
Customer Service 1-888-707-1880 Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
FITNESS EQUIPMENT SAFETY INSTRUCTIONS
To disconnect, turn all controls to the off position, then remove the plug from the outlet.
Do not operate equipment on deeply padded, plush or shag carpet. Damage to both carpet and
equipment may result.
Before beginning, this or any exercise program, consult a physician. This is especially important for
persons over the age of 35 or persons with pre-existing health conditions.
Do not attempt to use your equipment for any purpose other than for the purpose it is intended.
Keep hands away from all moving parts.
The pulse sensors are not medical devices. Their purpose is to provide you with an approximate
measurement in relation to your target heart rate. Use of a chest transmitter strap (sold separately)
is a much more accurate method of heart rate analysis. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as
exercise aids in determining heart rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
equipment. Quality athletic shoes are recommended to avoid leg fatigue.
Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose
yourself (and possibly others) to injury, and reduce the longevity of the equipment.
IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%)
or more, the performance of your elliptical may be affected. Such conditions are not covered under
your warranty. If you suspect the voltage is low, contact your local power company or a licensed
electrician for proper testing.
NEVER expose this elliptical to rain or moisture. This product is NOT designed for use outdoors, near
a pool or spa, or in any other high humidity environment. The operating temperature specification is
5 to 48 degrees Celsius (40 to 120 degrees Fahrenheit), and humidity is 95 non-condensing (no water
drops forming on surfaces).
Circuit breakers: Avoid AFCI/GFCI circuit breakers if possible. These breakers may occasionally trip
during use because of the high inrush currents from the elliptical drive motor. This condition is an
issue with all elliptical and other products with large motors or electric heating elements like ovens.
New laws in your area may require these breakers. If you do have these breakers and outlets in your
home and are experiencing nuisance tripping, you should check to see if there are any other devices
plugged into the same circuit like fluorescent lights with electronic ballasts, coffee maker, space
heater, etc. Optimally the elliptical should be the only device plugged into the circuit.
Our elliptical have surge suppressors built in to help avoid nuisance tripping. We have tested several
AFCI/GFCI breakers and outlets with our products that do not trip when only the elliptical is
connected. Brands we have tested are Eaton (Cutler-Hammer Series), Leviton (Smart lock pro) and
Schneider Electric (Canadian home series).