132 ✕520 mm
17 1/4✕5 1/4✕20 1/2inches
Weight Control panel: 3 kg, 6 lb 10 oz
Processor unit: 14 kg, 30 lb 14 oz
Input Signals
VIDEO INPUTS
SDI BNC type ✕4
270 Mb/s
Component BNC type ✕4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(DFS-700P)
DSK KEY IN BNC type ✕2, Loop-through, 1.0 Vp-p, 75 Ω
REF VIDEO BNC type ✕2, Loop-through connection
Sync: 0.286 Vp-p (DFS-700)
Sync: 0.3 Vp-p (DFS-700P)
Burst: 0.286 Vp-p (DFS-700)
Burst: 0.3 Vp-p (DFS-700P)
Output Signals
PGM OUT
SDI BNC type ✕2
270 Mb/s
Component BNC type ✕2 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(DFS-700P)
Composite BNC type ✕2
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type ✕2 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω(DFS-700)
C: 0.3 Vp-p at burst, 75 Ω(DFS-700P)
CLEAN OUT BNC type ✕1
SDI: 270 Mb/s
PREVIEW OUT BNC type ✕1, Composite
Video: 1.0 Vp-p, 75 Ω, Sync negative
BLACK BURST OUT BNC type ✕3
Sync: 0.286 Vp-p, 75 Ω(DFS-700)
Sync: 0.3 Vp-p, 75 Ω(DFS-700P)
Burst: 0.286 Vp-p, 75 Ω(DFS-700)
Burst: 0.3 Vp-p, 75 Ω(DFS-700P)
Signal Processing
Sampling rate Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization Y/R-Y/B-Y: 8 bits
Linearity (Composite output) DG: Less than 3.5% (composite input)
Less than 2% (component, S-Video input)
DP: Less than 2.5° (composite input)
Less than 1° (component, S-Video input)
Frequency response 0 to 5 MHz +0.5 dB/-1 dB
S/N More than 50 dB (composite)
More than 55 dB (component, S-Video)
Y/C delay Less than 20 ns (component)
Less than 50 ns (composite, S-Video)
Control Signals
Editor D-sub 9 pin ✕1, RS-422A
GPI/T BNC type ✕2, TTL Level
Panel D-sub 25-pin ✕1
Tally D-sub 25-pin ✕1, Relay contact outputs ✕8
Terminal USB B-type
Optional Accessories
BKDF-701 Digital/Analog Input Board for NTSC/PAL
BKDF-702 Analog Composite Input Board for NTSC
BKDF-702P Analog Composite Input Board for PAL
BKDF-711 2nd Channel DME Board
BKDF-712 3D Video Mapping Effects Board
BZDF-701 DME-LINK Software
BZDF-710 Add-on Effects Software
Input Signals
SDI BNC type ✕4
270 Mb/s
Component BNC type ✕4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(with DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(with DFS-700P)
Input Signals
Composite BNC type ✕4
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type ✕4 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω(BKDF-702)
C: 0.3 Vp-p at burst, 75 Ω(BKDF-702P)
■BKDF-701
With the BKDF-701, the following 8 inputs can be added to the standard 8 inputs of
the DFS-700/P, making the total number of inputs 16. During use, any 8 of the 16
inputs can be assigned to the control panel.
Specifications Processor Unit: Rear Panel
Processor unit
Control panel
Product Configuration
Processor unit, Control panel, D-sub 25-pin control cable (10 m), AC cord,
Instruction manual
■BKDF-711
The BKDF-711 adds a second Title Key.
Printed in USA 10/00
BC-00828-A
MK7410V5SMC00SEP
Distributed by
Sony Electronics Inc.
One Sony Drive
Park Ridge, NJ 07656
www.sony.com/professional
© 2000 Sony Corporation. All rights reserved.
Reproduction in whole or in part without the written permission of Sony is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, Betacam, Betacam SX, Digital SPARKLE, DME LINK, Duality and MPEG IMX are trademarks of Sony.

DFS-700/P
DME Switcher
DME Switcher
DFS- 700/700 P
NTSC/PAL
Endless Imagination & Creativity
Endless Imagination & Creativity
Powerful Digital Performance
at Your Fingertips!
What happens when you put outstanding digital effects and an advanced digital
switcher together in an extremely compact package? You get the Sony DFS-700/P*—
an ideally proportioned, easy-to-operate switcher incorporating the latest digital
multi effects. Offering the precision of full component digital processing, all the
creativity of hundreds of preset special effects, and the flexibility of 16:9 or 4:3
operation, the DFS-700/P is your promise of top-flight productivity. Cost-effective
yet extremely versatile, Sony’s DFS-700/P will open up new horizons in digital tel-
evision performance.
* The DFS-700/P refers to two models: the DFS-700 (NTSC model) and the DFS-700P (PAL model).
■BKDF-702/P
With the BKDF-702/P, the following 4 inputs (composite or S-Video) can be added to
the standard 8 inputs of the DFS-700/P, making the total number of inputs 12. During
use, any 8 of the 12 inputs can be assigned to the control panel.
General
Model DFS-700 (NTSC)/DFS-700P (PAL)
Power requirements AC 100/120 V, 50/60 Hz (DFS-700)
AC 220/240 V, 50/60 Hz (DFS-700P)
Operating voltage AC 90 to 130 V, 47 to 63 Hz (DFS-700)
AC 180 to 260 V, 47 to 63 Hz (DFS-700P)
Power consumption 200 W
Operating temperature 0 to 40 °C (32 to 104 °F)
Dimensions Control panel: 440 ✕121 ✕287 mm
(W ✕H ✕D) 17 1/4✕4 3/4✕11 1/4inches
Processor unit: 440 ✕132 ✕520 mm
17 1/4✕5 1/4✕20 1/2inches
Weight Control panel: 3 kg, 6 lb 10 oz
Processor unit: 14 kg, 30 lb 14 oz
Input Signals
VIDEO INPUTS
SDI BNC type ✕4
270 Mb/s
Component BNC type ✕4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(DFS-700P)
DSK KEY IN BNC type ✕2, Loop-through, 1.0 Vp-p, 75 Ω
REF VIDEO BNC type ✕2, Loop-through connection
Sync: 0.286 Vp-p (DFS-700)
Sync: 0.3 Vp-p (DFS-700P)
Burst: 0.286 Vp-p (DFS-700)
Burst: 0.3 Vp-p (DFS-700P)
Output Signals
PGM OUT
SDI BNC type ✕2
270 Mb/s
Component BNC type ✕2 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(DFS-700P)
Composite BNC type ✕2
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type ✕2 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω(DFS-700)
C: 0.3 Vp-p at burst, 75 Ω(DFS-700P)
CLEAN OUT BNC type ✕1
SDI: 270 Mb/s
PREVIEW OUT BNC type ✕1, Composite
Video: 1.0 Vp-p, 75 Ω, Sync negative
BLACK BURST OUT BNC type ✕3
Sync: 0.286 Vp-p, 75 Ω(DFS-700)
Sync: 0.3 Vp-p, 75 Ω(DFS-700P)
Burst: 0.286 Vp-p, 75 Ω(DFS-700)
Burst: 0.3 Vp-p, 75 Ω(DFS-700P)
Signal Processing
Sampling rate Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization Y/R-Y/B-Y: 8 bits
Linearity (Composite output) DG: Less than 3.5% (composite input)
Less than 2% (component, S-Video input)
DP: Less than 2.5° (composite input)
Less than 1° (component, S-Video input)
Frequency response 0 to 5 MHz +0.5 dB/-1 dB
S/N More than 50 dB (composite)
More than 55 dB (component, S-Video)
Y/C delay Less than 20 ns (component)
Less than 50 ns (composite, S-Video)
Control Signals
Editor D-sub 9 pin ✕1, RS-422A
GPI/T BNC type ✕2, TTL Level
Panel D-sub 25-pin ✕1
Tally D-sub 25-pin ✕1, Relay contact outputs ✕8
Terminal USB B-type
Optional Accessories
BKDF-701 Digital/Analog Input Board for NTSC/PAL
BKDF-702 Analog Composite Input Board for NTSC
BKDF-702P Analog Composite Input Board for PAL
BKDF-711 2nd Channel DME Board
BKDF-712 3D Video Mapping Effects Board
BZDF-701 DME-LINK Software
BZDF-710 Add-on Effects Software
Input Signals
SDI BNC type ✕4
270 Mb/s
Component BNC type ✕4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω(with DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω(with DFS-700P)
Input Signals
Composite BNC type ✕4
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type ✕4 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω(BKDF-702)
C: 0.3 Vp-p at burst, 75 Ω(BKDF-702P)
■BKDF-701
With the BKDF-701, the following 8 inputs can be added to the standard 8 inputs of
the DFS-700/P, making the total number of inputs 16. During use, any 8 of the 16
inputs can be assigned to the control panel.
Specifications Processor Unit: Rear Panel
Processor unit
Control panel
Product Configuration
Processor unit, Control panel, D-sub 25-pin control cable (10 m), AC cord,
Instruction manual
■BKDF-711
The BKDF-711 adds a second Title Key.
Printed in USA 10/00
BC-00828-A
MK7410V5SMC00SEP
Distributed by
Sony Electronics Inc.
One Sony Drive
Park Ridge, NJ 07656
www.sony.com/professional
© 2000 Sony Corporation. All rights reserved.
Reproduction in whole or in part without the written permission of Sony is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, Betacam, Betacam SX, Digital SPARKLE, DME LINK, Duality and MPEG IMX are trademarks of Sony.