06
Can I pair more than two SRAM eTap AXS Wireless Blips to
my bike?
You can pair up to six eTap AXS Wireless Blips (3 pairs) can
be connected into the system at once. A total number of 8
individual controllers can be used with the AXS system: this
can be six units (3 pairs) of Wireless Blips with drop bar
controllers, or 7 units of Wireless Blips paired to a BlipBox
(as the BlipBox counts as one controller).
Can I pair my SRAM eTap AXS Wireless Blips to more than
one bike at a time?
You can pair eTap AXS Wireless Blips to one bike at a time
only. SRAM eTap AXS Wireless Blips need to be paired into
the new AXS drivetrain when moved from bike to bike.
Can I use SRAM eTap AXS Wireless Blips with my
RockShox Reverb AXS seatpost?
No, the eTap AXS Wireless Blips are not compatible with
RockShox Reverb AXS seatposts. The Reverb AXS requires
a shift button that sends a constant signal while actuating
the post. The eTap AXS Wireless Blip do not feature
continuous press or multi-shift function which is required
for Reverb AXS.
Are SRAM eTap AXS Wireless Blips compatible with eTap
11-speed controls?
No. SRAM AXS components are only compatible with other
components in the SRAM AXS ecosystem. Refer to the AXS
Components Compatibility Map for compatibility
information.
Can SRAM eTap AXS Wireless Blips be used with Eagle
AXS derailleurs and Eagle AXS controllers?
Yes. As long a there is a primary controller in the system,
Wireless Blips can be paired to the MTB controller or a
BlipBox.
Which eTap AXS systems work with SRAM eTap AXS
Wireless Blips?
SRAM eTap AXS Wireless Blips work with SRAM RED eTap
AXS, Force eTap AXS, and Rival eTap AXS systems as well
as XX1 Eagle AXS, X01 Eagle AXS, and GX Eagle AXS
systems. All derailleurs in the AXS system simply need to be
updated to the latest firmware utilizing the AXS Mobile App
to enable Wireless Blip use.
SRAM eTap AXS™Wireless Blips / FAQ
www . ec h el on s po rts . c om. au | i n f o@ec h el on s po rts . c om. au | 07 3457 9999
