Southern Enterprises BC273100T User manual

BC273100TX
ACTON BENCH
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-096
[email protected]
www.seifurniturestore.com
PO#13 1

BC
273100TX
ACTON BENCH
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer Service if
missing any hardware. Using a screw that is too long will cause damage. Before beginning assembly,
separate each type of screw. Carefully study the screw diagrams below. You may receive extra
hardware with your unit.
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with
rough or abrasive objects.
For replacement parts or questions, please call
SEI Customer Service at 1-800-633-5096.
Do not return product to store. Please call SEI for
assistance, questions or parts.
Assembly Tool Required:
No.2 Phillips Screwdriver (not
included)
A
1pc
Seat Frame
Short Stretcher
D
2pcs
B
2pcs
Leg
C
2pcs
Leg
E
1pc
Long Stretcher
Bolt 1/4” x 2-15/16”
1 8pcs
Washer Ø5/8”
2 8pcs
Spring Washer Ø7/16”
3 8pcs
Flat Screw Ø5/32” x 1-9/16”
4 6pcs
Dowel Ø5/16” x 1-3/16”
5 6pcs
Allen Wrench 5/32”x2-3/8”
6 1pc

BC273100TX
ACTON BENCH
Assembly Instructions
Step 1
:
Note: Place all parts on a
soft surface to prevent
scratches.
Attach Legs (B/C) to Seat
Frame (A) with Bolts (1),
Washers (2), and Spring
Washers (3).
Partially tighten with Allen
Wrench (6).
Step 2:
Attach Short Stretchers
(D) to assembled unit
from Step 1 with Dowels
(5).
B
B
C
C

Step 3:
Attach Long Stretcher (E)
to assembled unit from
Step 2 with Dowels (5).
Step 4:
Use Allen Wrench (6) to
fully tighten all Bolts (1).
Use screwdriver (not
included) to fully tighten all
Screws (4).

Now your Acton Bench
assembly is complete!