Southern Enterprises Lahti User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800- 33-509
[e-mail]
www.seidal.com
WS035300TX
Lahti Decorative Mirror
Assembly Instructions
PO#:13497
Page 1

Lahti Decorative Mirror
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer
service if hardware is missing. Before beginning assembly, carefully study the diagrams below and
sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
1
Quantit
y
Of 1
Lahti Decorative Mirror
A
Quantity
of 4
Plastic Anchor
B
.
Quantity
of 4
Screw Dia 1/8”x1-1/2”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish.Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Tool List: 3/16" Drill Bit, Drill, Tape Measure and Pencil.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)
Page 2

Note: Drilled hole or plastic anchor not required when
mounting to stud, use screw only. We do not supply hardware
for mounting on concrete walls.
Figure 1
Find a desired location and mark 2
locations for screws on wall
One screw (for each unit) must be
attached directly into a wall stud. Wall
anchor is not needed when mounting to
wall stud.
Drill one of the marked 3/16" hole (for
each unit).
Insert plastic anchor (A) into the hole on
wall as shown (You will need a
hammer help you).
Using the Phillips screwdriver, install
Screws (B) into the anchor (A) and the
remaining marked hole. Turn the Screws
(B) until there is a gap of approximately
3mm between the head of the screw
and the wall as shown.
Figure 2
Hang the Lahti decorative mirror
onto the Screws (B) and verify the mirror
is resting securely on the mounting
Screw (B).
Now your Lahti decorative mirror is
ready to use.
Page3
Lahti Decorative Mirror
Assembly Instructions
"The hole measurements on
the wall must match with the
hole measurements on back
of the unit"

If you prefer to hang this product in Vertical configuration, please follow instructions below.
Note: Drilled hole or plastic anchor not required when
mounting to stud, use screw only. We do not supply hardware
for mounting on concrete walls.
Figure 3
Find a desired location and mark 2
locations for screws on wall
One screw (for each unit) must be
attached directly into a wall stud. Wall
anchor is not needed when mounting to
wall stud.
Drill one of the marked 3/16" hole (for
each unit).
Insert plastic anchor (A) into the hole on
wall as shown (You will need a
hammer help you).
Using the Phillips screwdriver, install
Screws (B) into the anchor (A) and the
remaining marked hole. Turn the Screws
(B) until there is a gap of approximately
3mm between the head of the screw
and the wall as shown.
Figure 4
Hang the Lahti decorative mirror
onto the Screws (B) and verify the mirror
is resting securely on the mounting
Screw (B).
Now your Lahti decorative mirror is
ready to use.
Page 4
"The hole measurements on
the wall must match with the
hole measurements on back
of the unit"

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 5