Sport-thieme 115 6603 Manual

Operating/assembly instructions
Universal posts
Prod. code 115 6603
Page 1of 3
02/2016
Operating/assembly instructions for universal posts
Thank you very much for choosing a product. We want to make sure
that you can enjoy this product, so here is some important advice for your safety as
well as for the use and maintenance of the equipment. Please read these
instructions fully before you assemble and use the equipment:
Ill. 1: Universal posts with
three sliders each
Included:
Pos. Description
1 2 x universal post
2 6 x slider (3 each)
1. General
The universal posts are used in ground sockets. They are used with the ground
sockets in sports halls.
The ground sockets are fitted in the floor slab (see ill. 6)
The height of the net can be freely adjusted for volleyball, tennis, fistball etc. on the
universal posts. The posts are 3.00 m long and made from galvanised steel tubing ø
83 mm.
Each post comes with three adjustable sliders. Two sliders have a hook for net
tensioning and the third one has a guide pulley. The cords and sliders are
arranged as in ill. 2.

Operating/assembly instructions
Universal posts
Prod. code 115 6603
Page 2of 3
02/2016
Additional parts are shown in ill. 4 and 5.
2. Operating and assembly instructions
Once you have inserted the universal posts into the ground sockets, you can
attach the net to the hooks (see ill. 2).
When you have finished playing, the universal posts can be removed very easily
from the ground sockets by pulling them and then carried to the respective storage
space. In order to prevent injuries, the respective covers should be put in place
once the posts have been removed.
The covers are intended to protect the sockets from any dirt.
Ensure that there is no dirt in the ground sockets!
Net cord
Slider
Tensioning cord
Ill. 4: Safety tensioning device !
115 7231
Posts
Tensioning
cord
Ill. 2: Post with tensioning cords
Ill. 3: Set of sliders
Ill. 5: Ground socket !
151 5608-1

Operating/assembly instructions
Universal posts
Prod. code 115 6603
Page 3of 3
02/2016
Ill. 6: Installation ground sockets
Key for above illustration:
The products marked !are not included!
3. Maintenance and care
Check the ground sockets regularly for dirt and deformations. Ensure that
you do not exceed the maximum load for the posts.
Dangling from the tensioning cord or the net leads to an overload of the safety
tensioning device and may result in the construction being destroyed!
Caution: Do not overload or climb the equipment!
Maintenance and care instructions
Instructions: Carry out a visual check at regular intervals. Due to our
continuous quality control of the products, technical changes
may occur which may lead to slight deviations in the
instructions.
Check at regular intervals that the screw connections are tight.
Check the equipment for possible damage and replace worn-
out parts.
Ensure that moveable parts are free-moving.
We are happy to answer any questions you may
have.
Your Sport-Thieme Team
Einbaumaße Bodenbuchse in der Halle
Ground socket installation dimensions in the hall
OKFF
FF
Bodenhülse
ground socket
Betonplatte
concrete slab
wird bei Montage ausbetoniert
filled with concrete when fitting
Kies
gravel