Spon XC-9031V User manual

IP Video Intercom Paging Console Installation Instructions
1
Interface description
Front
①Microphone pole socket: insert the microphone pole, collecting audio.
②Working indicator: offline status is red, device has login to the sever is green.
③Reset interface: Use the tweezers to rest.
④Emergency broadcast: press "emergency" button for 1 second, it can broadcast to the
all groups, press to stop broadcast. ⑤Volume control button. ⑥Mute button.
⑦Microphones: Collecting local intercom audio in hands-free mode.
⑧Loudspeaker: Restore the remote and local sound. ⑨Camera: Collect local video.
⑩Touch-screen: Human-machine interaction input channel to receive the command.
Back
①HDMI interface: connect the display ②Network interface: Insert the cable to
connect server. ③Alarm input/output port (reserved port)
④Power interface: connect with power DC12V/ 3.3A.
⑤Line output interface ⑥Line input interface ⑦Handset interface
⑧USB interface. ⑨SD card slot ⑩Camera: Adjust the camera angle
Note: Please refer to the user manual for detailed information.

IP Video Intercom Paging Console Installation Instructions
2
Wiring
Installation diagram
The device supports the optional bracket for wall mounting. The installation method
is as follows: Fix the bracket to the wall with a plastic expansion sleeve (F7) and
self-tapping screws (BA4*25), and then fix the device on the bracket.
IP video intercom paging console settings
Network parameters settings
（1）Click【setting】button and input the password【123456】to enter the setting
interface when IP video intercom paging console is free.
（2）Choose the system settings and the network parameters to set IP video
intercom paging console ID No, local IP , server IP and local port, then click save button.
Browse WEB page
（1）Enter IP video intercom paging console IP address（the default is 192.168.1.101）
on the browser bar, then enter.
（2）Enter the user name (admin) and password (admin) from the Web login window,
then click OK.

IP Video Intercom Paging Console Installation Instructions
1
Specifications, Functional Unit and Parameters
Power input
DC12V/3.3A or PoE IEEE802.3af
Power consumption
≤20W
Network protocol
TCP、UDP、ARP、ICMP、IGMP、HTTP、FTP、SIP
Network chip rate
10/100Mbps
Audio coding
MP2/MP3/PCM/ADPCM
Audio sampling
8kHz～44.1kHz，16bit, 8kbps-320kbps
Line Output Rated Voltage
1.1V
Frequency response
60Hz-7kHz
Total harmonic distortion
≤0.3%，1kHz
SNR
≥70dB（AWeighted）
Camera
CMOS 500W pixel
Video bit rate
96Kbps-2048Kbps，32kbps~320kbps
Built-in amplifier power
3W
Network delay
Talk delay≤30ms
Display screen
TFT 10.2"LCD 1280x800
Interface
1 RJ45 network, 1 alarm in, 1 alarm output, 1 line
output, 1 line input, 1 HDMI port, 2 USB port, 1
receiver port
Dimensions
337x211x32.7mm
Trouble shooting
Fault phenomenon
Fault reason & exclude
The video of IP Video
Intercom Paging Console can
not be saw during intercom?
1. Check whether the display video in the function
parameters of the IP video intercom paging console
is open or not.
2. Adjust the camera angle of the IP video intercom
paging console. Select local video in the settings to
check whether there is video. If there is no video,
please adjust the angle of the camera until the
video screen appears;
3. Check whether the video of IP video intercom
paging console in the intercom has been closed.
Packing list