Sport-thieme 126 4920 Manual

Operating/assembly instructions
Exercise mat storage trolley
Page 1 of 3 02/2016
Prod. code: 126 4920
Operating/assembly instructions
for exercise mat storage trolley
Thank you very much for choosing a Sport-Thieme product. Please read the
instructions fully before you assemble the equipment so you can enjoy the product
and its guaranteed safety.
When you open the package, please ensure all the necessary parts are included:
(1) 1 x base with mounted swivel castors
(2) 2 x aluminium rails with 4 T-nuts, 4 washers 8.5 x 34 x 1.5 and 4 bars ø 14
with thread M8 (pre-assembled)
(3) 2 x post 30 x 30
(4) 4 x star knob screw M8 x 40
(5) 4 x washer 8.4 x 20 x 2.0
(6) 4 x socket head screw with nut M10 x 60
(7) 4 x wedge plate M8
38367 Grasleben / Germany
Telephone: [phone]
www.sport-thieme.com
Illustration 1: mat transport trolley

Operating/assembly instructions
Exercise mat storage trolley
Page 2 of 3 02/2016
1. General
This transport trolley for exercise mats with hanging eyelets is the ideal storage option
for your mats. The trolley can store and transport mats that are 1.20 or 1.80 m long.
The hanging rails can be adjusted into an upper or lower position as appropriate. The
hanging width can be individually adjusted to approx. 800 mm. The length of the mats
should not exceed 1800 mm and the width should not exceed 900 mm! Furthermore,
the mat transport trolley has abrasion-resistant swivel castors with locking brakes for
clean and safe handling.
2. Assembly instructions
Position the base with mounted swivel castors on the floor so that the castors are
underneath. Screw both posts !to the base "using the socket head screws
included #(see illustration 4). Using 2 star grip screws $,
2 x washers 8.4 x 20 x 2.0 %and 2 wedge plates M 8 &, bolt the pre-assembled
aluminium rails 'on the posts !, to the posts’ threaded inserts at a height of either
1.20 m or 1.80 m (see illustration 2). As you can see in illustration 3, the rail 'must
be installed to the wedge plates (and the smaller loose wedge plates &) in such a
way that the bars point slightly up. The loose wedge plate &is installed in the
opposite direction, which guarantees a parallel surface for the star knob screw $(see
illustration 2).
Ensure the screws are tight.
Wedge plate stuck
Ill. 2: assembly of aluminium rail
Ill. 1: exploded diagram

Operating/assembly instructions
Exercise mat storage trolley
Page 3 of 3 02/2016
Ill. 4: base and post connection
Caution: do not overload or climb the equipment!
Maintenance and care instructions
Instructions: Carry out a visual check at regular intervals.
Due to our continuous quality control of the products,
technical changes may occur which may lead to slight
deviations in the instructions.
Check at regular intervals that the screw connections are
tight.
Check the equipment for possible damage and replace
worn-out parts. Ensure that moveable parts are free-
moving. The equipment is designed solely for transporting
exercise mats with hanging eyelets. Do not use to
transport people. Only release the brakes when moving
the trolley.
We are happy to answer any questions you may have.
Your Sport-Thieme Team
Ill. 3: aluminium rail, side view