Southern Enterprises BC348200TX User manual

Page 1
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seidal.com
BC348200TX
Collection Chest w/Tray Organizer
-Espresso
Assembly Instructions
PO#

Page 2
(1) Quantity
of 1
top panel
(2) Quantity
of 1
back panel
(3) Quantity
of 1
front panel
(4) Quantity
of 1
bottom panel
(5) Quantity
of 2
side panel（L/R）
(6) Quantity
of 1
cushion
(7) Quantity
of 1
tray
A Quantity
of 16
cam bolt
B Quantity
of 8
wood dowel
C Quantity
of 16
cam lock
D Quantity
of 16
cover
E Quantity
of 2
clip
F Quantity
of 2
clip plate
G Quantity
Of 1
spring hinge
H Quantity
Of 2
metal handle
I Quantity
Of 18
∮3 x 12mm
wood screw
J Quantity
Of 4
∮5/32" x 1/2"
bolt
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish .Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
Collection Chest w/Tray Organizer
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.

Page 3
Figure 1
Use wood screws (I) to connect clips (E) to
front panel (3). Tighten wood screws (I) with
phillips screwdriver.
Use wood screws (I) to connect clip plates
(F) to top panel (1). Tighten wood screws (I)
with phillips screwdriver.
Figure 2
Insert cam locks (C) into holes on side
panels (5) L/R.
Screw cam bolts (A) into holes on back
panel (2) and front panel (3). Attach front
panel (3) and back panel (2) to side panels
(5) L/R by inserting wood dowels (B) and
cam bolts (A) into corresponding holes
until all panels meet.
Tighten by rotating cam locks (C) clockwise
with phillips screwdriver.
Cover cam lock holes with covers (D).
Collection Chest w/Tray Organizer
Assembly Instructions
(2)
(1)
"Please do not over tighten cam bolts, stop when you
feel it tighten"
I
(3)
I
(1)
II
F
F
A
BA
C
D
A
A
A
B
C
CD
BD
C
A
(2)
(3)
(5)L
(5)R
A
BCD

Page 4
Figure 3
Insert cam locks (C) into holes on
assembled unit.
Screw cam bolts (A) into holes on bottom
panel (4).Attach assembled unit on to
bottom panel (4) by inserting wood dowels
(B) and cam bolts (A) into corresponding
holes until assembled unit and bottom panel
(4) meet.
Tighten by rotating cam locks (C) clockwise
with phillips screwdriver.
Cover cam lock holes with covers (D).
Figure 4
Use wood screws (I) and hinges to attach
top panel (1) to back panel (2). Tighten
wood screws (I) with philips screwdriver.
Use wood screws (I) through holes spring
hinge (G) to connect left side panel (5) and
top panel (1). Tighten wood screws (I) with
philips
screwdriver.
Use bolts (J) through holes of side panel (5)
L/R to connect metal handle (H).
Insert tray(7) into chest.
(4)
C
D
B
AAB
D
C
(5)L
(5)R
(3)
(2)
(7)
I
I
I
(5)R
(2)
(5)L
(3)

Page 5
Figure 5
You have two options when placing cushion
on top of the chest.
Option 1: Place cushion directly on top of
the chest. The cushion is removable for this
option.
Option 2: Stick male velcro strip on the top
panel of the chest as shown. Then, attach
female velcro on the underside of the
cushion (6). Place the cushion on the top
panel where the female and male velcro
meet. If you choose this option, the velcro
strips will remain permanently.
Now your chest is ready to use.

Page 6
Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
ddress
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form