Southern Enterprises MS040100TX User manual

Page |
1
PO#:
MS040100TX
Marcell Media Console
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.sei
furniturestore
.com

Page |
2
1) Quantity
of 1
Top Panel
2) Quantity
of 1
Left Side Panel
3) Quantity
of 1
Right Side Panel
4) Quantity
of 1
Left Front Panel
5) Quantity
of 1
Right Front Panel
6)Quantity
of 1
Shelf Panel
7) Quantity
of 1
Middle Panel
8) Quantity
of 1
Bottom Panel
9) Quantity
of 1
Back Panel
10) Quantity
of 1
Left Door Panel
11) Quantity
of 1
Right Door Panel
12) Quantity
of 2
Adjustable Shelf Panel
A) Quantity
of 26
Cam Bolts
B) Quantity
of 26
Cam Locks
C) Quantity
of 20
Wood Dowels Dia. 5/16"x1-1/4"
Marcell Media Console
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or a
blanket. Check that you have all parts indicated. Call customer service if any hardware is missing. Before beginning assembly, carefully
study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.

Page |
3
D ) Quantity
of 27
Screw Dia. 1/8” x 1/2”L
E)Quantity
o f 2
Magnet
F)Quantity
o f 2
Knob
G) Quantity
of 4
Bolts
Dia. 5/32”x 1/2”L
H) Quantity
of 2
Magnet Plate
I) Quantity
of 2
Screw Dia 1/8” x 1/2”L
J) Quantity
of 4
Hinge
K) Quantity
of 32
Screw Dia 1/8” x 5/8”L
L) Quantity
of 8
Shelf Pin
M) Quantity
of 12
Adhesive Pad
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please call
SEI Customer Service at 1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver
(Not Included)

Page |
4
Do not overtighten cam bolts. Stop when they feel secure.
Figure 1
Align Cam Bolts (A) by hand.
Insert Cam Locks (B) into corresponding
holes on Side Panels (2/3).
Screw Cam Bolts (A) into threaded holes
on Front Panels (4/5).
Attach Front Panels (4/5) to Side Panels
(2/3) by inserting Cam Bolts (A) and Wood
Dowels (C) into corresponding holes until
all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver (not included).
Figure 2
Align Cam Bolts (A) by hand.
Insert Cam Locks (B) into corresponding
holes on Middle Panel (7).
Screw Cam Bolts (A) into threaded holes
on Shelf Panel (6).
Attach Shelf Panel (6) to Middle Panel (7)
by inserting Cam Bolts (A) and Wood
Dowels (C) into corresponding holes until
all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver ( not included)
Cover Cam Locks (B) with Adhesive Pads
(M).
Marcell Media Console
Assembly Instructions
M

Page |
5
Figure 3
Align Cam Bolts (A) by hand.
Insert Cam Locks (B) into corresponding
holes on Shelf Panel (6).
Screw Cam Bolts (A) into threaded holes
on Side Panels (2/3).
Attach Side Panel (2/3) to Shelf Panel (6)
by inserting Cam Bolts (A) and Wood
Dowels (C) into corresponding holes until
all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver (not included).
Figure 4
Align Cam Bolts (A) by hand.
Insert Cam Locks (B) into corresponding
holes on Middle Panel (7) & Side Panels
(2/3).
Screw Cam Bolts (A) into threaded holes
on Bottom Panel (8).
Attach Bottom Panel (8) to Middle Panel
(7) & Side Panels (2/3) by inserting Cam
Bolts (A) and Wood Dowels (C) into
corresponding holes until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver (not included).
Cover Cam Locks (B) with Adhesive Pads
(M).
6

Page |
6
Figure 5
Align Cam Bolts (A) by hand.
Insert Cam Locks (B) into corresponding
holes on Side Panels (2/3).
Screw Cam Bolts (A) into threaded holes
on Top Panel (1).
Attach Top Panel (1) to Side Panels (2/3)
by inserting Cam Bolts (A) and Wood
Dowels (C) into corresponding holes until
all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver (not included).
Cover Cam Locks (B) with Adhesive Pads
(M).
Figure 6
Attach Back Panels (9) to back of the unit
with Screws (D).
Tighten Screws (D) with Phillips
screwdriver (not included) .

Page |
7
Figure 7
Align Screws (K) by hand.
Attach Hinges (J), to Side panels (2/3) and
Doors (10/11) with Screws (K).
Tighten Screws (K) with Phillips
screwdriver (not included).
Attach Magnet Plates (H) to Doors (10/11)
with Screws (I).
Tighten Screws (I) with Phillips screwdriver
(not included).
Attach Knobs (F) to Doors (10/11) with
Bolts (G).
Tighten Bolts (G) with Phillips screwdriver
(not included).
Attach Magnets (E) to the assembled unit
using Screws (D).
Tighten Screws (D) with Phillips
screwdriver (not included).
Insert Shelf Pins (L) into holes on side
panels (2/3).

Page |
8
Figure 8
Insert Adjustable Shelf Panels (12) in the
direction the arrows indicate.
Ensure the Shelf Pins (L) are securely
holding the Adjustable Shelf Panels (12).
Figure 9
Now your Marcell Media Console is ready
to use!

Page |
9
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas),
Mon-Fri 9am – 4pm CST, or email us at [e-mail]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Parts Replacement Form
Customer Service: 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019

Page |
10
CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 46” and
supports up to 85 lb.
The top shelf is NOT INT ND D for tube televisions.
ach VCR shelf should not be loaded with more than 20 lb
ach interior shelf should not be loaded with more than 15 lb.
DO NOT XC D R COMM ND D LOAD. Use with products heavier than the maximum sizes
and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on under side of top shelf or inside
drawer.
Do not allow children under 16 years to move the media stand.
Model: MS040100TX
Marcell Media Console
Southern nterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 01/16/2016