Southern Enterprises HZ10300TX User manual

Page |
1
HZ10300TX
Britton Console Bar
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seidal.com

Page |
2
Britton Console Bar
Parts List
Please check packaging for all parts and hardware before discarding. Before beginning assembly, separate each
type of hardware. Carefully study the diagrams below and check that you have all parts indicated.
Call Customer Service if missing hardware. Using the incorrect hardware will cause damage.
A. Quantity
of 20
Cam Bolts
B . Quantity
of 20
Cam Locks
C. Quantity
of 24
Wood Dowels (￠8x30)
D . Quantity
of 4
Wood Dowels (￠8x20)
E. Quantity
of 32
Bolts (￠1/4x1”)
F. Quantity
of 4
Bolts (￠1/4x1-3/8”)
G. Quantity
of 4
Bolts (￠1/4x2”)
H. Quantity
of 40
Spring Washers (￠1/4")
I. Quantity
of 40
Flat Washers (￠1/4”/13mm)
J. Quantity
of 1
Allen Wrench (4mm)
K. Quantity
of 6
Screws (￠8x1”)
L. Quantity
of 2
Plastic Anchors
M. Quantity
of 2
Screws (￠3.5x19mm)
N. Quantity
of 2
Screws (￠3.5x25mm)
O. Quantity
of 2
Plastic Straps
P. Quantity
of 4
Brackets

Page |
3
Q. Quantity
of 24
Covers
1. Quantity
of 1
Top Panel
2. Quantity
of 1
Upper Shelf Panel
3. Quantity
of 2
Side Boxes
4. Quantity
of 2
Inner Side Panels
5. Quantity
of 1
Left Front Leg
6. Quantity
of 1
Right Front Leg
7. Quantity
of 1
Left Back Leg
8. Quantity
of 1
Right Back Leg
9. Quantity
of 1
Upper Bar Holder Panel
10. Quantity
of 1
Bottom Bar Holder Panel
11. Quantity
of 2
Shelf Panels
12. Quantity
of 2
Upper Across Bars
13. Quantity
of 2
Lower Across Bars
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish.Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please call
Customer Service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
Tool List: 3/16" Drill Bit, Drill, Tape Measure and Pencil

Page |
4
Britton Console Bar
Assembly Instructions
Figure 1
Insert Wood Dowel (C) into holes on
Shelf Panels (11).
Attach Inner Side Panels (4) to Shelf
Panels (11) with Bolts (E), Flat
Washers (I), and Spring Washers (H).
Tighten Bolts with Allen Wrench (J).
Figure 2
Insert Wood Dowels (C) into holes on
top of Inner Side Panels (4).
Attach Upper Shelf Panel (2) on top of
unit with Wood Dowels (C).
4
4
C
C
C
C
11
11
2
4
4
C
C

Page |
5
Figure 3
Secure Upper Shelf Panel (2) to Inner
Side Panels (4) using Bolts (F), Flat
Washers (I), and Spring Washers (H).
Tighten bolts with Allen Wrench (J).
Figure 4
Turn assembled unit upside-down.
Attach Lower Bar Holder Panel (10) to
Upper Shelf Panel (2) with Wood
Dowels (C).
Secure Panel (10) with Screws (K).
Tighten with Phillips screwdriver.
Note: Although not shown on the
illustration, the back side also
needs Wood Dowels and Screws to
secure Panel (C).
C
C
2
JFHI
2
4
4

Page |
6
Figure 5
Insert Cam Locks (B) into Upper and
Lower Across Bars (12/13).
Screw Cam Bolts (A) into holes on Left
Front Leg (5).
Attach Upper Across Bar (12) and
Lower Across Bar (13) to Left Front
Leg (5) using Wood Dowels (C) and
Cam Bolts (A).
Tighten by rotating Cam Locks (B)
clockwise with Phillips screwdriver.
Cover cam lock holes with Covers (Q).
Attach Side Box (3) to Left Front Leg
(5) with Bolts (E), Flat Washers (I),
Spring Washers (H) and Wood Dowels
(D).
Repeat process with Left Back Leg (7).
Tighten bolts with Allen Wrench (J).
Repeat steps to assemble side box.
Figure 6
Attach unit from Figure 4 to
assembled units from Figure 5 with
Bolts (E), Flat Washers (I), Spring
Washers (H) and Wood Dowels (C).
Tighten bolts with Allen Wrench (J).
Cover bolt holes with Covers (Q).
C
A
C
A
A
B
BA
D
5
7
13
BQ
C
C
4
4
5
6
J
HI
C
8
Q
6
3

Page |
7
Figure 7
Attach Upper Bar Holder (9) to Top
Panel (1) with Bolts (E), Flat Washers
(I), and Spring Washers (H).
Tighten all bolts byAllen Wrench (J).
Figure 8
Insert Cam Locks (B) into holes on
assembled unit from Figure 6.
Screw Cam Bolts (A) into holes on Top
Panel (1).
Attach Top Panel (1) to assembled unit
by inserting Cam Bolts (A) into
corresponding holes.
Tighten by rotating Cam Locks (B)
clockwise with Phillips screwdriver.
Cover cam lock holes with Covers
(Q).
Secure Top Panel (1) with Bolts (G),
Flat Washers (I), and Spring Washers
(H).
Tighten bolts with Allen Wrench (J).
A
AA
1
12
B
1
9
J
E
H
I
E
H
IE
H
I

Page |
8
Figure 9
Attach Brackets (P) to back using
Screws (M). Tighten with Phillips
screwdriver.
Mark two desired locations on wall,
same distance as Brackets (P)
attached to back.
Drill two 3/16" holes on wall and insert
Plastic Anchors (L) into holes on wall
(use hammer to help).
Attach Brackets (P) to wall using
Screws (N). Tighten with Phillips
screwdriver.
Figure 10
Move unit close to wall and tie
Brackets (P) on wall to Brackets (P) on
unit with Plastic Straps (O).
Anti-tipping hardware must be
used for this product to avoid
tipping and injury.
Now your Britton Console Bar is
ready to use!
IPN
IN
P
FURNITURE
wall wall
FURNITURE
P
P
P
P

Page |
9
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and
we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported
within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas),
Mon-Fri 9am – 4pm CST, or email us at [e-mail]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No. Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service: 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019