SSS Siedle AIB 150 series User guide

System Manual
In-Home bus: Video
Issue 2019

Contents
Additional contact on the
BSM650-… 104
Button of a bus telephone on
the BSM650-… 105
Deleting the assignment on the
BSM650-… 106
Parallel door call to BSE650-… 108
Door call to BSE650-… 109
Button of a bus telephone on
the BSE650-… 110
Bus secondary signal unit
BNS750-… 111
Call via DRM612-… 112
Call via COM611-… 113
Door call to Jung indoor station 114
Parallel door call to Jung indoor
station 115
Internal call between Jung
indoor stations 116
7.2 Programming – Plug+Play
Basics 118
Example of a 4-family home 120
Procedure – Example 121
7.3 Programming – with PC
BPS650-… and PRI602-…USB 122
8 Supplementary functions
Switching and control functions 123
Switching and control functions 124
Door release actuation 126
Parallel door call, supple-
mentary power supply, video
memory 128
Storey call parallel switching 132
Supplementary contact, radio
chime, pilfer safeguard 133
Staircase light/Outside light 134
9 Servicing
Restart, exchange,
operating mode 135
Operating mode switch
BVNG650-… 136
LED displays BVNG650-… 137
Measured values 138
10 Glossary, Index 139
1 In-Home bus: Video
System description 3
2 Siedle Systemtechnik
Jung indoor stations 3
3 Safety remarks
Danger 3
4 Conguration, conductor
lengths
User assignment 4
Single line system 6
Single line system with
bus distributor 8
Single line system with bus
distributor and ZBVNG650-… 9
Multiple line system 10
Example to determine the
attenuation 12
Installation with YR 13
Installation with J-Y(St)Y,
increased range 13
Bus distributor for ush
mounted junction boxes 14
Attenuation values 15
Bus distributor for top hat rail
mounting 16
Attenuation values 17
5 In-Home: Video users
Door loudspeakers, call buttons 18
Door stations 19
Bus and external cameras 20
Bus distributor, Bus video
modulator 22
Power supply, line rectiers 24
Switching, control 25
Gateway, Software, License, PC
interface, DoorCom 26
Bus indoor devices 28
Jung indoor stations 32
Table-top accessory 33
Accessory 34
6 Installation
General information 36
Bus call button module,
bus video line rectier 37
Modular Jung indoor station 38
6.1 Installation video
Siedle Vario with BVPS/
BVPC850-0 40
Siedle Vario with SG150/650-0 42
SiedleVario 44
Side circuit 46
Star-shaped installation 47
Siedle custom-t
door loudspeaker 48
SiedleClassic 50
SiedleSteel 52
Siedle Vario with Intercom
functions 54
Siedle Vario 2 door stations 56
Multiple line system 58
Call via display call module 60
Additional external camera 62
6.2 Installation audio & video
SiedleVario 64
DoorCom Analog DCA650-… 66
Siedle Vario 3 door stations 68
Multiple line system 70
6.3 Siedle Systemtechnik
installation
Jung video indoor station 72
Jung audio & video indoor
station 74
Jung standard audio indoor
station & video indoor station 76
Siedle and Jung indoor stations
combined 78
7 Programming
Overview of functions 80
Remarks 86
7.1 Programming – manual
Activating the bus line rectier 87
Activating the bus door
loudspeaker 88
Activating the indoor devices 89
Activating Jung indoor devices 90
Door call to Siedle Basic 91
Door call to bus telephone 92
Door call to bus handsfree
telephone 93
Door call to Smart Gateway/
Smart Gateway Professional 94
Door call to standard bus video
panel 95
Door call to deluxe bus video
panel 96
Door call via the storey call
button 97
Parallel door call 98
Internal call 99
Dialling the door station 101
Selection external camera 102
Call differentiation of 2 door
stations 103
2

Conguration “Single line“
The In-Home bus: Video features
the same basic structure as a Siedle
In-Home bus: Audio installation.
Here too, the installation comprises
a two-core line. The essential differ-
ence to the In-Home bus: Audio is
supplementary transmission of the
video signal to the cores.
Up to 31 different users can be
connected, e.g. bus telephones with
video, handsfree bus telephones
with video, door stations or devices
for switching and control functions.
Technically speaking, one device can
encompass several users.
If the building installation permits,
installation can be performed
between one bus telephone with
video and the next bus telephone
with video. If the building instal-
lation does not permit looping
through between bus telephones,
additional bus video distributors
must be used. Without a bus video
distributor, no nodes or branches are
permissible in the line.
Conguration “Multiple line“
In-Home bus: Video “single line”
system is restricted to 31users;
In order to connect more than
31users, up to 15lines can be
coupled together. Each line requires
its own bus video line rectier
BVNG650-…
“Siedle Systemtechnik” and the
relevant logo are used to describe
devices, components or systems
which are not manufactured
and designed by Siedle but are
tted with Siedle technology. The
Systemtechnik logo guarantees tech-
nical compatibility with the Siedle
system world. Products identied
with “Siedle Systemtechnik” may
therefore be used without restric-
tions as components of a Siedle
communication system.
Jung indoor stations in switch
design
Within the framework of a cooper-
ation agreement with the company
Jung, Siedle equips Jung indoor sta-
tions with “Siedle Systemtechnik“.
Indoor stations from Jung which
bear the Systemtechnik logo on
their components, their packaging
or the product information, are fully
compatible with Siedle technology.
They are integrated in this manual as
Siedle system components.
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualied
electrician. Failure to observe this
regulation could result in the risk of
serious damage to health or fatal
injury due to electric shocks.
• When working at the device,
observe the remarks relating to
mains cut-off.
• Operation at an altitude of up to
2000m above sea level.
• Observe EN 62368-1!
In a building installation, an all-
pole mains switch with a contact
opening of at least 3mm must be
provided. The device must not be
exposed to water drops or sprayed
water! Sufcient ventilation must be
ensured. Pay particular attention to
ensure that ventilation slots are not
covered.
• Ensure maximum fusing of 16A
for the mains connection in the
building installation.
• When planning large-scale
(complex) systems, the distributor
space required for the switch panel
mounting devices must be taken
into consideration in the distributor
planning process.
• No external voltages >30VAC/DC
may be applied to bus users.
Devices with 230V connection
In accordance with DIN VDE0100
part410, section 411.1.3 attention
must be paid to ensuring a safe
separation between system lines
and the mains voltage; i.e. system
and mains cores must not be per-
mitted to touch! The system line
cable (extra-low safety voltage) must
be stripped back by the minimum
possible.
1 In-Home bus: Video
System description
2 Siedle Systemtechnik
Jung indoor stations
3 Safety remarks
Danger
3

4 Conguration, conductor lengths
User assignment
Devices occupying 1 user
AIB150-…
BTS850-…
BTC850-…
BFC850-…
BNS750-…
VIB150-…
BTSV850-…
BTCV850-…
BFCV850-…
BVPS850-…
BVPC850-…
BSE/BEM650-…
BSM650-…
Devices occupying 2 users
BTLM650-…
CLV1300xB-02
STL…
BTLE050-…
Devices with variable user assignment (depending on programming)
DCA650-…
SG150/650-…
BVM650-…
Devices occupying no users
BNG/BVNG650-…
VNG602-…
LNG600-…
NG602-…
TR603-…
BCMC650-…
BCM651/653/658-…
BTM650-…
BAA/BVVU/BVVS650-…
BAVU/BVVU/BVVS652-…
BIM650-…
PRI602-…USB
BRMA050-…
4

Devices occupying 1 user
SI4A..
SIAM…
SIAI…
SIVI…
Devices occupying no users
SIVM…
SITM..5073
SITM..5093
5

4 Conguration, conductor lengths
Single line system
Conguration of In-Home: Video
The basic Siedle In-Home bus instal-
lation type is the single line system.
Within this one line, installation
takes place from one device to the
next, provided this is allowed by the
building installation.
In buildings with a side circuit
and individual branches into the
apartments, the bus video distrib-
utor must be used. A maximum of
31users are admissible within any
one line. Users are dened as devices
which occupy their own address
within the bus. If more than 31users
are required, additional lines must be
congured. With only a few excep-
tions, all devices are assigned an
address. Up to 15lines with 31users
each can be congured.
Camera branch and monitor
branch
Within a line, a distinction is made
between the camera branch and the
monitor branch. Video door stations
are connected to the camera branch,
while bus telephones with video are
connected to the monitor branch. If
the installation requires an additional
monitor branch, so-called bus dis-
tributors must be used.
Users without video
In the case of In-Home: Video, audio
users can only be connected via a
bus audio decoupler BAA650-…
Switching and control devices are
also connected to the BAA650-…
Power supply
The nerve centre of every line is the
bus video line rectier, which con-
trols all the system functions. The
camera branch and monitor branch
are connected to it via separate
terminals.
Conductor material
Telecommunication or light current
conductors can be used for instal-
lation:
J-Y(St)Y Twisted pair conduc-
tors, shielded
CAT Network cable
A2Y(St)2Y Buried telecommunica-
tion cable
YR Light current con-
ductor 0.8mm core
diameter
The In-Home bus must be installed
on one pair of cores when using
J-Y(St)Y, and when using a YR
conductor, on two YR cores posi-
tioned side by side. Using J-Y(St)Y
conductors reduces the likelihood of
interference.
Conductor length
Conductor material J-Y(St)Y cable
with 0.8mm diameter:
• max. 150m from the bus video
line rectier to the most distant user
in the monitor branch
• max. 150m from the bus video
line rectier to the most distant user
in the camera branch
With a core diameter of 0.6mm,
the range is halved.
Network cable
Diameter Conductor
length
0,405mm AWG26 40m
0,511mm AWG24 60m
0,644mm AWG22 100m
Within the line, the maximum length
of the conductor material must not
exceed 1,500m.
Systems can also be congured with
using conductor material YR with
a core diameter of 0.8mm. This
will signicantly reduce operating
ranges.
For more information, see
page13
When installing, ensure without fail
that the camera branch and monitor
J-Y(St)Y
Camera branch max. 150 m/492 ft Monitor branch max. 150 m/492 ft
6

branch are not laid in the same
cable. Forward and return lines to a
bus telephone with video must not
be laid in the same cable.
Otherwise, picture disturbance may
result.
If installation from one bus tele-
phone to the next bus telephone is
not possible, bus distributors must
be used. In this case, attenuation of
the conductor material and bus dis-
tributors must be additionally taken
into consideration.
Terminating resistor
Transmission of signals within Siedle
In-Home: Video takes place using
high-frequency technology.
In order to avoid disturbance on the
bus cores, the end of each monitor
branch must terminated with an RC
element. The RC element comprises
a resistor with 100Ohm and a
capacitor with 1nF. In its as-deliv-
ered status, each bus telephone with
colour monitor has a small tted
circuit board with this terminating
resistor at output terminals TaM/
TbM.
7

4 Conguration, conductor lengths
Single line system with bus distributor
Conductor length with bus
distributor
If the use of bus distributors is nec-
essary for installation, in addition to
the maximum range, attenuation of
the bus distributors and conductor
material must be additionally taken
into account.
The following information relating
to conductor lengths refers to one
camera branch and one monitor
branch. If several branches are
installed within a line, the informa-
tion is applicable to each branch.
Whichever value (attenuation or
conductor length) is reached rst is
applicable as a specication of the
admissible value.
Conductor length
Conductor material J-Y(St)Y cable
with 0.8mm diameter:
• max. 150m from the bus video
line rectier to the most distant user
in the monitor branch
• max. 150m from the bus video
line rectier to the most distant user
in the camera branch
• max. 45 dB attenuation from the
most distant user in the camera
branch to the most distant user in
the monitor branch
With a core diameter of 0.6mm,
the range is halved.
Network cable
Diameter Conductor
length
0,405mm AWG26 40m
0,511mm AWG24 60m
0,644mm AWG22 100m
The maximum admissible attenua-
tion is 45dB within a line. General
rule for J-Y(St)Y cable material:
• 10m conductor length corre-
sponds to 2dB attenuation!
Within the line, the maximum length
of the conductor material must not
exceed 1,500m.
If the maximum admissible atten-
uation of 45dB is exceeded, the
bus video line rectier accessory
ZBVNG650-… must be used in the
BVNG650-… to compensate for
this loss.
Signal transmission
Only signals from the In-Home bus
may be transmitted over the laid
conductor material. No additional
transmissions, for example PBX
extensions of a telephone system, S0
Bus (ISDN) or data lines of an alarm
system in the same cable.
The camera branch and monitor
branch must be laid separately and
must not be located in the same
cable. This can result in disturbance
to the picture composition.
Terminating resistor
Transmission of signals within Siedle
In-Home: Video takes place using
high-frequency technology.
In order to avoid disturbance on the
bus cores, the end of each monitor
branch must terminated with an RC
element. The RC element comprises
a resistor with 100Ohm and a
capacitor with 1nF. In its as-deliv-
ered status, each bus telephone with
colour monitor has a small tted
circuit board with this terminating
resistor at output terminals TaM/
TbM.
J-Y(St)Y
Camera branch 1 max. 150 m/492 ft Monitor branch 1 max. 150 m/492 ft Camera branch 2 max. 150 m/492 ft Monitor branch 2 max. 150 m/492 ft
Total attenuation max. 45 dB
8

J-Y(St)Y
Camera branch 1 max. 150 m/492 ft Monitor branch 1 max. 150 m/492 ft
Attenuation max. 45 dB Attenuation max. 55 dB
Camera branch 2 max. 150 m/492 ft Monitor branch 2 max. 150 m/492 ft
Single line system with bus distributor and ZBVNG650-…
Conductor length with bus dis-
tributor and ZBVNG650-…
The ZBVNG650-… accessory ampli-
es the video signal, so permitting
greater attenuation in the camera
branch and monitor branch. To do
this, the inserted jumper card in
the BVNG650-… is removed and
the ZBVNG650-… inserted in the
same slot.
The following information relating
to conductor lengths refers to one
camera branch and one monitor
branch. If several branches are
installed within a line, the informa-
tion is applicable to each branch.
Whichever value (attenuation or
conductor length) is reached rst is
applicable as a specication of the
admissible value.
The limiting values must be adhered
to for each of the branches.
Conductor length
Conductor material J-Y(St)Y cable
with 0.8mm diameter:
• max. 150m from the bus video
line rectier to the most distant user
in the monitor branch
• max. 150m from the bus video
line rectier to the most distant user
in the camera branch
• max. 45 dB attenuation from the
bus video line rectier to the most
distant user in the camera branch
• max. 55 dB attenuation from the
bus video line rectier to the most
distant user in the monitor branch
With a core diameter of 0.6mm,
the range is halved.
Network cable
Diameter Conductor
length
0,405mm AWG26 40m
0,511mm AWG24 60m
0,644mm AWG22 100m
Within the line, the maximum length
of the conductor material must not
exceed 1,500m.
9

J-Y(St)Y
Monitor branch max.
150
m/492 ft
Camera branch max. 150 m/492 ft
Line 1 Line 2 Line 15
Camera branch 1 max. 150 m/492 ft Monitor branch 1 max. 150 m/492 ft
Camera branch max. 150 m/492 ft Monitor branch max. 150 m/492 ft
Attenuation max. 45 dB Attenuation max. 55 dB
Camera branch 2 max. 150 m/492 ft Monitor branch 2 max. 150 m/492 ft
Most distant BVNG-BVNG (SaV/SbV) connection max. 150 m/492 ft
4 Conguration, conductor lengths
Multiple line system
10

Conguration of the multiple
line system
A multiple line system comprises
individual lines which are linked
together by two cores. The lines
are connected at the bus video line
rectier using terminals SaV and SbV.
In multiple line systems, speech and
video connections are possible from
one line to another. To generate a
multiple line system, the bus line
rectier accessory ZBVG650-… is
required in one of the bus video line
rectiers.
In each bus video line rectier,
the bus video line rectier acces-
sory ZBVNG650-… is required.
Differentiation between
line 1 and line 2 …
The lines are consecutively num-
bered using the address switch
“Adr.” at the bus video line rectier
BVNG650-… Up to 15lines can be
linked via the SaV and SbV cores.
The bus video line rectier is
connected via the bus distributor
BVVU650-…
At the bus video line rectier, a
bus line rectier can be connected
directly via the cores Sa and Sb in
order to link a line with In-Home:
Audio. During installation, ensure
that each line is laid in a separate
cable.
Functions applicable across indi-
vidual lines
Door calls, selective door dialling and
switching and control functions can
also be used across individual lines.
Internal speech communication and
call forwarding between users is only
possible within a line.
Conductor length between the
lines
The admissible conductor lengths
within a line are identical to those
in a single line system. In addition,
the admissible conductor length
between the bus video line rectiers
must be taken into account.
This must be no more than 150m
(45dB) between the most distant
bus video line rectiers (using
J-Y(St)Y cable with 0.8mm diam-
eter).
As only data exchange takes place
between the bus video line rectiers,
i.e. no current ows, it is possible
to achieve a range of up to 300m
using a CAT installation cable (e.g.
CAT5).
In a multiple line system comprising
only 2lines, connection between
the two bus video line rectiers is
possible without bus distributor
BVVU650-…
The maximum admissible lengths
within a line and the attenuation
values continue to be valid.
When installing, ensure without fail
that the camera branch and monitor
branch are not laid in the same
cable. Forward and return lines to a
bus telephone with video must not
be laid in the same cable.
Otherwise, picture disturbance may
result.
11

BAA
0 dB
BVVU
1 dB
BVVU
1 dB
BVVU
1 dB
12 dB
7 m
5 m
5 m
5 m
12 dB
12 dB
25 m 11 m4m4m 12 m
Apartment 1
Apartment 2
Apartment 3
Apartment 4
4 Conguration, conductor lengths
Example to determine the attenuation
Example to determine the atten-
uation with bus distributor
The system is installed using J-Y(St)Y
cable 0.8mm diameter. This means
that 10m of conductor length have
an attenuation of 2dB. Apartment4
is decoupled using a bus audio
decoupler BAA650-…, apartment1
- apartment3 are connected via bus
video distributor BVVU650-…
Attenuation in the camera
branch
Conductor length between the door
station and the sub-distributor 25m.
25m=5dB
Attenuation in the monitor
branch to apartment3
Conductor length of the installation
cable. All values added, from the
bus video line rectier to the bus
telephone:
11m+4m+5m=20m
20m conductor length corresponds
to 4dB attenuation
Attenuation of the bus distributor
BVVU650-…=12dB
Total value:
12dB distributor + 4dB conductor
= 16dB
This means that apartment3
has a total attenuation from the
camera to the bus telephone of
16dB+5dB=21dB
Attenuation in the monitor
branch to apartment1
Conductor length of the installation
cable. All values added, from the
bus video line rectier to the bus
telephone:
11m + 4m + 4m + 12m + 7m
= 38m
38m of conductor material add up
to 7.6dB
Attenuation of all bus distributors:
1dB + 1dB + 12dB =14dB
Total value:
14dB distributor + 7.6dB conductor
=21.6dB
Apartment 1 has a total attenuation
from the camera to the bus tele-
phone of 21.6dB + 5dB =26.6dB
The maximum value with this
example would be 26.6dB from
the most distant video door station
to the most distant bus telephone,
the maximum admissible would be
45dB.
With greater attenuation over 45dB,
accessory ZBVNG650-… can be
used to increase attenuation in the
camera branch to 45dB and in the
monitor branch to 55dB.
On the following double page, the
precise function of the bus distrib-
utor is explained in detail.
12

Installation with YR
Installation with J-Y(St)Y, increased range
Camera branch
max. 150 m/492 ft/45 dB
Monitor branch 1
max. 200 m/656 ft/55 dB Camera branch
max. 100 m/328 ft/45 dB
Monitor branch
max. 100 m/328 ft/45 dB
Installation with YR
Systems can also be congured with
using conductor material YR with a
core diameter of 0.8mm. However,
this will signicantly reduce oper-
ating ranges. Even if parts of the
system are congured using YR
0.8mm core diameter conductors,
the reduced range will still come
into effect.
Conductor material YR cable with
0.8mm core diameter:
• max.100m from the bus video
line rectier to the most distant user
in the monitor branch
• max.100m from the bus video
line rectier to the most distant user
in the camera branch
If it is necessary to use bus distrib-
utors within the installation, the
attenuation of the conductor mate-
rial and the bus distributor must be
taken into consideration.
With a core diameter of 0.6mm, the
range is halved.
Installation is also possible in a
multiple line system with 0.8mm
conductor material.
Installation with J-Y(St)Y,
increased range
The ZBVNG650-… must be plugged
into the BVNG650-…!
When using cable material J-Y(St)Y
with 0.8mm, it is possible to
increase the distance from the
bus video line rectier to the bus
telephones with colour monitor. In
this case, each bus telephone with
colour monitor must be provided
with an additional power supply
(e.g. video line rectier VNG602-…).
At the bus video line rectier
BVNG650-… the operating mode
switch must be set to 2.
Conductor material J-Y(St)Y cable
with 0.8mm diameter:
• max.200m from the bus video
line rectier to the most distant user
in the monitor branch.
In a multiple line system this
facility can be used to increase the
range in every line.
In the case of a parallel call to sev-
eral bus telephones with video, the
admissible conductor length of the
power supply must be noted.
For more information, see
page128
Within the line, the maximum length
of the conductor material must not
exceed 1,500m.
Installation is also possible in a
multiple line system with 0.8mm
conductor material.
13

4 Conguration, conductor lengths
Bus distributor for ush mounted junction boxes
Camera branch Monitor branch
Distribution
Camera branch:
No bus distributor required with a door
station.
Monitor branch:
No bus distributor required when looping
through from bus telephone to bus telephone.
The integrated bus distributor in the bus tele-
phones is used.
Attenuation:
No attenuation to be considered.
BAA 650-... BAA 650-...
Distribution
BAA650-… in the camera branch:
Connection of audio users (e.g. BTLM650-…
or BTLE050-…) or users for switching and
control functions.
BAA650-… in the monitor branch:
Connection of audio users (AIB150-…, BTS/
BTC/BFC850-…, DCA650-…) or users for
switching and control functions.
Attenuation:
No attenuation to be taken into consideration
if decoupled.
BVVS 650-... BVVS 650-...
BVVS
BVVU
BVVUBVVU
*
Distribution
BVVS650-… in the camera branch:
More than one video door station in the
camera branch with “star shaped” conductor
routing.
BVVS650-… in the monitor branch:
Within the In-Home bus: Video more than one
side circuit is required.
Attenuation:
The attenuation from BVVS650-…,
BVVU650-… and the conductor length must
be taken into consideration.
* The device must not be a table-top device,
as there is an open cable end in the case of a
device that is not plugged in.
BVVU 650-... BVVU 650-...
Distribution
BVVU650-… in the camera branch:
More than one video door station in the
camera branch with “loop through” con-
ductor routing.
BVVU650-… in the monitor branch:
Connection of a bus telephone with monitor
to a side circuit with “looped through” con-
ductor routing.
Attenuation:
The attenuation from BVVU650-… and the
conductor length must be taken into consid-
eration.
14

BAA 650-...
Attenuation
Audio user
Video user Direction
Line
rectifier
BAA 650-...
Attenuation
Direction
Line
rectifier
Audio user
Video user
BVVS 650-...
Attenuation
Direction
Line
rectifier
Video user
Video user
BVVS 650-...
Attenuation
Direction
Line
rectifier
Video user
Video user
BVVU 650-...
Attenuation
Direction
Line
rectifier
Video user
Video user
BVVU 650-...
Attenuation
Direction
Line
rectifier
Video user
Video user
BAA650-… in the
camera branch
Connection of a door station
without video (e.g. BTLM650-…/
BTLE050-…) or switching and con-
trol devices (BSE/BSM/BEM650-…)
at the Siedle In-Home bus: Video.
For more information, see
page68
BVVS650-… in the
camera branch
When more than one video door
station is operated within a camera
branch.
For more information, see
page56
BVVU650-… in the
camera branch
When more than one video door
station is operated within a line.
BAA650-… in the
monitor branch
Connection of pure audio users
(AIB150-…, BTS/BTC/BFC850-…,
DCA650-…) or users for switching
and control functions (BSE/BSM/
BEM650-…) within an Siedle
In-Home bus: Video.
For more information, see
page64
BVVS650-… in the
monitor branch
If more than one rising main/side
circuit is required within In-Home
bus: Video. At the outputs, further
distribution must take place via
BVVU650-… or BAA650-… Direct
connection of devices is only per-
mitted for permanent installations.
BVVU650-… in the
monitor branch
Decoupling a video user from a side
circuit into the apartment.
For more information, see
page46
Attenuation values
15

BVVS 1
BVVS 2
2
1
Distribution
BVVS 1
BVVS 2
2
1
*
*
*
*
Distribution BVVS652-… in the camera branch:
More than one video door station in the
camera branch with “star shaped” con-
ductor routing.
BVVS652-… in the monitor branch:
Within the In-Home bus: Video more
than one side circuit is required.
Attenuation:
The attenuation from BVVS652-… and
the conductor length must be taken into
consideration.
* The device must not be a table-top
device, as there is an open cable end in
the case of a device that is not plugged
in.
BVVU 652-…
Distribution
BVVU 652-…
Distribution
BVVU652-… in the camera branch:
More than one video door station in the
camera branch with “star shaped” con-
ductor routing.
BVVU652-… in the monitor branch:
Connection of a bus telephone with
monitor to a side circuit with “star
shaped” conductor routing.
Attenuation:
The attenuation from BVVU652-… and
the conductor length must be taken into
consideration.
BAVU 652-…
Distribution
BAVU 652-…
Distribution
BAVU652-… in the camera branch:
More than one video door station in the
camera branch with “star shaped” con-
ductor routing.
Connection of audio users (e.g.
BTLM650-… or BTLE050-…) or users
for switching and control functions.
BAVU652-… in the monitor branch:
Connection of a bus telephone with
monitor to a side circuit with “star
shaped” conductor routing.
Connection of audio users (AIB150-…,
BTS/BTC/BFC850-…, DCA650-…) or
users for switching and control functions.
Attenuation:
The attenuation from BAVU652-… and
the conductor length must be taken into
consideration.
4 Conguration, conductor lengths
Bus distributor for top hat rail mounting
16

BVVS 652-…
BVVS 2
BVVS 1
TaA
TbA
TaA
TbA
TaE
TbE
TaA
TbA
TaA
TbA
TaE
TbE
3 dB
3 dB
Attenuation
Video user
Video user
Video user
Video user
Direction
Line
rectifier
Direction
Line
rectifier
BVVU 652-…
13 dB
2 dB
12 dB
TaA
TbA
TaA
TbA
TaE
TbE
TaD
TbD
1
2
Video user
Video user
Direction
Line
rectifier
Video user
Attenuation
BAVU 652-…
Ta
Tb
TaE
TbE
TaD
TbD
TaA
TbA
12 dB
1 dB
Attenuation
Audio user
Direction
Line
rectifier
Video user
Video user
BAVU 652-…
Ta
Tb
TaD
TbD
TaE
TbE
TaA
TbA
12 dB
1 dB
Attenuation
Audio user
Direction
Line
rectifier
Video user
Video user
BVVS 652-…
BVVS 2
BVVS 1
TaE
TbE
TaA
TbA
TaA
TbA
TaE
TbE
TaA
TbA
TaA
TbA
3 dB
3 dB
Attenuation
Video user
Video user
Direction
Line
rectifier
Video user
Video user
Direction
Line
rectifier
BVVU 652-…
13 dB
2 dB
12 dB
TaA
TbA
TaA
TbA
TaD
TbD
TaE
TbE
1
2
Video user
Video user
Direction
Line
rectifier
Video user
Attenuation
BVVS652-… in the camera
branch
When more than one video door
station is operated within a camera
branch.
BVVU652-… in the camera
branch
When more than one video door
station is operated within a camera
branch.
BAVU652-… in the camera
branch
Connection of audio users and for
coupling and decoupling video users
in a device.
BAVU652-… in the monitor
branch
Connection of audio users and for
coupling and decoupling video users
in a device.
BVVS652-… in the monitor
branch
Within the In-Home bus: Video more
than one side circuit is required.
BVVU652-… in the monitor
branch
Connection of a bus telephone with
monitor to a side circuit with “star
shaped” conductor routing.
Attenuation values
17

5 In-Home: Video users
Door loudspeakers, call buttons
BTLM 650-04
Bus door loudspeaker module for
In-Home bus. Loudspeaker and
microphone integrated, illuminated
light button, integrated door release
contact (DR) Acoustic acknowl-
edgement on pressing a button,
can be activated if required with
the BPS650-… contact load max.
15VAC, 30VDC, 2A, switching
time DR xed at 3seconds. Acoustic
feedback when actuating the call
buttons.
BTM650-01 to -04
Bus call button modules for In-Home
bus 1–4 call buttons, integrated LED
lighting. Connection by means of
ribbon cable to the bus door loud-
speaker. Supply to the LED lighting
via terminal b and c with 12VAC,
current consumption 20mA per bus
call button module BTM650-…
DRM 612-01
Display call module as an input
device with 4-line display for placing
door calls.
Indication of names in the display in
alphabetical order.
The DRM612-… can also be used in
combination with the COM611-…
in order to display the input via the
DRM612-…
BRMA 050-01
Bus call button matrix for the con-
nection of existing call buttons to
the custom-t door loudspeaker
BTLE050-…/ATLE670-…
Max. 160 call buttons can be con-
nected. However, a bus call button
matrix BRMA050-… is required
for each started group of 12call
buttons.
COM 611-02
Code lock module as an input unit
for the placement of codes for con-
trol functions in conjunction with
the Siedle Vario bus.
BTLE 051-04
Bus custom-t door loudspeaker
for Siedle In-Home bus for on-site
intercom compartments, door con-
structions, letterboxes etc. Incl. bus
call button matrix BRMA050-01 for
direct connection of 12 of the cus-
tomer’s own on site call buttons.
OK
123
45 6
F 0 C
789
18

Door stations
SiedleClassic
Door station in the Classic design
line, with stainless steel front,
door loudspeaker, call buttons and
Bus camera. LED-illuminated bell
buttons, 5mA, 12VAC each per
button.
SiedleSteel
Door station in the Steel design
line, with stainless steel front,
door loudspeaker, call buttons and
Bus camera. LED-illuminated bell
buttons, 3mA, 12VAC each per
button.
19

5 In-Home: Video users
Bus and external cameras
BCMC 650-03
Bus camera 80 for Siedle Vario with
automatic day/night switchover (True
Day/Night) and integrated infrared
lighting. Horizontal/vertical pick-up
angle: appr. 80°/60°
Colour system: PAL
Image pick-up: CMOSsensor1/3"
756x504Pixel
Resolution: 550TVlines
Lens: 2.9mm
Mechanical adjustment range:
30°horizontal/vertical
2-step heating: 12VAC
max.130mA
Protection system: IP54, IK10
Ambient temperature:
–20°Cto+55°C
Height of structure (mm): 32
Dimensions (mm) WxHxD:
99x99x58
BCM 653-01
Bus camera 130 for Siedle Vario with
automatic day/night switchover (True
Day/Night) and integrated infrared
lighting. Horizontal/vertical pick-up
angle: appr. 130°/100°
Colour system: PAL
Image pick-up: CMOSsensor1/3"
756x504Pixel
Resolution: 550TVlines
Lens: 2.1mm
2-step heating: 12VAC
max.130mA
Protection system: IP54, IK10
Ambient temperature:
–20°Cto+55°C
Height of structure (mm): 15
Dimensions (mm) WxHxD:
99x99x41
BCM 651-0
Bus camera 80 for Siedle Vario with
automatic day/night switchover (True
Day/Night) and integrated infrared
lighting. Horizontal/vertical pick-up
angle: appr. 82°/64°
Colour system: PAL
Image pick-up: CMOSsensor1/3"
756x504Pixel
Resolution: 550TVlines
Lens: 2.9mm
2-step heating: 12VAC
max.130mA
Protection system: IP54, IK10
Ambient temperature:
–20°Cto+55°C
Height of structure (mm): 15
Dimensions (mm) WxHxD:
99x99x41
20