Southern Enterprises HZ348600TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seidal.com
PO: 13010
HZ348600TX
4PC SHELF SET
- ORANGE
Assembly Instructions
Supports up to 2 lb. / shelf

1
1 1PC
large shelf
2 1PC
medium shelf
3 2PCS
small shelf
A 8PCS
plastic wall anchor
B 8PCS
phillips head screw: dia 4mm × 40mm
Tool List: 3/16" drill bit, drill, tape measure and pencil .
Assembly Tool Required
No.2 Phillips Screwdriver
HZ348600TX
4PC SHELF SET – ORANGE
Parts List
P Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware
according to the pictures. Using the incorrect hardware will cause damage.
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with
rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.

Figure 1 – Screw Hole Location
Tip: Make sure that at least one screw for
each shelf is directly mounted into a wall
stud. Wall anchor is not needed when
mounting into a wall stud.
Find an ideal location on the wall and mark
the location of the center of each mounting
hole.
Shelves can be mounted vertically or
horizontally.
Using the level, make sure that all marks
are level on the wall.
Using the power drill and a 3/16″drill bit,
drill two 3/16″holes through the wall at the
mounting hole marks.
Tip: Make sure not to drill into electrical
wiring or plumbing pipes.
HZ348600TX
4PC SHELF SET – ORANGE
Assembly Instructions
OR
1
29.3cm
2
19.3cm
OR
3
24.3cm

Figure 2 – Wall Anchor Installation
Insert plastic anchors (A) into the two
3/16″holes. Make sure that the wall
anchors are flush with the wall.
Tip: It may be necessary to use a hammer
to gently tap the anchors into place.
Using the phillips screwdriver, install
phillips head screw (B) into wall anchors
(A). Turn the screw until there is a gap of
1/4″between the head of screw and the
wall surface.
Figure 3 – Install Wall Unit
Install the circle (1), (2), and (3) onto the
mounting screws using the mounting holes
located at the back of the unit. Properly
secure unit with mounting holes resting
securely on the mounting screw.
Tip: Use the level to check and make sure
that the wall unit is horizontally and
vertically level.
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
2
3
1
1/4" Gap
(B) Phillips head
3/16
”
Hole
(A) Wall anchor

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If damages
or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or
replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalo
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019