SportsArt Fitness P857 User manual

1
P857 OWNER’S MANUAL CONTENTS
1. INTRODUCTION ................................................................................................................. 2
2. SAFETY PRECAUTIONS .................................................................................................... 3
3. LIST OF PARTS .................................................................................................................. 4
4. ASSEMBLE THE PRODUCT ............................................................................................... 9
STEP 1 Cover Support Plate and the Connector Installation................................................... 9
STEP 2 Weight Stack Installation............................................................................................. 13
STEP 3 Cam Installation.......................................................................................................... 17
STEP 4 Cable Installation......................................................................................................... 19
STEP 5 Handle Installation....................................................................................................... 23
STEP 6 Cylindrical Cushion Arm Installation............................................................................ 24
STEP 7 Seat Bottom and Cylindrical Cushion Installation........................................................ 25
STEP 8 Apply the Weight Stack Sticker.................................................................................... 27
STEP 9 Front Cover and the Rear Cover Installation .............................................................. 28
STEP 10 Install plastic cover ................................................................................................... 31
STEP 11 Install cap nut ............................................................................................................ 32
STEP 12 Secure the Product .................................................................................................. 33
STEP 13 Level the Product..................................................................................................... 34
STEP 14 Cable Adjustment...................................................................................................... 35
STEP 15 Stack Fork Inspections............................................................................................... 36
STEP 16 Unit Inspection.......................................................................................................... 37
5. OPERATION INSTRUCTION .............................................................................................. 38
OPERATION Safety Operating Area ....................................................................................... 38
OPERATION Exercising Instructions ...................................................................................... 39
6. MAINTENANCE ................................................................................................................... 43
MAINTENANCE Safety Precautions ...................................................................................... 43
MAINTENANCE Guide Rod Cleaning and Lubricating ............................................................ 44
MAINTENANCE Schedule ....................................................................................................... 45
MAINTENANCE Task List ....................................................................................................... 46
MAINTENANCE One-Year Maintenance Log .......................................................................... 47
7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................................................... 48
8. APPENDIXES ...................................................................................................................... 49
APPENDIXES Optional accessories ........................................................................................ 49
Disclaimer
The information in this user manual is subject to change without prior notice.
Sports Art Industrial Co., Ltd. makes no representation or warranty of any kind, express or
implied, regarding the marketability of this manual, the suitability for a special purpose, or any
other matters.
SportsArt Industrial Co., Ltd. accepts no responsibility for any errors in this manual, or any
damages incurred directly, indirectly, accidently, or continually from the modication, display, or
other use of this manual.
*We reserve the right to revise this manual at any time without notice.

2
1. INTRODUCTION
Congratulations on the purchase of a high quality SportsArt product, the P857 machine. Constructed of high
quality materials and designed for years of reliable performance, this product was made for full commercial
use.
Before this product is assembled or operated, we recommend that you familiarize yourself with this manual.
Understanding the correct assembly and operation of this product will help ensure that exercisers obtain
their tness goals safely and successfully.
1042mm(41 )
1447mm(57 )

3
2. SAFETY PRECAUTIONS
This product was designed and built for optimum safety. However certain precautions apply during the use
of this product. Please note the following safety precautions:
• Please read the entire manual before assembly and operation. Make sure the product is installed and
operated as instructed in this manual.
• Assemble and operate the product on a solid, level surface. Do not use outdoors or near water, including
pools and saunas.
• Check the product before every use. Make sure all parts are assembled, and all fasteners are tightened.
Do not use the product if it is disassembled in any way.
• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes with leather soles or high
heels. Tie all long hair back. Do not go barefoot on this product.
• Keep away from moving parts. Moving parts may or may not stop immediately if an object becomes
caught or impedes normal motion.
• Use this product only for its intended purpose as described in this manual.
• Be careful when mounting and dismounting the unit.
• Never operate this product if it has been damaged in any way. If it is not working properly, or has been
dropped or damaged, contact a service technician for repairs.
• Do not use accessories or parts that are not specifically recommended by the manufacturer (SportsArt).
Such parts might cause injuries or cause the unit to fail and void the warranty. We are not responsible for
any safety issue that arises due to the misuse of accessories or parts. At the same time, we will terminate
the warranty terms of this equipment.
• This product is not intended for use by persons (including children 14 or younger) with reduced physi-
cal, sensory, or mental capabilities, or by people who are otherwise deficient in product knowledge or
experience. If such people use this product, they should be given training and be supervised at all times
by someone responsible for their safety.
• Contact your SportsArt representatives on all materials damaged in shipment. (Note: Shipping damages
are the responsibility of the carrier.)
• Unpack and verify contents of boxes according to the list of parts to check if any parts are missing.
• Children 14 or younger should be supervised to ensure that they do not play on or near the product.
• The user weight limit for this product is 227 kg, 500 lb.
• Maintenance and repair must be performed by trained service personnel only. Improper maintenance
would not only damage the machine, but may also present a danger to the exerciser.
• Over exercise may result in serious injury or death
• Warning that any of the adjustment devices that could interfere with the user’s movement should not be
left projecting.
CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORKOUT and consult your
physician immediately. Work within your recommended exercise level. DO NOT work to exhaustion. Before
beginning any exercise program, you should consult with your doctor. It is recommended that you undergo
a complete physical examination.
*NOTE: Each machine provides a different resistance ratio of weight stack.

4
3. LIST OF PARTS
Box A
A14
A12
A42
A16
A17
A19
A18 A33
A34
A41
A9-2
A9-1
A13
A15 A10
A1
A2
A3 A4 A5
A6
A7
A8

5
Box B
Box C +Box D
A20
A26
A27
A28
A31 A30
A29
A32
A21 A23
A24
A25
A40

6
Box A - Main Frame Components
No. Name Qty. No. Name Qty.
A1 Left/right perforated boards 2 A11 Cover support plate A 1
A2 Left/right side cover 2 A12 Pulley cover 1
A3 Main frame 1 A13 Pulley 1
A4 Cover support plate B-2 1 A14 Rear cover 1
A5 Cover support plate B-1 1 A15 Front cover 1
A6 Front cover A 1 A16 Bracket 2
A7 Stack fork 1 A17 Bracket 4
A8 Weight stack rod 1 A18 Ground xing bracket 1
A9-1 Anchor bracket of shroud
(square hole) 2 A19 U bracket 1
A9-2 Anchor bracket of shroud
(tapped hole) 2 A33 Top cover 1
A41 Weight plate sticker
(10kg~60kg/22lb ~132lb) 1 A34 Anchor bracket 2
A42 Weight plate sticker
(65kg~100kg/143lb~220lb) 1
Box B - User Frame Components
No. Name Qty. No. Name Qty.
A20 CAM 1 A27 Connector A 1
A21 Handle 1 A28 Connector B 1
A23 Seat back 1 A29 Connector C 1
A24 Seat frame 1 A30 Ø50 Connecting board 5
A25 Seat bottom 1 A31 Ø50 Connecting board A 1
A26 Cylindrical cushion arm 1 A32 Finger Guard
Box C + Box D - Weight Plates Components
No. Name Qty. No. Name Qty.
A40 5kg/11lb weight plate 15

7
Components in the Hardware Kit
No. Name Qty. Specication Notes
12 Screw soft cap 1
13 Phillips screw 6 M6*P1.0*L12
14 Screw socket 1 batch SGN- 07
15 Mushroom top inner hex screw 12 M6*P1.0*L12
16 Mushroom top Phillips screw 8 M5*L15
17 Mushroom top Phillips screw 10 M5* 0. 8* L8
18 Round sticker 1 D25
21 Phillips pan head sheet metal
screw 6 M4*L12
22 Phillips Umbrella head sheet
metal screws 2 M4*L14
23 Round screw cap 2
50 Flat washer 2 D27*d6.3*t3.0
Mushroom top inner hex screw 2 M5*L20
Open end wrench 2 (13*17)
Phillips-head screwdriver 1
59 Fastener 1 batch
Cap nut 1 batch
L-shaped Allen wrench M6*L120mm*W28
L-shaped Allen wrench M4*L60mm
L-shaped Allen wrench M5*L114mm*W24
Components on the Product
No. Name Specication Notes
21
Hex head screw M10*P1.5*L130
Spring washer M10
Washer D16*d10.2*t1.0
Nylon hex lock nut M10
22 Upper stack carriage set
23
Hex bolt M8*P1.25*L65
Washer D17*d8.3*t2
PU tube ØD12*d8*L51
Nylon hex lock nut M8
24 Guide rod
25
Round head inner hex screw M8*P1.25*L18
Spring washer M8*t2.0
Washer D17*d8*t1.5
26 Round head inner hex screw M8*P1.25*L20
27 Axle cover Ø65

8
Components on the Product
No. Name Specication Notes
28 Mushroom top inner hex screw M6*P1.0*L20
29
Mushroom top inner hex screw M6*P1.0*L12
Spring washer M6
Flat washer D20*d6.3*t1.5
30 CAM stop plate
31 Mushroom top inner hex screw M6*P1.0*L10
32 Cable set block
33
Mushroom top inner hex screw M6*P1.0*L20
Spring washer M6
Nylon hex lock nut M6
34 Round head inner hex screw M8*P1.25*L20
35
Mushroom top inner hex screw M8*P1.25*L25
Spring washer M8
Flat washer D17*d8.3*t2
Nylon hex lock nut M8
38
Mushroom top inner hex screw M8*P1.25*L25
Spring washer M8
Washer D22*d8.2*t2
39 Seat back plate
40 Bevelled head inner hex screw M8*P1.25*L12
Flat washer D17*d8.3*t2
41 Mushroom top inner hex screw M6*P1.0*L12
43 Mushroom top Phillips screw M5* 0.8* L15
Flat washer D13*d6*t1.0
45
Mushroom top inner hex screw M6*P1.0*L20
Flat washer D16*d6.3*t2
Nylon hex lock nut M6
46
Reinforcement plate
Anchor bracket
Umbrella hex screw M6*P1.0*L20
Plastic cover
47 Umbrella hex screw M6*P1.0*L12

9
4. ASSEMBLE THE PRODUCT
Follow instructions below to assemble this product. Note that in this manual the words “left” and
“right” are used to refer to the product and its parts. As such, these designations correspond to the
“left” and “right” sides of a person in position to exercise on this product. Also, for brevity, the word
“screws” or “nuts” is used where washers and other hardware may be involved.
STEP 1 Cover Support Plate and Connector Installation

10
STEP 1 Cover Support Plate and Connector Installation (CONT.)
(a). Insert the screw sockets (14) into place in the main frame (A3) as shown, and then use the
screws (15) (16) to secure the brackets (A16) (A17) in place.
(Note: The bracket (A16) must be secured to the top of maim frame as shown.)
(a)

11
STEP 1 Cover Support Plate and Connector Installation (CONT.)
(b). Use the screws (17) to secure the cover support plates (A10) to the straight frame of the main
frame (A3) and then secure the cover support plates (A4) (A5) to the both side of the curved
frame as shown.
(Note: The cover support plates must be secured outside of the bracket (A16) (A17).)
(b)
60
A10
A3
A5
A4
A4
60
17

12
STEP 1 Cover Support Plate and Connector Installation (CONT.)
(c). Use the screws (21) to secure the connecting board A (A31) to the connector C (A29) and
the main frame (A3) in area A. Use the screws (21) to secure the connecting board (A30) to
the connector C (A29) and the seat frame (A24) in area B. And then use the screws (21) to
secure the connecting board (A30) to the connector A (A27), the connector B (A28), the main
frame (A3) and the seat frame (A24) as shown.
A3
A3
21
21
A24
A29
A30
A24
A27 A30
A30
A30
A28
A30
A31

13
STEP 2 Weight Stack Installation

14
STEP 2 Weight Stack Installation (CONT.)
(a) Hold the upper stack carriage set (22), and then cut the zip tie. Gently lower the upper stack
carriage set (22) into place as shown.
(b) Remove the screws (23). Set the guide rod (24) downward into place as shown.
(c) Tilt the guide rod (24) backward and then lift the upper stack carriage set (22) off the guide
rods as shown. Carefully set the upper stack carriage set (22) aside.
22
24
22
23
24
(a)
(b)
(c)

15
STEP 2 Weight Stack Installation (CONT.)
(d) Loosen and remove the screws (25) from the stack fork (A7) and insert the weight stack rod
(A8) into the central mounting position of the upper stack carriage set (22). Use the screws
(25) to secure the stack fork (A7) into place of the upper stack carriage set (22) as shown.
(Note: Remove the stack fork first before assembling.)
(e) Insert and lower the (5 kg/11lb) weight plates (A40) into place on the guide rods (24) one at a
time. Once complete, slide down the upper stack carriage set (22) on top of the weight stack.
(Note: The stack fork (A7) points toward the front.)
* If there is an optional (7.5kg/16.5lb) weight plate installed, insert the optional weight plates first
before the (5 kg/11lb) weight plates (A40).
(Note: The convex side of weight plate should face up.)
*Install the cap nuts on the screws.
(d) (e)
25 60
22
22
22
60 M4/M5

16
STEP 2 Weight Stack Installation (CONT.)
(f) Tilt the guide rods (24) back into place and then lift them up to their mounting position, and
then secure the assembly with screws (23).
*Install the cap nuts on the screws.
A3
23
24
24 65 M8
65

17
STEP 3 CAM Installation

18
STEP 3 CAM Installation (CONT.)
(a) Loosen and remove screw (26) and the cap (27) from the CAM (A20).
(b) Place the CAM (A20) horizontally into its mounting area, and then rotate the cam so that the
rotator arm is pointing downward as shown.
(Note: Due to the CAM hasn’t been connected to the cable yet, to avoid any injuries, please
make sure no one is near the CAM.)
(c) Secure the axle cover (27) in place with screws (26), and then apply the round sticker (18) as
shown.
(Note: The stopper must be rested below the tube as shown.)
(b)
(c)
(a)
A20
27
26
27
26
18

19
STEP 4 Cable Installation

20
STEP 4 Cable Installation (CONT.)
(a) Insert the cable nut as indicated by the arrows onto the weight stack rod (A8) at least 15-
20mm deep as shown.
(b) Take out the stack fork (A7) and lift the upper stack carriage set (20) up.
(c) Insert the stack fork (A7) into the stack rod (A8) so that the cable is loose. This will make the
next assembly easier.