Starkey Livio Behind-the-Ear Rechargeable User manual

PRODUCT GUIDE
Behind-the-Ear Rechargeable (BTE R)
With Earmold
Your new hearing aids offer Starkey’s most advanced
technology with supreme sound quality and features.
They are customizable to fit your unique hearing
needs, helping you to stay connected to the people
and things you love most.
Hearing Aid Parts
1. Hearing Aid
2. Earhook
3. Tubing
4. Microphone
5. Push Button User Control
6. Earmold
7. Charging Contacts
Insertion and Removal
To insert the hearing aid:
1. Grasp the tubing at the point where it enters
the earmold with your thumb and forefinger.
2. Tilt your hand slightly forward and gently insert
the tip of the earmold into your ear canal.
3. Rotate the earmold slightly backward into position.
4. Softly press the earmold into place with your fingertip.
5. Carefully place the hearing aid behind your ear
wrapping the earhook over the top of your ear.
To remove the hearing aid:
1. Pull the hearing aid forward to remove it from
behind your ear.
2. Grasp the tubing at the point where it enters
the earmold with your thumb and forefinger
and gently pull the earmold out of your ear canal.
3. Lightly pulling down on the earlobe may help
loosen the custom earmold as it is removed.
3
4
2
1
5
2
6
7
5
3
1
4
How-to Video

Charging Your Hearing Aids
Your hearing aid uses a rechargeable battery as its power source.
To charge the battery:
1. Plug your charger into an outlet.
2. Place your hearing aids in the charging ports
with the earmolds resting inside the case.
3. Your hearing aids will turn off automatically and begin to charge.
• The front of the charger is equipped with two LED indicators
to provide information about hearing aid charging. The front
LED indicators will glow green to indicate successful charging.
• When the hearing aids are fully charged (approx 3.5 hrs charge time),
the front LED indicators will be solid green.
• Your hearing aids will automatically power on when removed from the charger.
Battery Indicator
You will hear an indicator
through your hearing aid
when battery voltage
is low and the battery
needs charging.
Behind-the-Ear Rechargeable (BTE R) PRODUCT GUIDE
How-to Video
5
6
4
3
1
2
Hearing Aid Charger Parts
1. Desiccant Puck Holder
2. Cleaning Brush
3. Charging Ports
4. Hearing Aid Charging LEDs
5. On-board Battery LEDs
6. Power Cord Port
Desiccant Puck
The desiccant puck will be effective for 3–6 months depending on moisture in the hearing
aids and humidity. The color will fade from blue to white, indicating a need for replacement.
On-board Battery
• The back of the charger is equipped with four LED indicators to provide information about
the status of the on-board battery. The on-board battery allows charging of the hearing
aids up to three times while the charger is away from a power source.
• When away from a power source, the back LED indicators will be solid green indicating
the amount of charge available for the on-board battery. The LED indicators will turn off
after 10 seconds to preserve power.

Behind-the-Ear Rechargeable (BTE R) PRODUCT GUIDE
©2021 Starkey. All Rights Reserved. 4/21 FLYR3837-00-EE-GS
3
2
1
4
For more help, visit Starkey.com/Support
On-board Battery (Continued)
• One blinking LED on the back of the charger indicates that the on-board battery is low
and the charger should be connected to a power source.
• When plugged into a power source, the back LED indicators will glow green to indicate
successful on-board battery charging.
Hearing Aid Care
Cleaning Your Hearing Aids
• Use the cleaning brush or soft cloth to clean debris from around the user control,
microphone, charging contacts, tubing and earmold.
• Never use water, solvents, cleaning fluids or oil to clean your hearing aid.
Cleaning the Tubing and Earmold
1. Separate the earmold from the hearing aid by
gently pulling the tubing away from the earhook.
2. Connect an earmold air blower to the tubing
and gently squeeze the bulb to push air through
the tubing. Any moisture or debris should come
out the end of the earmold.
3. Use a soft, damp cloth or a cleaning brush
to clean debris from the earmold.
4. Ensure the earmold is dry, then slide
the earmold tubing onto the earhook.
The Starkey logo and Starkey are registered trademarks of Starkey Laboratories, Inc.