Southern Enterprises MS986400TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[email protected]
www.seidal.com
“Dynasty” TV/Media Stand
MS986400TX- Antique White Finishing
MS986500TX- Espresso Finishing
Assembly Instructions
PO#:12778

A
“Dynasty” TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit
B C
Quantity
of 1
Quantity
of 1
Quantity
of 1
Top Panel
Left Middle Panel
Left Door
Right Door
Right Middle Door
Side Shelf
Right Middle Panel
Left Middle Door
D
E
F
Quantity
of 1
Quantity
of 1
Quantity
of 1
G H I
Quantity
of 1
Quantity
of 4
Quantity
of 1
J
K
L
Quantity
of 1
Quantity
of 1
Quantity
of 1
M
N
Quantity
of 1
Quantity
of 2
Left Side Panel Right Side Panel
Bottom Panel
Apron Frame
Leg
Back Panel
Middle Shelf
O
Quantity
of 1

“Dynasty” TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit
Assembly Tool Required
No. 2 Phillips Screwdriver
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 16
1/4” x 1” Bolt
(2)
Quantity
of 1
Metal Pin
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-6 -5096.
Please call manufacturer for assistance,
questions or parts.
Quantity
of 8
Metal H
andle
Quantity
of 24
.5mm x 12 mm
Screw For Door
5/ 2” x 12mm
Bolt For Handle
Flat Washer
Quantity
of 12
Single Magnet
.5mm x 12 mm
Screw For Back
1/4” x 1-1/2” Allen Bolt Allen Wrench
( )
(4)
(5)
(6)
(7) (8) (9)
(10)
(11)
(12)
(1 )
Quantity
of 24
Quantity
of 10
Quantity
of 1
Quantity
of 1
Quantity
of 2
Quantity
of 2
Quantity
of 16
Quantity
of 4
.5mm x 15 mm
Screw For Magnet
Double Magnet
P
Quantity
of 1
Middle leg

“Dynasty” TV/Media Stand
Assembly Instructions
Assembly Instructions:
Wood may scratch easily. Be careful
when assembling. Do not scratch.
Step 1. Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check that
you have all parts indicated
on the front page.
Step 2. Put the Top Panel (A) on the
soft working surface.
Step . Attach the Single Magnet( )
and Double Magnet(4) to the
Top Panel(A) with Screw For
Magnet(5), then fasten them.
Figure 2
Figure 1
(5)
(4)
Double Magnet
.5mm x 15mm
Screw For Magnet
Quantity
of 10
Quantity
of 1
(1)
(2)
1/4”
x 1” Bolt
8mm x 0 mm
Wood Dowel
Quantity
of 6
Quantity
of 6
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Top Panel(A).
Step 2. Attach Middle Panels(B,C) and
Right side Panel(E) to the
Top Panel(A) with Bolt(2)and
flat Washer（6）, then fasten
them.
( )
Single Magnet
Quantity
of 2
(
6
)
Washer
Quantity
of 6

“Dynasty” TV/Media Stand
Assembly Instructions
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Bottom
Panel(F) and Middle Panels(B,C)
as pictured.
Step 2. Attach the Bottom Panel(F) to
the Right Side Panel(E) and
Middle Panels(B,C).
Figure
Figure 5
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Bottom
Panel(F).
Step 2. Attach Left Side Panels(D) to
the Top Panel(A) and Bottom
Panel (F) with Bolt(2) and flat
Washer
（
6
）
,
then
fasten them.
(1)
(2)
1/4” x 1” Bolt
8mm x 0 mm
Wood Dowel
Quantity
of 2
Quantity
of 10
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 6
(2)
1/4” x 1” Bolt
Quantity
of 8
Step 1. Attach Apron Frame (G) as
Picture with Bolt(2) and Washer
（6）, then fasten them.
Figure 4
Washer
Quantity
of 8
(
6
)
(
6
)
Washer
Quantity
of 10

“Dynasty” TV/Media Stand
Assembly Instructions
Step 1. Put the
flat
Washer(6) into Allen
Bolt (7), attach the Legs(H) into
corner block with Allen Bolt (7)
by Allen Wrench(8), Then fasten
them.
Step2. Attach the Middle leg (P) to
bottom panel (F) as shown
Figure 6
Figure 8
Step 1. Attach Left Door(J) to Left
Middle Panel(B) with Screw For
Door(10), then fasten them.
Step 2. Attach Right Door(K) to Right
Middle Panel(C) with Screw For
Door(10), then fasten them.
(10)
.5mm x 12mm
Screw For Door
Quantity
of 12
Figure 7
(9)
.5mm x 12mm
Screw For Back
Quantity
of 16
Step 1. Attach the Back Panel(I) as
pictured with Screw For Back(9),
then fasten them.
(6)
Washer
Quantity
of 8
(7)
1/4” x 1
-
1/2” Allen Bolt
Quantity
of 8
(8)
Allen Wrench
Quantity
of 1
F
P

Figure 10
Figure 9
“Dynasty” TV/Media Stand
Assembly Instructions
Step 1. Attach Left Middle Door
(L) to
Left Middle Panel(B) with Screw
(10) for Door, then fasten them.
Step 2. Attach Right Middle Door (M) to
Right Middle Panel(C) with Screw
(10) for Door, then fasten them.
Step . Attach Handle (11) to Doors(L,M)
with Bolt For Handle(12).
(1 )
Metal Pin
Quantity
of 12
Step 1. Insert Metal Pins(1 ) to Side
Panels (D,E) and Middle
Panels(B,C).
Step 2. Put the Shelves (N,O) above
the Metal Pins(1 ).
Now your Media Stand is ready to use
(10)
.5mm x 12mm
Screw For Door
Quantity
of 12
(12)
5/ 2” x 12mm
Bolt For Handle
Quantity
of 4
(11)
Metal Handle
Quantity
of 1

Style No
Parts Letter
Parts Description
Quantity Needed
Parts Replacement
Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No
Parts Letter
Parts Description
Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame. Parts will not be available for items arriving fully assembled. We do not
recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-6 -5096 or in Dallas 972-869-0111/ 9am 4pm Mon-Fri
Central time if you have product issues or email us at [e-mail]. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Service 1-800-633-
5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite
200
Coppell, Texas 75019

CAUTION
The top shelf is intended for a flat screen television with a maximum overall width
of 46” and supports up to 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each shelf should not be loaded with more than 20 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible
injury.
This unit contains a permanent warning sticker located on under side of top shelf
or inside drawer.
Do not allow children under 16 years to move the cart.
Model: MS986500TX/6400TX
“Dynasty” TV/Media Stand
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 01/21/2011