Southern Enterprises Barksdale KA326400TX User manual

Page 1
PO：
KA326400TX
Barksdale 3pc Breakfast Set
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seifurniturestore.com

A Quantity
of 1
Top Panel
B Quantity
of 1
Right Side Frame
C Quantity
of 1
Center Frame
D Quantity
of 1
Left Side Frame
E Quantity
of 2
Seat Panel
F Quantity
of 4
Stool Side Frame
G Quantity
of 1
Bottom Panel
H Quantity
of 2
Fixed Shelf
I Quantity
of 1
Back Panel
Barksdale 3pc Breakfast Set
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
Page 2

J Quantity
of 2
Connecting bar
K Quantity
of 12
Stool Side rail
L Quantity
of 1
Drawer
M Quantity
of 2
Basket Frame
N Quantity
of 2
Basket Bottom Panel
1 Quantity
of 22
Short Bolt \Φ1/4"*1-1/4"L
2 Quantity
of 32
Long Bolt Φ1/4"*1-1/2"L
3 Quantity
of 24
Nut
4 Quantity
of 22
Flat Washer
5 Quantity
of 22
Spring Washer
6 Quantity
of 1
Allen Wrench
7 Quantity
of 24
Wood Plug
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth. Avoid rubbing
or scratching the surface with rough or abrasive objects.
For replacement parts or questions, please call SEI
customer service at 1-800-633-5096.
Page 3

Figure 1
Line up Right Side Frame (B) and Center
Frame (C) to Fixed Shelves (H) and
Connecting Bars (J).
Figure 2
Secure Center Frame (C) and Right Side
Frame (B) to Fixed Shelves (H) using
Short Bolts (1), Spring Washers (5), and
Flat Washers (4).
Tighten Bolts (1) with Allen Wrench (6)
Barksdale 3pc Breakfast Set
Assembly Instructions
Page 4
H
BC
J
J
H
5
1
4
6
H
C
B
J
H

Figure 3
Attach the assembled unit to Bottom
Panel (G),Left Side Panel (D),and Back
Panel (I) using Short Bolts (1), Spring
Washers (5), and Flat Washers (4).
Tighten Bolts (1) with Allen Wrench (6).
Figure 4
Line up the assembled unit with Top
Panel (A).
Page 5
4
6
5
1
CD
I
G
4
65
1
A
B
D

Figure 5
Attach assembled unit to Top Panel (A)
using Short Bolts (1), Spring Washers (5),
and Flat Washers (4).
Tighten Bolts (1) with Allen Wrench (6).
Figure 6
Turn the assembled table over.
Insert pre-assembled drawer (L).
Make sure drawer smoothly slides in and
out.
A
5
1
4
6
BD
C
L
DB
Page 6

Figure 7
Open the folding Basket Frame (M).
Figure 8
Insert Basket Bottom panel (N) into
Basket Frame (M).
M
M
N
Page 7

Figure 9
Place the assembled baskets on Fixed
Shelves (H).
Figure 10
Now the table is ready to use.
H
H
Page 8

Figure 11
Attach Stool Side Frames (F) to Stool Side
Rails (K).
Insert Nuts (3) into pre-drilled holes on
Stool Side Rails (K).
Insert Long Bolts (2) through pre-drilled
holes on Stool Side Frames (F) into Nuts
(3).
Tighten Long Bolts (2) with Allen Wrench
(6).
Figure 12
Cover the holes on Stool Side Frames (F)
using Wood Plugs (7).
Page 9
K
F
2
6
3
F
7
FF

Figure 13
Attach the assembled unit to Seat
Panel (E), using Long Bolts (2).
Tighten Bolts (2) with Allen Wrench (6)
Figure 14
Turn the assembled stool over and it is
ready to use.
Repeat steps 11-14 for 2
nd
stool.
Page10
F
2
6
E
K
2