Southern Enterprises WS591600TX User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800- 33-509
[e-mail]
www.seidal.com
WS591600TX
Florian Mirror
Assembly Instructions
PO#:

WS591 00TX Florian Mirror
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware.
Using a screw that is too long will cause damage. Before beginning assembly, separate
each type of screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.
1
Quantity
of 1
Mirror
A.
Quantity
of 4
Plastic Anchor
B
.
Quantity
of 4
Screw 7mmx1-1/2”L
C.
Quantity
of 1
Level
Care and Cleaning Instru tions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800- 33-509
Please call Manufacturer for assistance,
questions or Parts.
Tool List: 3/16" drill bit, drill, tape measure and pen il.
Assembly Tool Required No.2 Phillips
S rewdriver (Not In luded)
Page 2

NOTE: NO DRILLED HOLE OR PLASTIC ANCHOR REQUIRED
WHEN MOUNTING TO WOOD WALL.USE SCREW ONLY. WE DO
NOT SUPPLY HARDWARE FOR MOUNTING ON CONCRETE
WALLS.
Figure 1
Assembly Instructions:
Wood may scratch easily, Be
careful when assembling. Do not
scratch.
Find a desired location. Mark 2
locations for screws on wall
One screw (for each unit) must be
attached directly into a wall stud.
Wall anchor is not needed when
mounting to wall stud.
Drill one of the marking 3/16" hole
(for each unit).
Insert plastic anchors (B) into the
hole on wall as shown. (When
doing this, you will need a hammer
help you).
Using the Phillips head
screwdriver, install screw (A) into
the anchor (B). Turn the screw (A)
until there is a gap of approximately
3mm between the head of the
screw and the wall as shown.
Figure 2
Hang the Florian Mirror onto the
screw (B) and verify the Florian
Mirror is resting securely on the
mounting screw (B).
Place level (C) on Miiror to insure
product is level.
Now your Florian Mirror is ready to
use.
Page3
WS591 00TX Florian Mirror
Assembly Instructions
"the holes measurement on
wall must match with the
holes measurement on back
of the unit"

If you prefer to hang this product in horizontal configuration, please follow below instructions.
NOTE: NO DRILLED HOLE OR PLASTIC ANCHOR REQUIRED
WHEN MOUNTING TO WOOD WALL.USE SCREW ONLY. WE DO
NOT SUPPLY HARDWARE FOR MOUNTING ON CONCRETE
WALLS.
Figure 3
Find a desired location. Mark 2
locations for screws on wall
One screw (for each unit) must be
attached directly into a wall stud.
Wall anchor is not needed when
mounting to wall stud.
Drill one of the marking 3/16" hole
(for each unit).
Insert plastic anchors (B) into the
hole on wall as shown. (When
doing this, you will need a hammer
help you).
Using the Phillips head
screwdriver, install screw (A) into
the anchor (B). Turn the screw (A)
until there is a gap of approximately
3mm between the head of the
screw and the wall as shown.
Figure 4
Hang the Florian Mirror onto the
screw (B) and verify the Florian
Mirror is resting securely on the
mounting screw (B).
Place level (C) on top shelf to
insure product is level.
Now your Florian Mirror is ready to
use.
Page 4
"the holes measurement on
wall must match with the
holes measurement on back
of the unit"

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Repla ement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 5