SP01 MOHANA User manual

MOHANA
DESIGNED BY TIM RUNDLE
ASSEMBLY INSTRUCTIONS

DISCLAIMER
ENSURE THAT ALL STEPS ARE FOLLOWED IN THE CORRECT ORDER AND
THAT NO STEP IS LEFT OUT.
A MINIMUM OF TWO PEOPLE ARE REQUIRED FOR ASSEMBLY.
TO PREVENT ANY DAMAGE OF THE PRODUCT, DO NOT USE A BOX CUTTER,
KNIFE OR SHARP OBJECT TO OPEN THE BOXES.
DO NOT LIFT THE TABLE BY ITS TOP. IF YOU HAVE TO LIFT THE TABLE, LIFT
IT BY HOLDING ONTO THE METAL STRUCTURE.
SPØ1DESIGN.COM

© Copyright 2019 SP01 Design.
All rights reserved.
SPØ1DESIGN.COM
p. 3
MOHANA
PACKAGING
PARTS
BOX WITH METAL BASE
AND GLASS TOP
MARBLE TOP,
3 SCREWS
GLASS TOP,
METAL BASE WITH ALREADY
ASSEMLBED PLASTIC RUBBERS,
3X
BOX WITH MARBLE TOP

1
2
3
© Copyright 2019 SP01 Design.
All rights reserved.
SPØ1DESIGN.COM
p. 4
MARBLE TOP ASSEMBLY
REMOVE THE METAL STRUCTURE FROM ITS PACKAGING AND PLACE IT ON THE FLOOR.
REMOVE THE MARBLE TOP FROM ITS PACKAGING AND PLACE IT ONTO THE THREE FIXING POINTS
OF THE STRUCTURE.
USE THE PROVIDED HARDWARE TO FIX ONE SCREW AFTER THE OTHER, TAKING CARE TO NOT TIGHTEN
THE SCREWS TOO MUCH. WE SUGGEST TO BEGIN FIXING THE POINTS CONNECTED TO THE ROUND
STRUCTURE FIRST (1&2), AND FINALLY FIX THE FREE STANDING LEG (3). YOU MIGHT NEED TO MOVE THE
METAL PART SLIGHTLY IN ORDER TO BE ABLE TO INSERT THE LAST SCREW.
MOHANA

© Copyright 2019 SP01 Design.
All rights reserved.
SPØ1DESIGN.COM
p. 5
GLASS TOP ASSEMBLY
REMOVE THE GLASS TOP FROM ITS PACKAGING AND PLACE IT INTO THE ROUND SHAPE OF THE METAL
STRUCTURE WITH THE COLOURED/FLUTED SIDE FACING DOWN.
CHECK THE OVERALL STABILITY.
MOHANA

© Copyright 2019 SP01 Design.
All rights reserved.
SPØ1DESIGN.COM
p. 6
MOHANA