Southern Enterprises MARIANNA MEDIA FA937500TX User manual

FA937500TX
MARIANNA MEDIA
FIREPLACE MANTEL
ASSEMBLY INSTRUCTION
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com
PLEASE KIINDLY NOTE THAT THE DRAWER FRONT PANEL & DOOR PANEL ALL HAVE TWO
COLORS WHICH YOU CAN CHOOSE THE COLOR YOU LIKE ON OUTLOOK WHEN YOU ASSEMBLE.

MARIANNA MEDIA FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below. You may receive extra hardware with your unit.
A Quantity
of 46
CAM BOLT
B Quantity
of 6
WOOD DOWEL
C Quantity
of 46
CAM LOCK
D Quantity
of 8
SMALL CAM BOLT
E Quantity
of 8
SMALL CAM LOCK
F Quantity
of 4
HANDLE
G Quantity
of 4
HINGE
H Quantity
of 2
MAGNET CATCH
I Quantity
of 2
MAGNET PLATE
J Quantity
of 8
SHELF PIN
K Quantity
of 2
BOLT(5/ 2”* /4”)
L Quantity
of 2
BOLT(5/ 2”*1-1/8”)
M Quantity
of 10
SCREW(8*25MM)
N Quantity
of 28
SCREW( *14MM)
O Quantity
of 42
SCREW( *14MM)
P Quantity
of 2
DRAWER STOPPER
Q Quantity
of 1
FIREBOX(IN SEPARATE CARTON)

(1 Quantity
of 1
TOP PANEL
(2 Quantity
of 1
SHELF PANEL
(3 Quantity
of 1
LEFT SIDE PANEL
(4 Quantity
of 1
RIGHT SIDE PANEL
(5 Quantity
of 1
LEFT FRONT PILASTER
(6 Quantity
of 1
RIGHT FRONT PILASTER
(7 Quantity
of 1
LEFT UPPER MIDDLE PANEL
(8 Quantity
of 1
RIGHT UPPER MIDDLE PANEL
(9 Quantity
of 1
LEFT LOWER MIDDLE PANEL
(10 Quantity
of 1
RIGHT LOWER MIDDLE PANEL
(11 Quantity
of 1
LEFT CONNECT PANEL
(12 Quantity
of 1
RIGHT CONNECT PANEL
(13 Quantity
of 1
BASE
(14 Quantity
of 1
LEFT ADJUSTABLE SHELF PANEL

(15 Quantity
of 1
RIGHT ADJUSTABLE SHELF PANEL
(16 Quantity
of 1
LEFT DOOR
(17 Quantity
of 1
RIGHT DOOR
(18 Quantity
of 2
DRAWER FRONT
(19 Quantity
of 2
DRAWER LEFT SIDE PANEL
(20 Quantity
of 2
DRAWER RIGHT SIDE PANEL
(21 Quantity
of 2
DRAWER BOTTOM PANEL
(22 Quantity
of 2
DRAWER BACK PANEL
(23 Quantity
of 1
UPPER BACK PANEL
(24 Quantity
of 2
LOWER BACK PANEL
(25 Quantity
of 1
WOOD HOLDER
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included

MARIANNA MEDIA
FIREPLACE
Assembly Instructions
Figure 1
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front page
Insert cam locks (C) into predrilled
holes on left lower middle panel (9) &
right lower middle panel (10).
Screw cam bolt (A) into predrilled
holes on shelf panel (2).
Attach left lower middle panel (9) &
right lower middle panel (10) to shelf
panel (2) by inserting wood dowel (B)
& cam bolt (A) into corresponding
predrilled holes until left lower middle
panel (9) & right lower middle panel
(10) & shelf panel (2) meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Figure 2
Insert cam locks (C) into predrilled
holes on left upper middle panel (7) &
left connect panel (11).
Screw cam bolt (A) into predrilled
holes on shelf panel (2) .
Attach left upper middle panel (7) &
left connect panel (11) to shelf panel
(2) by inserting wood dowel (B) &
cam bolt (A) into corresponding
predrilled holes until left upper middle
panel (7) & left connect panel (11) &
shelf panel (2) meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Repeat with right upper middle panel
(8) & right connect panel (12) as
shown.
2
9
10
A
A

MARIANNA MEDIA FIREPLACE
Assembly Instructions
Figure 3
Insert cam locks (C) into predrilled
holes on left side panel (3).
Screw cam bolt (A) into predrilled
holes on left front pilaster (5).
Attach left front pilaster (5) to left side
panel (3) by inserting wood dowel (B)
& cam bolt (A) into corresponding
predrilled holes until left side panel
(3) & left front pilaster (5) meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Repeat with right side panel (4) &
right front pilaster (6) as shown.
Figure 4
Insert cam locks (C) into predrilled
holes on the pre-assemble parts in
figure 2 .
Screw cam bolt (A) into predrilled
holes on left side panel (3) & right
side panel (4) .
Attach left side panel (3) & right side
panel (4) to pre-assemble parts in
figure 2 by inserting wood dowel (B)
& cam bolt (A) into corresponding
predrilled holes until assemble parts
in figure 2 & left side panel (3) & right
side panel (4) meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
3
4
C
C
3
4
5
6
AB
AB
A

MARIANNA MEDIA FIREPLACE
Assembly Instructions
Figure 5
Insert cam locks (C) into predrilled
holes on pre-assembled unit in
figure 4.
Screw cam bolt (A) into predrilled
holes on top panel (1).
Attach top panel (1) to pre-assemble
parts in figure 4 by inserting wood
dowel (B) & cam bolt (A) into
corresponding predrilled holes until
assemble parts in figure 4 & top
panel (1) meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Repeat the same way to attach base
(13) on the unit as shown.
Figure 6
insert the drawer bottom pane (21)
into the corresponding groove of
drawer back panel (22),
Attach the drawer left side panel (19)
& drawer right side panel (20) with
the back panel and bottom panel
together by groove well match, as
well tight them by screw (M).
at last, use small cam bolts (D) &
small cam lock (E) to attach the
drawer front panel (18) to the drawer
side panels,
And attach the drawer handle (F) on
the drawer front by bolt (K) as shown.
1
13
A
C
A
C
19
20
21 22
M
M
M
M

MARIANNA MEDIA FIREPLACE
Assembly Instructions
Figure 7
Assemble the drawer stopper (P) on
the pre-drilled hole on the shelf panel
and well insert the two drawers into
the pre-assembled unit as shown.
then assemble the magnet catch
(H) under the shelf panel by
screw (O),
Insert the shelf pins (J) into the pr
e-drilled holes on the side panels
and middle panels, as well put the
shelf panels (14) & (15) on it.
Figure 8
Well put the two drawers into the
cabinet as shown.

MARIANNA MEDIA FIREPLACE
Assembly Instructions
Figure 9
Assemble the right door panel (17)
on the pre-assembled unit by hinge
(G) and screw (N).
Attach the metal plate (I) on the up
inside of door panel by screw (N) to
let it can match the position of the
magnet catch.
At last, attach the door decoration
plate (F) and handle (F) on the door
panel by bolt (L) as shown.
Repeat the same way to assemble
the left door panel (16) on the unit.
Figure 10
Attach the upper back panel (23) and
lower back panels (24) on the
pre-assembled unit by screw (O) and
tightening with Phillips screwdriver
(not included) as shown.
23
24
O
16
17
( 1) ( 2)

MARIANNA MEDIA FIREPLACE
Assembly Instructions
Figure 11
Well put the fireplace (Q) into the
cabinet and avoid any scratch.
Assemble the wood holder (25) on
the base by screw (M) and tightening
with Phillips screwdriver (not
included) as shown.
.
Figure 12
Now you can enjoy your new
fireplace.
Q
25
M