Southern Enterprises Kinsley BT7860A0TX User manual

Page |
1
BT7860A0TX/BT7860B0TX
Kinsley Corner Vanity Sink
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seifurniturestore.com

Page |
2
A) Quantity
of 1
Top Panel
B) Quantity
of 1
Right Side Panel
C) Quantity
of 1
Left Panel
D) Quantity
of 1
Front Upper Bar
E) Quantity
of 1
Fixed Shelf Panel
F) Quantity
of 1
Back Leg
G) Quantity
of 2
Back Upper Bar
H) Quantity
of 2
Back Bottom Bar
I) Quantity
of 1
Front Bottom Bar
J) Quantity
of 5
Metal Leg
K) Quantity
of 1
Metal Upper Frame
L) Quantity
of 1
Metal Bottom Frame
M) Quantity
of 1
Door
Kinsley Corner Vanity Sink
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.

Page |
3
1) Quantity
of 16
Large Bolts. Dia:1/4”*1-3/8”L
2) Quantity
of 16
Spring Washer
3) Quantity
of 16
Flat Washer
4) Quantity
of 1
Allen Wrench
5) Quantity
of 24
Wood Dowel
6) Quantity
of 2
Knob
7) Quantity
of 4
Small Bolts
Dia.5/32”*3/4”L
8) Quantity
of 2
Hinge
9) Quantity
of 12
Screw (Ø3.5*16mm)
10) Quantity
of 16
Medium Bolts. Dia:1/4”*5/8”L
11) Quantity
of 16
Spring Washer
12) Quantity
of 16
Flat Washer
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish. Avoid rubbing
or scratching the surface with rough or abrasive objects.
For replacement parts or
questions, please call SEI
Customer Service at
1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver
(Not Included)

Page |
4
Figure 1
Insert Wood Dowels (5) into
pre-drilled holes on Right Side
Panel (B).
Attach Front Upper Bar (D) and
Front Bottom Bar (I) to Right
Side Panel (B) with Large Bolts
(1) and Washers (2/3).
Tighten Large Bolts (1) with
Allen Wrench (4).
Figure 2
Insert Wood Dowels (5) into
pre-drilled holes on assembled
unit from Figure 1.
Attach assembled unit from
Figure 1 to Left Side Panel (C)
with Large Bolts (1) and
Washers (2/3).
Tighten Large Bolts (1) with
Allen Wrench (4).
Kinsley Corner Vanity Sink
Assembly Instructions

Page |
5
Figure 3
Attach Fixed Shelf Panel (E) to
assembled unit from Figure 2
with Large Bolts (1) and
Washers (2/3).
Tighten Large Bolts (1) with
Allen Wrench (4).
Figure 4
Insert Wood Dowels (5) into
pre-drilled holes on Back Bars
(G/H).
Attach Back Bars (G/H) to
Back Leg (F) with Large Bolts
(1) and Washers (2/3).
Tighten Large Bolts (1) with
Allen Wrench (4).

Page |
6
Figure 5
Insert Wood Dowels (5) into
pre-drilled holes on Back Bars
(G/H).
Attach Back Bars (G/H) to
Back Leg (F) with Large Bolts
(1) and Washers (2/3).
Tighten Large Bolts (1) with
Allen Wrench (4).
Figure 6
Align assembled unit from
Figure 5 to assembled unit
from Figure 3 by inserting
Wood Dowels (5) into
pre-drilled holes.

Page |
7
Figure 7
Attach Fixed Shelf (E) to the
aligned unit from Figure 6 with
Large Bolts (1) and Washers
(2/3).
Tighten Large Bolts (1) with
Allen Wrench (4).
Figure 8
Attach Metal Legs (J) to Metal
Upper Frame (K) with Medium
Bolts (10).
Tighten Medium Bolts (10) with
Allen Wrench (4).

Page |
8
Figure 9
Align Metal Bottom Frame (L)
to assembled unit from Figure
8.
Figure 10
Attach Bottom Metal Frame (L)
to assembled unit from Figure
8 with Medium Bolts (10).
Tighten Medium Bolts (10) with
Allen Wrench (4).

Page |
9
Figure 11
Attach assembled unit from
Figure 10 to assembled unit
from Figure 7 with Medium
Bolts (10) and Washers
(11/12).
Tighten Medium Bolts with
Allen Wrench (4).
Figure 12
Attach Hinges (8) to Door (M)
with Screws (9).
Tighten screw with Phillips
screwdriver (not included).

Page |
10
Figure 13
Attach Door (M) to assembled
unit from Figure 11 with Screws
(9).
Attach Handle (6) to
assembled unit with Small
Bolts (7).
Tighten Screws (9) and Small
Bolts (7) with Phillips
screwdriver (not included).
Figure 14
Insert Marble Top (A) into
assembled unit from Figure 13.