Sport-thieme 251 0620 Manual

Page 1 of 4 02/2016
Operating/assembly instructions
Sport-Thieme vibration board set
Prod. code: 251 0620
38367 Grasleben / Germany
Telephone: [phone]
www.sport-thieme.com
Operating/assembly instructions for the Sport-Thieme
vibration board set
Thank you very much for choosing a product. We want to make
sure that you can enjoy this product, so here is some important advice for your
safety as well as for the use and maintenance of the equipment. Please read
these instructions fully before you assemble and use the equipment.
Included:
1 x Sport-Thieme vibration board (prod. code 251 0604)
Incl. 1 1x vibration board
2 1x connecting cable

Page 2 of 4 02/2016
Operating/assembly instructions
Sport-Thieme vibration board set
Prod. code: 251 0620
1 x amplifier set (prod. code: 251 0617)
1 x amplifier
1 x subwoofer
2 x speaker

Page 3 of 4 02/2016
Operating/assembly instructions
Sport-Thieme vibration board set
Prod. code: 251 0620
1. General
The Sport-Thieme vibration board allows you to feel sound. Due to the integrated
vibration generator, the vibrations are transferred to the board and can be felt by
the user. You can sit, stand or lie on the board. It is also possible to simply lean
against it. The vibration effect can be felt as soon as the body comes into contact
with the board. Your body vibrates and feels the sound waves.
In terms of its impact and use, the vibration board is designed and built for
universal and easy use. It is low maintenance and is easy to store due to its flat
design. During operation, there is barely any additional noise and the board can
therefore be used without difficulty in rooms with many people around. The
surface can be increased if necessary by placing several boards next to one
another. The vibration board is designed in such a way that it can also be used
with a wheelchair.
We wish you lots of fun with the Sport-Thieme vibration board.
2. Operating and assembly instructions
To begin operating the board, simply plug the white connecting cable (2) to the
amplifier’s subwoofer outlet (SW).
The subwoofer included is not required to use the vibrations board. However, it
can alternatively be used purely for audio playback. The instructions on how to
set up the amplifier can be found on the unit’s packaging. The unit can also be
used separately for other purposes.
©

Page 4 of 4 02/2016
Instructions:
Operating/assembly instructions
Sport-Thieme vibration board set
Prod. code: 251 0620
Caution: Do not overload the equipment!
Maintenance and care instructions
Carry out a visual check at regular intervals.
Due to our continuous quality control of the products, technical
changes may occur which may lead to slight deviations in the
instructions. Check at regular intervals that the screw
connections are tight.
Check the equipment for possible damage and replace worn-out
parts.
We are happy to answer any questions you may have
Your Sport-Thieme Team