Soundstream VR-620HB User manual

Phone Link

Enter disc play mode, automatically
Enter radio mode,listen to FM/AM play the disc in the machine
Only.connected to the phone can be
Enter the system setup interface
used
Enter USB play mode (only valid when
Enter in the rear view (only valid if a
a usb device is connected
backup camera is connected
)
Enter AUX play mode (only valid when
Enter SD card play mode (only valid
an AUX device is connected) when an SD card is connected)
Choose form 12 preset background
Turn off the screen display ,touch the
images
screen to turn it back on
Enter Bluetooth interface,achieve
Display date and time
Handsfree talk function
In radio mode-change frequency
In song mode-switch,play,pause
The unit is designed for 10V-16V DC negative ground operation system only. Before
installingthe unit, make sure your vehicle is connected to DC10V-16V negative ground
electrical system.
The negative battery terminal must be disconnected before making connections, which
canreduce damaging the unit due to short circuit.
Be sure to connect the color coded leads correctly according to the diagram. Incorrectcon-
nections may cause the unit malfunction or damage the vehicle's electrical system .
Be sure the connect the speaker (- ) leads to the speaker (-) terminal. Never connectthe left
and right channel speaker cables each other or to the vehicle body.
Do not block vents or radiator panel. Blocking them will cause heat tobuild up inside and
may result in fire.
After the completion of the installation and begin to play the unit (including replacingthe
battery), please press the RESET button on the front panel with pointed objects (Such as
ball-point pen) to set the un.

3. WIRING DIAGRAM 4 REMOTE CONTROL OPERATION.
23 4 Basic Operations
Installing the lithium coin battery (CR2025)
1
Aim the remote control directly at the remote sensor on the unit
515
16 DO NOT expose the remote sensor to strong light
617
18
719
9WARNING: To prevent accidents and damage
21
820
11 23 DO NOT install any batteryotherthan CR2025 or its equivalent
10 22
25 Store the battery in a safe place where children cannot reach
12
13 24 DO NOT charge, decompose, heat up, the battery or disposeit in a re.
14 DO NOT poke or piercethe battery with tweezers or similar tools.
26 Wrapthe battery withtapefor insulation whenthrowing it away
keeping it for future use.
Brown: KEY1 Pink: Braking Brown & Black: KEY2 Yellow: Battery +
Orange: Illumination + Grey & Black: Front Right Speaker - Blue & Black: IR Blue: Auto Antenna +
Red: Ignition 12V+, ACC Grey: Front Right Speaker + Can-Bus Only Orange & Black: Reverse
White & Black: Front Left Speaker - Purple: Rear Right Speaker + Can-Bus Only Green & Black: Rear Left Speaker - ①(power switch) 1
4 0-10+ (numbers)
White: Front Left Speaker + Purple & Black: Rear Right Speaker - Black: Ground Green: Rear Left Speaker +
②MODE & Answer 1
5 SUB-T (subtitle)
Notice
Please remove the two screws which protect ③(play/pause) 1
6 Title
the loader of the DVD player before using!
④(mute) 1
7 Setup
⑤BND/SYS (band/system) & Hang up 1
8 Slow
1.Brown: KEY1 A.Brown & Black: KEY2
2.Orange: Illumination + B.Blue & Black: IR ⑥up/down/left/right/ENTER 1
9 Angle
3.Red: Ignition 12V ACC C.Can-Bus Only ⑦(stop) 2
0 Zoom
4.White & Black: Front Left Speaker - D.Can-Bus Only ⑧ AMS/RPT (auto scan memory/repeat) 2
1 VOL+ (volume up)
5.White: Front Left Speaker + E.Black: Ground ⑨ST/PROG (stereo/program) 2
2 SEEK+/ (scan+/next track)
6.Pink: Parking F.Yellow: Battery + ⑩ LOC/RDM (long/short range switch/random) 2
3 SEL(acoustic characteristic)
7.Grey & Black: Front Right Speaker - G.Blue: Auto Antenna
11 SEEK- / (scan-/last track) 2
4 Audio (dialogue)
8.Grey: Front Right Speaker + H.Orange & Black: Reverse
12 PBC (menu) 2
5 VOL- (volume down)
9.Purple: Rear Right Speaker + I.Green & Black: Rear Left Speaker -
10.Purple & Black: Rear Right Speaker - J.Green: Rear Left Speaker + 13 OSD (on screen display) 2
6 GOTO (play time setup)
3 4

display.

to pop up the video setting box.

connected to the audio and video input port.
to turn off screen display,touch the screen for returning to display
to exit the AUX mode to the system main interface.
PHONE LINK
Corresponding to the role of the icon
Exit the phone link quit
Volume adjustment
Return to the mobile home bage
Return to the prvious operation
Sreensave
Force landscape

Enter the dial up interface
BT name:CAR-BT

(Mute when reversing vehicles

.
Touch panel calibration
Radio regional settings
Wallpaper
Steps for setting:
i
j
North America North America

to clear the functions set,and follow the above steps
k