Southern Enterprises BC946200TX User manual

For assistance with assembly, contact:
Southern Enterprises Inc.
customer service 1-800-633-5096
[email protected]om
www.seidal.com
BC946200TX
Large Artisan Storage Bench
Assembly Instructions
PO#:
Page1

Large Artisan Storage Bench
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated.Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
A.
Quantity
of 1
top panel
B.
Quantity
of 1
apron back panel
C.
Quantity
of 2
side panel
D.
Quantity
of 1
left side frame
E.
Quantity
of 1
right side frame
F.
Quantity
of 1
left vertical panel
G.
Quantity
of 1
right vertical panel
H.
Quantity
of 1
left shelf panel
I.
Quantity
of 1
right shelf panel
J.
Quantity
of 2
small upper vertical panel
K.
Quantity
of 2
small lower vertical panel
L.
Quantity
of 1
bottom panel
Page2

M.
Quantity
of 1
back rail
N.
Quantity
of 1
back panel
O.
Quantity
of 1
middle leg
P.
Quantity
of 1
drawer front panel
Q.
Quantity
of 1
drawer left side panel
R.
Quantity
of 1
drawer right side panel
S.
Quantity
of 1
drawer back panel
T.
Quantity
of 1
drawer bottom panel
U.
Quantity
of 1
seat cushion
1.
Quantity
of 36
short wood dowel
ø8 x 30mm
2.
Quantity
of 4
long wood dowel
ø8
x
40mm
3.
Quantity
of 30
cam bolt
4.
Quantity
of 30
cam lock
5.
Quantity
of 2
drawer bolt
6.
Quan
tity
of 14
round head screw
ø1/8” x 1/2”L
Page3

7.
Quantity
of 2
short bolt
ø1/4” x 7/8”L
8.
Quantity
of 5
long bolt
ø1/4” x 1-1/2”L
9.
Quantity
of 5
flat head screw
ø1/8”x1”l
10.
Quantity
of 1
handle
11.
Quantity
of 2
handle bolt
ø5/32” x 1/2”L
12.
Quantity
of 10
sticker cover
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish.Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)

Figure 1
ConnectApron back panel (B) to apron
side panels (C) with bolts (7) and wood
dowels (1).
Tighten bolt (7) with phillips screwdriver
as shown.
Figure 2
Connect assembled to top panel (A) with
bolts (8) and wood dowels (1).
Tighten bolts (8) with phillips
screwdriver.
Page5
Page 4
Large Artisan Storage Bench
Assembly Instructions

Figure 3
Insert cam locks (4) into holes on drawer
back panel (S).
Screw cam bolts (3) into drilled holes on
drawer left side panel (Q) and drawer
right side panel (R).
Attach drawer left side panel (Q) and
drawer right side panel (R) to drawer
back panel (S) by inserting cam bolts (3)
into corresponding holes until they meet.
Tighten by rotating cam locks (4)
clockwise with phillips screwdriver.
Figure 4
Slide drawer bottom panel (T) into the
grooves of right drawer side panel (R),
left drawer side panel (Q), and drawer
back panel(S).
Page6

Figure 5
Insert cam locks (4) into holes
on assembled unit.
Screw cam bolts (3) into holes on
drawer front panel (P). Attach
assembled unit to drawer front panel (P)
by inserting cam bolts (3) into
corresponding holes until they meet.
Tighten by rotating cam locks (4)
clockwise with phillips screwdriver.
Figure 6
Attach handle (10) to drawer front panel
as shown with bolts (11).
Tighten bolts (11) with phillips
screwdriver.
Cover cam lock holes with sticker covers
(12).
Page7

Figure 7
Insert cam locks (4) into holes on left
vertical panel (F) and right vertical panel
(G).
Screw cam bolts (3) into holes on
bottom panel (O).
Attach left vertical panel (F) and right
vertical panel (G) to bottom panel (O) by
inserting wood dowels (1) and cam bolts
(3) into corresponding holes until they
meet.
Tighten by rotating cam locks (4)
clockwise with phillips screwdriver.
Attach small lower vertical panels (K) to
bottom panel (O) by inserting wood
dowels (1) into corresponding holes
until they meet.
Figure 8
Attach left shelf panel (H) and right shelf
panel (I) to left vertical panel (F) and
right vertical panel (G) by inserting wood
dowels (1) into corresponding holes
until they meet.
Page8

Figure 9
Attach small upper vertical panels (J) to
assembled unit by inserting wood
dowels (2) into corresponding holes
until small upper vertical panels (J) and
assembled unit meet.
Figure 10
Insert cam locks (4) into holes on
assembled unit and back rail (M).
Screw cam bolts (3) into holes of left
side frame (D) and right side frame (E).
Attach left side frame (D) and right side
frame (E) to assembled unit and back
rail (M) by inserting cam bolts (3) into
corresponding holes until they meet.
Tighten by rotating cam locks (4)
clockwise with phillips screwdriver.
Page9

Figure 11
Attach middle leg (O) to bottom panel as
shown, tighten by hand.
Figure 12
Insert cam locks (4) into holes
on assembled unit.
Screw cam bolts (3) into holes on
underside of top panel (A).Attach top
panel to assembled unit by inserting
wood dowels (1) and cam bolts (3) into
corresponding holes until top panel and
assembled unit meet.
Tighten by rotating cam locks (4)
clockwise with phillips screwdriver.
Page10

Figure 13
Use screws (9) to connect back rail to
top panel as shown.
Tighten screws (9) with phillips
screwdriver.
Figure 14
Connect back panel (N) to assembled
unit with screws (6).
Tighten screws (6) with phillips
screwdriver.
Page11

Figure 15
Screw bolts (5) into holes on vertical
panel as shown.
Attach assembled drawer box into
assembled unit as shown.
Make sure the bolt (5) holds the drawer
box stably.
Figure 16
Place seat cushion (L) on top panel as
shown.
Page12

Figure 17
Now your new large Artisan storage
bench is ready to use.
Page13

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at serv[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 4