Stanley Fatmax FMHT77446 User manual

E
GB
NL
GR
I
FIN
HU
BG
LV
D
DK
CZ
E
NO
SK
RO
LT
F
SE
RU
PT
PL
SI
EE
TR
HR
FMHT77446, FMHT77449, FMHT77447, FMHT77448
Self-Leveling Rotary Laser
Red Beam: RL 600, RL 600L, RL 700L
Green Beam: RL 750L-G
www.2helpU.com
Please read these instructions before operating the product.

2
A
B

3
1. 2.
1.
2.
RL 600
RL 600L
RL 700L
RL 750L-G
E
C
D
1.
2.

4
1.
2.
AA
AA
1.
2.
+_+_
1.
2.
F
G

5
H
I

6
J
K L

7
N
M

8
+X –X
+Y
20 m 20 m
20 m 20 m
D1
D2
D0
D2
D1
O

GB
9
Contents
• User Safety
• Keypad and LEDs
• Battery Safety
• Batteries and Power
• Using the Accessories
• Turning the Laser On/Off
• Performing Accuracy Check and Calibration
• Operating the Laser
• Using the Remote Control
• Using the Detector
• Maintenance and Care
•
User Safety
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in property damage.
If you have any questions or comments about this or any
Stanley tool, go to http://www.2helpU.com.
WARNING:
Read and understand all instructions . Failure to follow
the warnings and instructions in this manual may result in
serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING:
Carefully read the Safety Instructions and Product
Manual before using this product. The person responsible
for the instrument must ensure that all users understand
and adhere to these instructions.
CAUTION:
While the laser tool is in operation, be careful not to
expose your eyes to the emitting laser beam. Exposure to
a laser beam for an extended time may be hazardous to
your eyes.
CAUTION:
Glasses are supplied in some of the laser tool kits.
are ONLY used to enhance the visibility of the beam in
brighter environments or at greater distances from laser
source.
SAVE THESE INSTRUCTIONS
WARNING:
The following labels are placed on the laser tools to
inform you of the laser class for your convenience and
safety.
V
2
WARNING
Laser Radiation Exposure. Do not disassemble or modify
the laser level. There are no user serviceable parts
inside. Serious eye injury could result.

GB
10
• Do not operate the laser in explosive atmospheres, such as
may create sparks which may ignite the dust or fumes.
• Store an idle laser out of reach of children and other untrained
persons. Lasers are dangerous in the hands of untrained
users.
•
personnel may result in injury. To locate your nearest Stanley
service center go to http://www.2helpU.com.
• Do not use optical tools such as a telescope or transit to view
the laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause anyone
to intentionally or unintentionally stare into the laser beam.
Serious eye injury could result.
•
injury could result.
• Store an idle laser out of reach of children and other untrained
persons. Lasers are dangerous in the hands of untrained
users.
• Turn the laser off when it is not in use. Leaving the laser on
increases the risk of staring into the laser beam.
• Do not modify the laser in any way. Modifying the tool may
result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow children to
operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. If labels are
removed, the user or others may inadvertently expose
themselves to radiation.
• Position the laser securely on a level surface. If the laser falls,
damage to the laser or serious injury could result.
Personal Safety
• Stay alert, watch what you are doing, and use common sense
when operating the laser. Do not use the laser when you are
A moment of inattention while operating the laser may result
in serious personal injury.
•
protection. Depending on the work conditions, wearing
shoes, hard hat, and hearing protection will reduce personal
injury.
Tool Use and Care
• Follow instructions in the Maintenance and Care section of
this manual. Use of unauthorized parts or failure to follow
Maintenance and Care instructions may create a risk of
electric shock or injury.
Keypad and LEDs
Keypad
To reference keypad and LED display, see Figure
(RL 600 and RL 600L) or Figure (RL 700L and
RL 750L-G).
Power ON/OFF Key
Tilt Warning ON/OFF Key
Scan Mode Key
Manual Slope Mode Key
Rotation Speed Key
Up Arrow Key (counterclockwise)
Down Arrow Key (clockwise)
LEDs
Power LED
•
•
•
•
•
•
•

GB
11
Manual LED
•
Power LED & Manual LED
•
Tilt Warning LED
•
•
X/Y Select LED
•
•
•
•
•
•
Battery Safety
The RL 600 is powered by alkaline batteries.
The RL 600L, RL 700L, and RL 750L-G are powered by
a Li-ion battery.
WARNING:
To reduce the risk of injury, the user must read the
product User Manual, the Laser Safety Manual, and the
Battery Safety Manual.
WARNING:
The battery and charging/power adapter can be
damaged if damp. Always store and charge the tool in
a dry and covered place.
Always insert batteries correctly with regard to
polarity (+ and –), as marked on the battery and the
equipment. Do not mix old and new batteries.
Replace all batteries at the same time with new
batteries of the same brand and type.
WARNING:
Batteries can explode, or leak, and can cause injury
. To reduce this risk:
• Carefully follow all instructions and warnings on the battery
label and package.
• Do not mix battery chemistries.
•
• Keep batteries out of reach of children.
• Remove batteries if the device will not be used for several
months.
• Do not short battery terminals.
• Do not charge disposable batteries.
•
End of Life
DO NOT
ALWAYS
PLEASE RECYCLE
EC-Declaration of Conformity
Radio Equipment Directive
Stanley Fatmax Self-Leveling Rotary Laser
FMHT77446, FMHT77449, FMHT77447, FMHT77448
www.2helpU.com

GB
12
Batteries and Power
Battery Installation
Laser Tool Battery Installation
RL 600
See Figure
Remote Control Battery Installation
RL 600L, RL 700L, and RL 750L-G
See Figure
Detector Battery Installation
See Figure
WARNING:
markings for proper battery insertion. Batteries must be
of same type and capacity. Do not use a combination of
batteries with different capacities remaining.
Charging the Li-ion Battery
RL 600L, RL 700L, and RL 750L-G
See Figure
The
The
WARNING: Charge laser only with the power adaptor
supplied. Using any other type of charger may result in
damage and/or personal harm.
Operating with Charging/Power
Adapter
•
•
Using the Accessories
CAUTION: Do not leave the laser tool unattended on an
accessory without fully tightening the mounting screw.
Failing to do so may lead to the laser tool falling and
sustaining damage.
Mounting Bracket
RL 700L and RL 750L-G
See Figure
NOTE:
• It is best practice to support the laser tool with one hand when
placing or removing the laser tool from an accessory.
•
screw mount.
•
•
•

GB
13
•
•
•
Tripod Mount
See Figure
Target Card
See Figure
Laser Enhancement Glasses
See Figure
CAUTION:
These glasses are not ANSI approved safety glasses
and should not be used while operating other tools.
These glasses do not keep the laser beam from entering
your eyes.
CAUTION:
To reduce the risk of serious injury, never stare directly
into the laser beam with or without these glasses.
Turning the Laser On/Off

GB
14
Performing Accuracy Check
and Calibration
NOTE:
• The laser tool is sealed and calibrated at the factory to the
• It is recommended to perform a calibration check before use.
•
• The laser tool should be checked regularly to ensure its
accuracies, especially for precise layouts.
Horizontal Check
See Figure
1
2
1"
2
1 2
RL 600 & RL 600L
1 2
RL 700L & RL 750L-G
1 2
Horizontal Calibration
See Figure
The
0
1 2
NOTE:
0
1 2
If the laser tool can still not be calibrated after following
the Calibration procedure, send the laser tool into an
Authorized Service Center for repair.

GB
15
Operating the Laser
Correcting a Tilt Warning
(Not available in Manual Mode)
Turning the Tilt Warning Off
(Not available in Manual Mode)
Changing the Tilt Warning Default
Setting
Using Manual Mode
Using Manual Slope Mode
NOTE:

GB
16
NOTE:
NOTE:
Changing the Rotation Speed
600 300 150
Using Spot Mode
NOTE:
Using Scan Mode
RL 700L and RL 750L-G
(10°/45°/90°)
NOTE:
Using the Remote Control
RL 600L, RL 700L, and RL 750L-G
Using the Detector
Detector Keypad
Power ON/OFF Key
High/Low Accuracy Key
Speaker Volume Key

GB
17
Operating the Detector
(See Keypad and LCD Descriptions for indications during
operation)
Powering on the Detector
•
•
•
NOTE:
Illuminating the Detector LCD
•
NOTE:
Adjusting the Detector Accuracy
•
•
NOTE:
•
•
•
Adjusting the Detector Speaker Volume
•
•
Detector LCD Icons
Laser Detected -
Laser Detected -
Laser Detected -
Buzzer Volume -
Low Accuracy Setting
High Accuracy Setting
Detector Setup
(The Detector can be used in hand or with optional clamp
to mount the detector to a measuring rod, pole, or similar
object)
Mounting Clamp onto Detector
Mounting Clamp onto Level Staff, Pole, or
Similar Object

GB
18
Detecting Reference Level
NOTE:
NOTE:
Maintenance and Care
•
•
•
•
•

GB
19
Laser Tool

GB
20
Remote Control
Detector
20 h
Notes