Southern Enterprises BE6622 User manual

SOUTHERN ENTERPRISES INC.
RELAX...If you can follow a few easy, step-by tep directions-s
in order .YOU CAN ASSEMBLE THIS ITEM.
STYLE NO. BE6622
WHITE ARCH-TOP
WALL CABINET
PLEASE FIND HARDWARE IN RED POLYBAG BEFORE DISCARDING PACKING MATERIAL.
HARDWARE LIST
(1) LARGE MACHINE SCREWS
(Ø1/4”X3/4”)
6PCS
(8) LARGE FLAT HEAD WOOD SCREWS
(Ø4X38mm)
2PCS
(2) WOOD DOWELS
16PCS
(9) PLASTIC PLUGS 6PCS
(3) PAN HEAD WOOD SCREWS
(Ø2.6X10mm)
14PCS
(10) METAL HINGES
2PCS
(4) SHELF SUPPORTS 4PCS
(11) SMALL FLAT HEAD SCREWS (Ø3X10mm)
4PCS
(5) METAL KNOBS
2PCS
(12) RIGHT METAL HINGES
1PC
(6) SMALL MACHINE SCREWS
(Ø5/32”X5/8”)
2PCS
(13) LEFT METAL HINGES
1PC
(7) PLASTIC ANCHORS
2PCS
PARTS LIST
(A) TOP PANEL
1PC (G) RIGHT DOOR 1PC

(B) LEFT SIDE PANEL
1PC (H) WOOD TOWEL BAR 1PC
(C) RIGHT SIDE PANEL 1PC (I) BACK PANEL 1PC
(D) UPPER FIXED SHELF 1PC (J) LOWER FIXED SHELF 1PC
(E) ADJUSTABLE SHELF
1PC (K) LEFT DOOR 1PC
(F) DIVIDER
2PCS
ASSEMBLY INSTRUCTIONS
1. SELECT A SMOOTH, SOFT SURFACE TO PREVENT SCRATCHING FINISH.
2. YOU MAY NEED A PHILLIPS SCREWDRIVER.
3. INSERT WOOD DOWELS (2) INTO PREDRILLED HOLES ON EDGES OF DIVIDERS (F) AND FIT INTO
CORRESPONDING HOLES ON UNDERSIDE OF UPPER FIXED SHELF (D) AND UPSIDE OF LOWER
FIXED SHELF (J). (AS SHOWN IN FIGURE 1)
4. INSERT WOOD DOWELS (2) INTO PREDRILLED HOLES ON ENDS OF UPPER AND LOWER FIXED
SHELVES (D, J) AND FIT INTO CORRESPONDING HOLES ON INSIDE OF LEFT SIDE PANEL (B). INSERT
LARGE MACHINE SCREWS (Ø1/4”X3/4”) (1) THROUGH PREDRILLED HOLES ON OUTSIDE OF LEFT
SIDE PANEL (B) AND TIGHTEN INTO CORRESPONDING HOLES ON ENDS OF TOP PANEL (A) AND
WOOD TOWEL BAR (H). PUSH PLASTIC PLUGS (9) INTO THE BIG HOLES ON OUTSIDE OF LEFT SIDE
PANEL (B). ASSEMBLE RIGHT SIDE PANEL (C) IN SAME MANNER. (AS SHOWN IN FIGURE 2)

FIGURE 1
FIGURE 2

FIGURE 3
5. ATTACH BACK PANEL (I) INTO SLOTS ON PARTS (A, B, C, J). INSERT PAN HEAD WOOD SCREWS
(Ø2.6X10mm) (3) THROUGH PREDRILLED HOLES ON BACK PANEL (I) AND TIGHTEN INTO REAR
EDGES OF PARTS (A, B, C, J). INSERT METAL HINGES (10) INTO TOP EDGES OF LEFT AND RIGHT
DOORS (K, G) AND FIT INTO CORRESPONDING HOLES ON UNDERSIDE OF TOP PANEL (A). FIT LEFT
AND RIGHT METAL HINGES (12, 13) INTO PREDRILLED HOLES ON UPSIDE OF UPPER FIXED SHELF
(D). INSERT SMALL FLAT HEAD WOOD SCREWS (Ø3X10mm) (11) THROUGH LEFT AND RIGHT
METAL HINGES (12, 13) AND TIGHTEN INTO PREDRILLED HOLES ON LEFT AND RIGHT DOORS (K,
G). (AS SHOWN IN FIGURE 3)
6. INSERT SMALL MACHINE SCREWS (Ø5/32”X5/8”) (6) THROUGH PREDRILLED HOLES ON BACK OF
LEFT AND RIGHT DOORS (K, G) AND TIGHTEN INTO METAL KNOBS (5). FIT SHELF SUPPORTS (4)
INTO PREDRILLED HOLES ON INSIDE OF LEFT AND RIGHT SIDE PANELS (B, C). PUT ADJUSTABLE
SHELF (E) ON SHELF SUPPORTS (4). (AS SHOWN IN FIGURE 3)
7. DRILL TWO 1/4” DIAMETER HOLES IN WALL. THE DISTANCE BETWEEN TWO HOLES SHOULD
MATCH THE PREDRILLED HOLES ON BACK PANEL (I). FIT PLASTIC ANCHORS (7) INTO THE HOLES
ON WALL. USE SCREWDRIVER TO SCREW LARGE FLAT HEAD WOOD SCREWS (Ø4X38mm) (8)
THROUGH PREDRILLED HOLES ON BACK PANEL (I) INTO PLASTIC ANCHORS (7). (AS SHOWN IN
FIGURE 4)

FIGURE 4
YOUR NEW WHITE ARCH-TOP WALL CABINET IS FINISHED AND READY TO USE.
Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to divide
parts and label them to correspond with part list. Extra hardware may be included. If any items are missing,
please contact our parts/service department at [phone] or in Dallas [phone]/ 9am – 4pm
Mon-Fri Central time. Missing or damaged hardware and/ or parts will be replaced free of charge. WE DO
NOT SELL PARTS. WE DO NOT RECOMMEND MODIFYING PRODUCT(S) AND WE ARE NOT
RESPONSIBLE FOR ANY DAMAGES DUE TO PRODUCT MODIFICATION(S). If this product has not
been purchased from our retail affiliates (within 9 months), we are under no obligation to provide parts or
replacement merchandise. Parts will not be available for items arriving fully assembled.
PLEASE DO NOT OVERTIGHTEN CAMLOCKS!
PARTS REPLACEMENT FORM
STYLE NO:BE6622
Customer Name PARTS
LETTER
PART
DESCRIPTION
QUANTITY
NEEDED
Street, City, State, Zip
Phone#
Please indicate where you purchased this item.
Store/website/catalog
/ /
Please indicate color/size/style number
SOUTHERN ENTERPRISES INC.
P.O. Box 59996 Dallas, Texas 75229
/ /