SPRT SP-POS893 User manual

SPRT®
POS Thermal Receipt Printer
(SP-POS893)
User’s Manual
（Ver 1.01）
Beijing Spirit Technology Development Co.,Ltd.
www.sprt-printer.com

Content
Introduction.............................................................................................................................. 1
Chapter 1 Feature and Performance...................................................................................1
1.1 Print Performance..................................................................................................... 1
1.2 Print Paper................................................................................................................. 2
1.3 Print Font....................................................................................................................2
1.4 Interface......................................................................................................................2
1.5 Print Control Commands......................................................................................... 2
1.6 Power Supply.............................................................................................................3
1.7 Operation Environment............................................................................................ 3
1.8 Outline Dimension.....................................................................................................3
1.9 Model classification...................................................................................................3
Chapter 2 Operation Specification....................................................................................... 3
2.1 Printer Appearance...................................................................................................3
2.2 Paper Installation...................................................................................................... 5
2.2.1 Paper Loading.................................................................................................5
2.2.2 Solution to Paper Jam....................................................................................5
2.3 Interface......................................................................................................................6
2.3.1 Ethernet Interface........................................................................................... 6
2.3.2 USB Interface.................................................................................................. 6
2.3.3 Cash Drawer Interface................................................................................... 6
2.3.4 Power Connection.......................................................................................... 7
2.4 Buzzer, Buttons and Indicators...............................................................................8
2.5 Power on status..................................................................................................... 10
2.6 Self-test.................................................................................................................... 10
2.7 Hexadecimal Printing............................................................................................. 11
2.8 Parameter Setting..................................................................................................12
2.9 Enter the program upgrade mode........................................................................12
Appendix A............................................................................................................................ 13

1
Introduction
SP-POS893 printer is a new type line thermal printer, it features in fast speed print,
low print noise, high reliability, perfect print quality and ribbon needless, avoiding the
vexation of regular maintenance.
SP-POS893 printer: small in outline dimension, simple operation, and extensive
application, especially suitable for commercial cash register, PC-POS, bank POS
and all kinds of receipts print.
Warning
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
Chapter 1 Feature and Performance
1.1 Print Performance
●Print method: direct thermal
●Print paper width: 79.5±0.5mm
●Print density: 8 dots/mm, 576 dots/line
●Print speed: Max 220mm/s (20% density)
●Reliability
(1)Print Head Life:150km
Using condition:
*Print 12 × 24 ASCII characters, print 50 lines each time, intermittent print
repeatedly
*Use specified thermal paper
(2)Cutter Life: 1500,000 cuts
●Valid print width: 72mm

2
1.2 Print Paper
●Thermal paper roll model: TF50KS－E (Japan paper co.ltd)
AF50KS-E (JUJO THERMAL)
●Thermal paper roll: Paper Type－－Thermal Paper 79.5 xф80mm（max）
Inner Diameter－－－13mm (min.)
Thickness －－－ 0.06mm～0.08mm
1.3 Print Font
●ANK Character Set
12×24 dots,1.5（W）×3.00（H）mm
●GB GB2312-80(Chinese):
24×24 dots,3.00（W）×3.00（H）mm.
1.4 Interface
● Ethernet Interface:
Standard Ethernet interface.
●USB Interface:
Standard USB interface
●Cash Drawer Control
DC24V, 1A, 6-pin RJ-11 socket.
1.5 Print Control Commands
● Character print commands: support double-width, double height print of ANK
characters, user-defined characters and Chinese characters, the character line
spacing is adjustable.
● Graphics print commands: support the print of bit-map graphics and download

3
bit-map graphics with different density
● GS bar code print commands:
support UPC-A, UPC-E, EAN-13, EAN-8, CODE39, ITF25, CODEBAR, CODE93,
CODE128, PDF417, QR code, DATA Matrix code print.
1.6 Power Supply
● DC24V±10％, 2A, A-1009-3P power socket
1.7 Operation Environment
● Operation temperature: 5～50℃; Relative humidity: 10～80％
● Storage temperature: -20～60℃; Relative humidity: 10～90℃
1.8 Outline Dimension
● 179(L)mm×152(W) mm×118 (H)mm
1.9 Model classification
Model
Interface
Print speed (Max)
SP-POS893Udn
USB
200mm/s
SP-POS893UEdn
USB, 100M Ethernet
Chapter 2 Operation Specification
2.1 Printer Appearance
Printer part name diagram:

4
Figure 2-1 Printer Part Name Diagram

5
2.2 Paper Installation
2.2.1 Paper Loading
Steps of Loading Thermal Paper are as below:
Hold down the upper cover button on the left side, open the movable upper cover,
draw a certain length of the paper roll, put the paper end on the print head, close the
upper cover and press it downwards lightly.
2.2.2 Solution to Paper Jam
If cutter jam, turn off the power, and turn on again, the cutter will be back to original
position. If paper jam, open the paper strage cover, and take out the paper. If the
cutter can not be back to the original position, open the cover of it, and turn the white
plastic gear by the direction suggestive on the cutter by hand to make the cutter be
back to the original position.
If cutter jam, but hope no loss of data in printer, don’t turn off the power. Get the
cutter back to the original position by the above mentioned method by hand. Then
open the paper cover and take out the paper, close the paper cover. The printer will
recover automatically from Cutting Error.
1. Pay attention to the direction of loading paper, make the printing surface face to the
print head.
2. Please don’t feed or draw the paper forwards or backwards with hands.
3. Keep clean of the print head, avoid to influence the printing quality.
！Caution!

6
2.3 Interface
2.3.1 Ethernet Interface
The model with Ethernet interface use RJ45 Network socket. The appearance is as
Fig.2-1 shows:
Fig 2-1 Ethernet Interface
2.3.2 USB Interface
The standard accessories of SP-POS893 printer includes a Mini USB cable with D
Type connector which connects printer and main device. The USB type belongs to
the slave device type(DEVICE). Pins description of Mini-USB as Fig.2-2 below:
2.3.3 Cash Drawer Interface
The cash drawer interface of SP-POS893 adopts RJ-11 6-pin socket, as Fig.2-3
shows:
Pin
Function
Notes
1
V Bus
Power +5V
2
Data-
Data-
3
Data+
Data+
4
GND
Ground
Fig.2-2 USB interface

7
Fig.2-3 Cash Drawer Interface
The pin assignment is as below:
Pin No.
Signal
Direction
1
Chassis Ground
——
2
Cash drawer driver
signal 1
Out
3
Cash drawer on/off
status signal
In
4
+24VDC
——
5
Cash drawer driver
signal 2
Out
6
Signal ground
——
2.3.4 Power Connection
SP-POS893 uses the external power supply adopter as 24V±10％,2A,
power socket is A-1009-3P model, as Fig. 2-4 shows:
The pin assignment is as below:
Pin No.
Signal
1
+24VDC
2
Ground
3
NC
Fig.2-4 Definition of power socket and pin

8
2.4 Buzzer, Buttons and Indicators
There is one button and one inner buzzers and three indicators on SP-POS893
printer.
【FEED】is paper feeding button, the function of its enabling or disabling the button
on/off can be set by print command, when the button is enabled, press 【FEED】
button, then the paper presenting driver starts up and paper fed into the printer;
release【FEED】button, paper feeding stops.
The buzzer indicates the error status type, which can be set to enabling error alarm
or disabling by parameter setting. Error status type is the same as error indicator.
The green POWER indicator light is the power indicator, and the POWER indicator
light is on to indicate that the printer has been turned on.
The red PAPER indicator is the paper status indicator, and when the indicator is on,
the printer is out of paper.
The red ERROR indicator light is an error status indicator, and the indicator light is
always on to indicate an error status, such as opening the cover. For details, refer to
"Error Indication Table"
ERROR is a red/blue dual-color indicator light, used to remind error status/incoming
order detection. When the printer is working normally, the red ERROR indicator light
is off. The indicator light flashes as an abnormal alarm state. When the indicator light
stays on, it means not printing The paper compartment cover was opened during the
process. The blue indicator light flashes to indicate an order reminder.
The order reminder indicator flashes, and the buzzer sounds 3 times: reminding the
order.
The error indicator flashes and the buzzer sounds: it means that the printer has an
error.
According to different flashing methods, indicate the type of printer error: