Stern Pinball WRESTLEMANIA WWE PRO User manual

WWE PRO
WWE PRO #500-55G1-00
MANUAL #780-50G1-00
PINBALL MACHINE
SERVICE AND OPERATION MANUAL
Games congured forNorth America operate on 60 cycle
electricity only. These games will not operate in countries
with 50 cycle electricity (Europe UK, Australia).

2 WWE PRO MANUAL #780-50G1-00
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
GAME SOFTWARE UPDATE
Keep your game up to date! The latest Stern game software
is always available at www.sternpinball.com. Stern games
show the current version number when starting up.
Pinball Game Software Update Instructions
1. Obtain a blank standard FAT32-formatted USB ash
drive (SPI Part Number 970-0128-00).
2. Download the latest game software update for your
game from www.sternpinball.com.
3. Copy the game software update le, which ends in
.BIN, to the root (primary) directory of the ash drive.
4. Use backbox power switch to turn o the game.
5. Plug the USB ash drive into the CPU Node USB
connector, CN20 or CN21.
6. Turn on the game. The game will discover and auto-
matically begin the software update. DO NOT TURN
OFF POWER DURING THE UPDATE.
7. When the display indicates “Update Complete”, turn
o the game.
8. Remove USB ash drive from the CPU node.
9. Turn game on to complete the update and play
pinball!
Detailed instructions and troubleshooting tips are available
at www.sternpinball.com and authorized Stern distributors.
TABLE OF CONTENTS
1. Setup and Moving ..................................... 3
1.1 First-time Setup ........................................................ 3
1.2 Transporting the Game ............................................. 6
2. SPIKE Pinball Platform Overview ............ 7
1.3 SPIKE System and Node Guide................................ 7
1.4 SPIKE System Overview ........................................... 7
1.5 Node Bus Cabling ..................................................... 7
1.6 System Power ........................................................... 7
1.7 SPIKE Node Addresses ............................................ 7
1.8 SPIKE Node Programming........................................8
1.9 SPIKE System Terminology ...................................... 8
1.10 System Protections ................................................... 8
3. Light, Switch, and Driver Reference........ 9
3.1 Driver Reference ..................................................... 10
3.2 Lighting Reference .................................................. 11
3.3 Switch Reference .................................................... 15
4. Electronic Pinouts and Schematics....... 19
4.1 SPIKE CPU Node 0 ................................................. 19
4.2 Cabinet Node 1 ....................................................... 21
4.3 Lower Playeld 48V 8-Driver Node 8 ...................... 23
4.4 Lower Playeld Serial LED (Node 8a) ..................... 25
4.5 Mid Playeld 4-driver 48V Node 9 .......................... 26
4.6 Trough Serial Opto Receiver ................................... 28
4.7 Trough Serial Opto Transmitter ............................... 28
4.8 Upper Mini Playeld 4-Driver 48V Node 10 ............ 29
4.9 Upper Playeld Lighting and Switch Node 11 ........ 31
4.10 Upper Mini PLayeld LED Board ............................ 32
4.11 Opto Amplier Wiring .............................................. 34
4.13 Backbox Interconnect Block Diagram .................... 34
4.12 Main Power Supply ................................................. 34
4.14 Power Distribution Board ........................................ 35
4.15 Power Plug Wiring................................................... 35
5. Parts Reference....................................... 36
5.1 Playeld Top Parts .................................................. 36
5.2 Playeld Bottom Parts ............................................ 37
5.3 Playeld Rubber Parts ............................................ 38
5.4 Rubber Size Chart ................................................... 39
5.5 Playeld Nuts .......................................................... 39
5.6 Lighting Components.............................................. 39
5.7 Screws and Fin Shanks .......................................... 39
5.8 Playeld Spacers .................................................... 40
5.9 Playeld Posts ........................................................40
5.10 Backbox Parts......................................................... 41
5.11 Speaker Panel Parts ...............................................42
5.12 Cabinet Decals ........................................................ 42
5.13 Cabinet Parts .......................................................... 43
5.14 Auto Launch Assembly ........................................... 44
5.15 Ball Trough Assembly.............................................. 44
5.16 3-Bank Drop Target Assembly ................................ 45
5.17 Pop Bumper Assembly ........................................... 46
5.18 Flipper Assembly, Left ............................................. 47
5.19 Flipper Assembly, Right .......................................... 47
5.20 Left WWE Ramp Assembly ..................................... 48
5.21 Left Ring Exit Wire Ramp Pro Assembly ................. 48
5.22 Right WWE Ramp Assembly ................................... 48
5.23 Back Panel Assembly, WWE PRO .......................... 49
5.24 WWE Top Lanes Assembly ..................................... 50
5.25 WWE Left “SLAMMER” Flipper Plastic Assembly . . 50
5.26 WWE Right “SLAMMER” Flipper Plastic Assembly 50
5.27 WWE Top Lanes Lights and Switches .................... 51
5.28 WWE Bottom Orbit ASSY ....................................... 51
5.29 WWE Top Lanes Posts ASSY ................................. 52
5.30 WWE Pop Bumper Flasher Assembly ..................... 52
5.31 WWE Mini Playeld Assembly ................................ 53
5.32 WWE Ladder Light and Switch Assembly .............. 54
5.33 Vertical Upkicker Assy Angled Tip .......................... 54
5.34 WWE Ladder Exit Switch Assembly ....................... 54
5.35 WWE Pop Bumper Playeld Assembly ................... 55
5.36 WWE Ball Guide 04 Assembly ............................... 55
5.37 WWE Ball Guide 02 Assembly ................................ 55
5.38 WWE Ladder Assembly .......................................... 56
5.39 Shooter Lane Gate Assembly ................................. 56
5.40 WWE Stand Up Target 3-Bank Assembly ............... 56
5.41 Ring Exit Switch Assembly ..................................... 56
5.42 Sling shot AssemblIES ............................................ 57
5.43 Electric Gate, Rail Mount ........................................ 57
6. Warranty................................................... 58
6.1 Warnings, Compliance, and Legal Notices ............. 58
7. Specications .......................................... 59
7.1 Game Dimensions ................................................... 59
02/12/15

WWE PRO MANUAL #780-50G1-00 3
SETUP AND MOVING
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
1. SETUP AND MOVING
1.1 FIRST-TIME SETUP
CAUTION
AT LEAST TWO (2) PEOPLE ARE RE-
QUIRED TO MOVE AND MANEUVER
THE GAME. USE PROPER MOVING
EQUIPMENT AND EXTREME CARE
WHILE HANDLING. STERN PINBALL
MACHINES WEIGH OVER 250LBS
BOXED.
1. Locate the side labeled “TRUCK THIS
SIDE ONLY”. The bottom of the game
faces this side.
2. Open the top box aps by pulling
hard in an upward motion on each
ap. If the aps are taped, cut the
tape rst, taking care to avoid the box
staples.
3. Remove the four (4) foam pieces
and two (2) narrow box tubes which
contain the four (4) identical legs with
levelers.
4. DO NOT CUT STRAPPING YET.
Keep backbox secured in the down
position.
5. With the utility knife, carefully cut
down the left and right corners of the
box.
6. Let the face fall forward and remove
the entire side by carefully cutting the
bottom.
7. With the game still in its folded posi-
tion, use a ⅝” wrench to loosen and
remove the 2 leg bolts on each side
of the front cabinet. Ensure the leg
levelers are screwed all the way in to
the legs.
2
2
55
8. Install front legs using the bolts
removed from Step 5. Secure
tightly.
9. Use a helper to carefully set the
game down on the front legs.
7
7
10. Set aside the open box.
11. With the ⅝” socket wrench, loosen
and remove the 2 leg bolts on each
side of the rear cabinet, 4 total.
12. Using supports or two people, prop
the rear of the cabinet up.
13. Ensure the rear leg levelers are
screwed all the way into the legs.
14. Install rear legs using the 4 bolts
removed from step 11.
15. Cut nylon strapping and remove pro-
tective strap corner guards
1
9
8
11
14
15
14
11
8
TOOLS REQUIRED
• 5/8” Socket Wrench
• Utility Knife
• Snips
• A Helper
Your brand new Stern Pinball Machine is
carefully packed for safety and security.
For your safety, exercise caution and use
the correct tools and sucient help when
setting up your new game.
6
02/12/15

4 WWE PRO MANUAL #780-50G1-00
SETUP AND MOVING
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
16. Locate the factory keys, either on the
shooter rod or taped to the playeld
glass.
17. Using the snips, cut the tie-wrap
securing the keys if required. One
set of keys is for the front coin door,
the other set of keys is for accessing
components in the backbox
18. Open the front coin door.
21. Store the backbox keys, if desired,
on the metal hook located in the coin
door.
22. Locate and remove the pinballs,
plumb bob, and backbox bolts from
the cash box.
23. Replace the cash box lid and retaining
clip for future use.
24. Locate the two (2) backbox bolts in
the cash box.
25. Carefully raise backbox to upright
position while ensuring that cables are
not pinched.
26. Use the ⅝” wrench to Install the
two (2) backbox bolts to secure the
backbox as indicated on the back of
the cabinet.
19. Reach into the game and remove the
retaining clip at the rear of the cash
box.
20. Remove the cash box lid by sliding it
toward you.
19
21
17
25
26
27. Reach inside the cabinet and lift the
two latches toward the back of the
game. vw
28. Remove the front top molding.
27
29. Remove the playeld glass by sliding
it toward you and carefully place it in
a safe location.
Remove all playeld shipping tie
downs, shipping blocks, and packing
foam, and follow any game-specic
unpacking instructions included in the
playeld, if present.
CAUTION
PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH TEMPERED GLASS. TEMPERED
GLASS IS SENSITIVE TO EXTREME TEMPERATURE SHIFTS AND CORNER NICKS,
WHICH CAN CAUSE THE GLASS TO FAIL CATASTROPHICALLY. TAKE CARE TO STORE
THE GLASS ON ON A SOFT, ROOM-TEMPERATURE SURFACE AND PREVENT THE COR-
NERS FROM BEING DAMAGED.
FIRST-TIME SETUP CONTINUED
02/12/15

WWE PRO MANUAL #780-50G1-00 5
SETUP AND MOVING
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
30. If pinballs were already installed into the lower ball trough,
remove them before lifting the playeld.
31. Raise the playeld and rest it against the backbox.
32. Grasp the lower arch between the ippers, and rmly but
gently pull directly up to raise the playeld 8-12 inches.
33. While holding the playeld up, pull the playeld toward you
until the two playeld supports are over the front edge of the
cabinet.
34. Rest the playeld on the front edge of the cabinet.
35. Visually inspect all cabinet cables and connector termina-
tions; ensure no wires or cables are pinched and that cable
harnesses are not pulled tight.
36. Locate the plumb bob in the parts bag in the cash box
37. Slide plumb bob onto the hanger wire. Note: the vertical po-
sition of the plumb bob aects tilt sensitivity - higher makes
the game more sensitive to tilting.
38. Tighten the Thumb Screw nger-tight.
39. Install the correct number of pinballs. Refer to the decal on
the lock down assembly for the correct number of pinballs.
LOCATING, LEVELING, AND FINAL SETUP
40. Select a location that is indoors, out of direct sunlight, and
climate controlled. Excessive moisture/humidity can cause
long-term damage to your game.
41. Adjust the front or rear levelers as necessary to position
the playeld level bubble, located on the front right of the
playeld next to the shooter lane, to oat between the two (2)
black lines. This will place the playeld at the recommended
6.5° pitch. Playeld angles greater than 6.5° can be achieved
by turning out the rear leg leveler(s) for increased diculty
and faster gameplay.
42. Use a pinball to roll down the center of the playeld for side-
to-side leveling, or use an external bubble level, digital level,
or smartphone level app.
43. Plug into a grounded outlet and check for proper operation
through DIAGNOSTICS.
44. Check the coin door: With the door closed, insert coins to
verify proper operation.
45. Play game: Check for satisfactory operation and adjust game
volume (push the Red Buttons inside the Coin Door).
46. If desired, perform any game diagnostics, game adjust-
ments, and pricing settings at this time.
FIRST-TIME SETUP CONTINUED
02/12/15

6 WWE PRO MANUAL #780-50G1-00
SETUP AND MOVING
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
1. SECURE THE BACKBOX
1. Ensure that the pinballs are re-
moved from the playeld, and se-
cure any free-moving mechanisms
that may get damaged in transport
2. Remove the backbox securing
bolts
3. Carefully lower the backbox onto
the side rails. Use a piece of card-
board or suitable padding between
the backbox and the game.
4. Securely strap the back box to the
game
5. The game may be transported with
the legs on. If the legs must be re-
moved, follow the remaining steps.
2. REMOVE THE LEGS AND
STAND UP
1.2 TRANSPORTING THE GAME
2
3
4
6. Remove the legs, rear legs rst. Use
a stool or a friend to support the
rear of the game.
7. Rest the rear of the game on the
ground.
6
CAUTION
NEVER TRANSPORT THE GAME IN A
MOVING VEHICLE WITH THE BACKBOX
RAISED! TWO PEOPLE ARE REQUIRED
TO REMOVE THE LEGS!
10. Secure all loose parts and trans-
port with a hand truck in the
upright position.
8. Stand the game up on its back.
8
9. Remove the front two legs.
9
When transporting the game, such as in the back of a truck or with a hand truck, the
game’s backbox must be secured to prevent damage to the side rails.
TOOLS REQUIRED
• STRAP (500LB OR GREATER)
• A HELPER
• HAND TRUCK
02/12/15

WWE PRO MANUAL #780-50G1-00 7
SPIKE PINBALL PLATFORM OVERVIEW
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
1.3 SPIKE SYSTEM AND NODE
GUIDE
Node
Address
Description Location Part Number
0 SPIKE CPU Node Backbox 520-6936-00
1Cabinet Node Cabinet 520-5319-00
8 Lower Playeld 48V
8-Driver Node
Lower playeld 520-6935-00
8a Lower Playeld Serial LED
Extension
Lower playeld 520-6950-00
9 Mid Playeld 48V 4-Driver
Node
Mid playeld 520-5329-00
9a Trough Serial Opto Re-
ceiver Extension
Lower playeld
ball trough
520-5345-00
10 Upper Mini Playeld
4-Driver 48V Node
Upper playeld 520-5329-00
11 Mid Playeld I/O Node Mid playeld 520-5322-00
WWE SPIKE NODE TABLE
1.4 SPIKE SYSTEM OVERVIEW
The SPIKE Pinball system is a rugged, distributed, and em-
bedded platform custom-designed for the rigors of the pinball
machine environment. SPIKE takes advantage of modern tech-
nologies to deliver an immersive pinball experience that supports
modern features, reduces cabling, and increases serviceability
and reliability.
A Stern Pinball machine based on the SPIKE system will have at
least two nodes networked together with the SPIKE node bus,
a custom industrial pinball control bus that is designed around
industry standards and optimized for the pinball environment.
The primary CPU node is networked to one or more input/output
nodes over standard Category 5 UTP (unshielded twisted pair)
ethernet cabling.
There are ve primary types of nodes that are found in the game.
• CPU node (Node 0) - The primary node that controls other
nodes in the system. Contains the primary game software
for the system and provides SPIKE node bus power for other
nodes.
• Cabinet 48V node (Node 1) - Specialized node with specic
inputs and outputs for coin doors, tilt mechanisms, and other
bottom-cabinet devices.
• 48V playeld node - Controls high power devices such
as coils and ashers, and also supports a few switch and
low-power outputs. Powered by the system 48V power supply.
• Light and switch node - High-density switch and low-power
LED outputs, bus-powered from the node bus. These boards
contain as many 32 switch inputs and light outputs.
• Node extensions - These sub-nodes add additional
low-power input and outputs to a specic Power or I/O node
and are connected with simple serial bus.
1.5 NODE BUS CABLING
The SPIKE node bus utilizes standard Ethernet-style RJ45 8-pin
modular jacks, and o-the-shelf Category 5e or better ethernet
cabling. The node bus is electrically dierent from Ethernet and
does not not utilize Ethernet or TCP/IP protocols or signaling
standards. SPIKE nodes are not compatible with standard com-
puter networking equipment.
CAUTION: Plugging a SPIKE Node or CPU board into a standard
Ethernet port may damage one or both devices and void your
warranty.
1.6 SYSTEM POWER
The SPIKE System is powered from an 48V DC power supply
bus. Each SPIKE node converts this voltage to lower voltages
required by the node and its specic components. A SPIKE 48V
node typically controls high-power outputs such as game coil
mechanisms and high-brightness LEDs. These powered nodes
are supplied directly with 48V system power. SPIKE standard I/O
nodes are low-power nodes that read switch inputs and output to
standard-brightness LEDs. Standard I/O nodes use the node bus
power, which is supplied by the main CPU node over the node
bus modular jack connectors.
COIN-DOOR SAFETY INTERLOCK
To protect the system and for user safety, power to the playeld
is disabled when the front coin door is opened. 48V system pow-
er and 9V node bus power is disabled to all playeld components
until the switch is closed.
1.7 SPIKE NODE ADDRESSES
Each SPIKE node has a unique address ranging from 0 to 15. Not
all addresses are used in all games. Nodes can be of the same
part number, so the address is specied on the DIP switches on
each node. When replacing a node, be certain that the correct
address is set. Nodes can have 3-position and 4-position DIP
switches. Refer to the appropriate table to set the address for
each type of Node. The correct address for a node can be found
in the SPIKE node reference section of the manual or in the game
diagnostic software. Address 0 is reserved for the backbox CPU
node, where the game software resides. Address 1 is reserved for
the cabinet node, located inside the coin door. These two nodes
do not have DIP switches as their address is not congurable.
Address 1 2 3
8 OFF OFF OFF
9 OFF OFF ON
2. SPIKE PINBALL PLATFORM OVERVIEW
02/12/15

8 WWE PRO MANUAL #780-50G1-00
SPIKE PINBALL PLATFORM OVERVIEW
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
10 OFF ON OFF
11 OFF ON ON
12 ON OFF OFF
13 ON OFF ON
14 ON ON OFF
15 ON ON ON
Figure 1.7.1. SPIKE node addresses for nodes with 3-position DIP
switches. Addresses 0-7 are not used by SPIKE nodes with 3-posi-
tion DIP switches.
Address 1 2 3 4
2ON OFF ON ON
3 ON OFF OFF ON
4OFF ON ON ON
5 OFF ON OFF ON
6 OFF OFF ON ON
7 OFF OFF OFF ON
8 OFF OFF OFF OFF
9 OFF OFF ON OFF
10 OFF ON OFF OFF
11 OFF ON ON OFF
12 ON OFF OFF OFF
13 ON OFF ON OFF
14 ON ON OFF OFF
15 ON ON ON OFF
Figure 1.7.2. SPIKE node addresses for nodes with 4-position DIP
switches. Addresses 0 and 1 are reserved for the CPU and Cabinet
nodes, respectively.
1.8 SPIKE NODE PROGRAMMING
The SPIKE nodes are smart nodes that have on-board pro-
cessors and run embedded code. The nodes are programmed
automatically by the CPU node whenever software updates are
installed to the CPU. When replacing a node, the CPU node will
detect and update the node to the latest software with no user
intervention. Always replace nodes with the power to the game
turned OFF.
1.9 SPIKE SYSTEM TERMINOLOGY
MULTI GENERAL ILLUMINATION LIGHTING
General Illumination Lighting is two or more lights powered by
one control source. These are often a number of LEDs connect-
ed in parallel and the system controls these as one large LED. A
missing LED will not aect these circuits, however a shorted LED
can cause the entire string of LEDs to turn o.
SINGLE LIGHTS
Single lights and LEDs are direct-controlled from SPIKE node
boards. A common power source is grounded by individual
transistors to turn individual LEDs on and o. Groups of LEDs,
usually by node connector, share a common power source, so if
a group of LEDs is out, check the wiring for the power source.
FLASHERS
SPIKE games treat ashers the same as single LEDs that draw
more power. Flashers are controlled from the same circuits that
power regular lights.
DRIVERS
A driver is a circuit that controls a high power-device such as a
coil, magnet, or motor. Each device has a common 48V power
source that is then connected to ground by a dedicated control
transistor. Each driver is protected against shorting, static elec-
tricity, and over-current conditions. Take caution as 48V is always
present on a device even when it is not energized.
OPTOS
Certain types of optical switches (“optos”) require external signal
conditioning. For these optos, they will interface to a SPIKE node
via an opto signal conditioning board.
1.10 SYSTEM PROTECTIONS
CAUTION: Unless explicitly directed by an Authorized Stern Re-
pair technician, perform ALL work on your pinball machine with
the power disabled!
INPUT/OUTPUT PROTECTIONS
SPIKE features built-in short-circuit, static electricity, and other
protections to maximize reliability. If an LED, coil or other device
shorts, it will be disabled but will not shut down the entire system
in most circumstances. Groups of LEDs, coils, and switches often
share common power supplies or other circuits, so it is possible
that a bad device will aect the group of related devices and
require removal or repair to x the group. The system diagnostics
will inform the technician of shorted or otherwise malfunctioning
devices whenever possible. While the system is protected against
permanent damage, it is strongly recommended to repair or
replace these bad components as soon as possible to minimize
downtime and maximize game earnings.
FUSES
Nodes that have 48 V power are fused individually. Fuse voltage
ratings are a safety rating and always must be higher than the
circuit the fuse is protecting. Never replace a fuse with a lower
voltage-rated fuse. Fuse current ratings must be replaced with
the same current value. A higher current value fuse could cause
catastrophic failures, and a lower-value fuse will cause premature
fuse failures.
Fuse Rating (Amps) Type Part Number
3/4 A Slow Blow MDL 200-5000-17
3 A Slow Blow MDL 200-5000-08
4 A Slow Blow MDL 200-5000-06
5 A Slow Blow MDL 200-5000-01
7 A Slow Blow MDL 200-5000-03
8 A Slow Blow MDL 200-5000-05
CAUTION: Always replace fuses with the exact current specica-
tions.
02/12/15

WWE PRO MANUAL #780-50G1-00 9
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
NODE 11
NODE 10
OFF
ON ON
123
3
3. LIGHT, SWITCH, AND DRIVER REFERENCE
BACKBOX
CPU NODE 0
D30D29D28 D13
SDA
RST
GND
SCL
RESET
CN18
LINE
OUT
TxD
NETSTAT
STATUS
RxD
5V 48V
24V
9V
S1
+48V
CN23
11
CN20
POWER
HEADPHONE
CN25
IN
L+ L-
C+ C- R+ R-
CN21
CN7
CN3 CN22
CN4 CN1
CN24
520-6936-00A
SPIKE CPU
11
1
1
BT1
AMPLIFIED AUDIO
OUT
SPIKE NODE BUS
USB
SD CARD
BATTERY
DIP S2
CABINET
CABINET NODE 1
NODE 9
NODE 8
OFF OFF OFF OFF
1234
DIP
SW1
When replacing node boards, ensure
DIP address switches are set cor-
rectly!
DIP
SW1
ON
OFFOFF
123
DIP
SW1
OFF
ON
OFF
123
DIP
SW1
STERN
CN4
CN11
FLIPPER
FLIPPER
CN12
CN14
CN2
CN5
CN8
3A 125V
TIME LAG FUSE
CN13
TO CPU
CN7
CABINET LEFT
CABINET RIGHT
METER 1 METER 2
MENU BUTTONS
CN6
CN3
CN10
CN9
SHAKER MOTOR
DBA
TICKET
COIN DOOR
Pinball
INPUTSLEDS
INPUTS LEDS
POWER
520-5319-00F
Cabinet Node
CN1
1
1
1
1
1
1111
1
1
LOWER
PLAYFIELD
SERIAL LED
NODE 8A
520-6950-00
Playeld rear
Playeld front
Node Bus Cable (RJ45)
Serial Data Cable
CN13
CN3
CN2
CN10 CN9
CN2 CN3
CN3
CN1
CN2
CN14
CN14
CN3 CN22
TROUGH SERIAL
OPTO RECEIVER
NODE 9A
520-5345-00
02/12/15

10 WWE PRO MANUAL #780-50G1-00
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
3.1 DRIVER REFERENCE
PLAYFIELD TOP PLAYFIELD BOTTOM
9
9
11
12
12
10
10
13
13
14
14
7
7
11
3
3
18
18
1
1
2
2
17
17
20,
15
20,
15
21,
16
21,
16
Figure 3.1.1. Playeld bottom component view, playeld shown in
service position. Rear of game is at bottom of gure.
Figure 3.1.2. Playeld top component view
02/12/15

WWE PRO MANUAL #780-50G1-00 11
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
ID Name Node Con-
nector
Ret.
Pin
Ret. Wire Volt-
age
V+ Pin V+ Color Location Type Address Part Number
1Trough 8 CN8 5 ORG-GRY 48V 6 GRY-ORG Playeld Coil - 27-1500 8-DR-5 090-5004-ND
2Auto Plunger 8 CN6 5 ORG-WHT 48V 6 GRY-ORG Playeld Coil - 23-800 8-DR-4 090-5001-ND
3 Center 3-Bank Drop
Target Reset
9 CN11 3 YEL-WHT 48V 4GRY-BLK Playeld Coil - 25-1240 9-DR-3 090-5034-ND
7 Ramp Control Gate
Right
10 CN11 3 BLU-RED 48V 4GRY-BRN Back Panel Coil - 32-1250 10-DR-3 090-5060-01-ND
8 Shaker Motor 1CN2 1,2 BLU 48V 3,5 RED Cabinet Motor 1-DR-0 041-5029-04
9 Left Pop Bumper 9 CN5 3 ORG-RED 48V 4GRY-BLK Playeld Coil - 26-1200 9-DR-0 090-5044-ND
10 Right Pop Bumper 9 CN7 3 ORG-BRN 48V 4GRY-BLK Playeld Coil - 26-1200 9-DR-1 090-5044-ND
11 Bottom Pop
Bumper
9 CN9 3 ORG-BLK 48V 4GRY-BLK Playeld Coil - 26-1200 9-DR-2 090-5044-ND
12 Left Ring Slingshot 10 CN5 3 YEL-BLK 48V 4GRY-BRN Mini-PF Coil - 26-1200 10-DR-0 090-5044-ND
13 Right Ring Slingshot 10 CN9 3 YEL-RED 48V 4GRY-BRN Mini-PF Coil - 26-1200 10-DR-2 090-5044-ND
14 Ring Eject 10 CN7 3 YEL-BRN 48V 4GRY-BRN Mini-PF Coil - 27-1500 10-DR-1 090-5004-ND
15 Left Flipper 8 CN5 3 ORG-YEL 48V 4GRY-ORG Playeld Coil - 24-850 8-DR-0 090-5083-03-ND
16 Right Flipper 8 CN7 3 ORG-GRN 48V 4GRY-ORG Playeld Coil - 24-850 8-DR-1 090-5083-03-ND
17 Left Slingshot 8 CN12 5 ORG-BLU 48V 6 GRY-ORG Playeld Coil - 26-1200 8-DR-7 090-5044-ND
18 Right Slingshot 8 CN10 5 ORG-VIO 48V 6 GRY-ORG Playeld Coil - 26-1200 8-DR-6 090-5044-ND
20 Left Flipper Hold 8 CN9 3 YEL-ORG 48V 4GRY-ORG Playeld Coil - 31-3500 8-DR-2 090-5083-03-ND
21 Right Flipper Hold 8 CN11 3 YEL-GRN 48V 4GRY-ORG Playeld Coil - 31-3500 8-DR-3 090-5083-03-ND
30 Meter 1 1CN3 2BLK 12V 1RED Cabinet Digital Out 1-DR-2 500-9946-00
31 Meter 2 1CN4 2BLK 12V 1RED Cabinet Digital Out 1-DR-3 500-9946-00
32 Ticket Dispenser 1CN11 3 12V 1Cabinet Digital Out 1-DR-4
DRIVER REFERENCE TABLE
Figure 3.2.1. Driver reference table.
3.2 LIGHTING REFERENCE
ID Name Node Node
Ext.
Conn. Ret.
Pin
Ret. Wire Src.
Pin
Src.
Wire
Location Type Light
Color
Address Part Number
1Start Button 1- CN6 3 YEL-BRN 1REDv Cabinet Feature White 1-LP-2 112-5033-08
2Tournament Start
Button
1- CN6 2YEL-RED 1RED Cabinet Feature White 1-LP-3 112-5033-08
3 Shoot Again 8 8a 8a-CN1 3 RED-GRY 5 RED Playeld Feature White 8a-LP-47 520-5307-00
4100 Thousand 8 8a 8a-CN1 2GRN-GRY 5 RED Playeld Feature White 8a-LP-46 520-5307-00
5 200 Thousand 8 8a 8a-CN1 1BLU-GRY 5 RED Playeld Feature White 8a-LP-45 520-5307-00
6 300 Thousand 8 8a CN14 D7 - - - Playeld Feature White 8a-LP-20 520-6950-00
7 400 Thousand 8 8a CN14 D6 - - - Playeld Feature White 8a-LP-19 520-6950-00
8 500 Thousand 8 8a CN14 D5 - - - Playeld Feature White 8a-LP-18 520-6950-00
9 600 Thousand 8 8a CN14 D4 - - - Playeld Feature White 8a-LP-17 520-6950-00
10 700 Thousand 8 8a CN14 D18 - - - Playeld Feature White 8a-LP-30 520-6950-00
11 800 Thousand 8 8a CN14 D17 - - - Playeld Feature White 8a-LP-29 520-6950-00
12 900 Thousand 8 8a CN14 D12 - - - Playeld Feature White 8a-LP-25 520-6950-00
13 1 Million 8 8a CN14 D3 - - - Playeld Feature White 8a-LP-16 520-6950-00
14 2 Million 8 8a CN14 D11 - - - Playeld Feature White 8a-LP-24 520-6950-00
15 3 Million 8 8a CN14 D16 - - - Playeld Feature White 8a-LP-28 520-6950-00
16 4 Million 8 8a CN14 D10 - - - Playeld Feature White 8a-LP-23 520-6950-00
17 2X 8 8a CN14 D14 - - - Playeld Feature White 8a-LP-27 520-6950-00
18 3X 8 8a CN14 D9 - - - Playeld Feature White 8a-LP-22 520-6950-00
19 4X 8 8a CN14 D13 - - - Playeld Feature White 8a-LP-26 520-6950-00
20 5X 8 8a CN14 D8 - - - Playeld Feature White 8a-LP-21 520-6950-00
21 Special When Red(Left) 8 8a 8a-CN4 5 ORG-GRN 8 RED Playeld Feature Red 8a-LP-43 112-5034-02
22 Special When
Red(Right)
8 8a 8a-CN5 5 ORG-GRN 8 RED Playeld Feature Red 8a-LP-38 112-5034-02
23 (Y)ES! 8 8a 8a-CN4 3 ORG-RED 8 RED Playeld Feature White 8a-LP-41 520-5307-00
Continued on next page...
02/12/15

12 WWE PRO MANUAL #780-50G1-00
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
Figure 3.2.2. Playeld bottom, shown in upright service position.
Figure 3.2.3. Playeld top view
LIGHTING REFERENCE
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
15
15
14
14
16
16
13
13
19
19
17
17
18
18
20
20
22
22
21
21
23
23
24
24
25
25
26
26
28
28
38
38
39
39
41
41
40
40
61
61
62
62
63
63
64
64
65
65
60
60
51
51
66
66
68
68
77
77
78
78
79
79
80
80
81
81
69
69
70
70
71
71
72
72
73
73
74
74
75
75
76
76
67
67
55
55
56
56
47
47
37
37
36
36
35
35
34
34
46
46
45
45
27
27
33
33
32
32
29-31
29-31
42-44
42-44
57-59
57-59
52-54
52-54
48-50
48-50
86
86
86
86
86
86
85
85
85
85
85
85
83
83
83
83
83
83
83
83
83
83
83
83
84
84
84
84
84
84
84
84
84
84
91
91
92
92
88
88
87
87
90
90
93
93
96
96
95
95
94
94
89
89
02/12/15

WWE PRO MANUAL #780-50G1-00 13
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
Figure 3.2.4. Cabinet lighting locations.
Figure 3.2.5. Playeld back panel lighting locations.
For detailed wire color, node board, pin-
out, and lighting component information,
locate the node that the light in question
is connected to and refer to the node
board detail section.
ID Name Node Node
Ext.
Conn. Ret.
Pin
Ret. Wire Src.
Pin
Src.
Wire
Location Type Light
Color
Address Part Number
24 Y(E)S! 8 8a 8a-CN4 1ORG-BLK 8 RED Playeld Feature White 8a-LP-40 520-5307-00
25 YE(S)! 8 8a 8a-CN5 1ORG-BLK 8 RED Playeld Feature White 8a-LP-35 520-5307-00
26 YES(!) 8 8a 8a-CN5 3 ORG-RED 8 RED Playeld Feature White 8a-LP-36 520-5307-00
27 KICK OUT 8 8a 8a-CN4 4ORG-YEL 8 RED Playeld Feature White 8a-LP-42 520-5307-00
28 Break Hold 8 8a 8a-CN5 4ORG-YEL 8 RED Playeld Feature White 8a-LP-37 520-5307-00
29 Left Lane Arrow(Red) 11 - CN2 7 RED-VIO 2RED Playeld Feature RGB 11-LP-3 520-5333-00
30 Left Lane Arrow(Green) 11 - CN2 8 GRN-VIO 2RED Playeld Feature RGB 11-LP-4 520-5333-00
31 Left Lane Arrow(Blue) 11 - CN2 9 BLU-VIO 2RED Playeld Feature RGB 11-LP-5 520-5333-00
32 Tag Team 11 - CN2 10 YEL-BLK 3 RED Playeld Feature White 11-LP-6 520-5307-00
33 Extra Ball 11 - CN2 11 YEL-BRN 3 RED Playeld Feature White 11-LP-7 520-5307-00
34 Light Kick Out 11 - CN6 9 BRN-BLU 2RED Playeld Feature White 11-LP-21 520-5307-00
35 Center 3-Bank(Left) 9 - CN16 2BRN-ORG 1YEL Playeld Feature White 9-LP-1 520-5307-00
36 Center 3-Bank(Center) 9 - CN16 3 BRN-YEL 1YEL Playeld Feature White 9-LP-2 520-5307-00
37 Center 3-Bank(Right) 9 - CN16 4BRN-GRN 1YEL Playeld Feature White 9-LP-3 520-5307-00
38 Light Break Hold 11 - CN6 10 BRN-VIO 3 RED Playeld Feature White 11-LP-22 520-5307-00
39 Right Lane Arrow 11 - CN6 11 BRN-GRY 3 RED Playeld Feature White 11-LP-23 520-5307-00
40 Right 2-Bank Tar-
get(Top)
11 - CN8 10 ORG-VIO 3 RED Playeld Feature White 11-LP-30 520-5307-00
41 Right 2-Bank Tar-
get(Bottom)
11 - CN8 11 ORG-GRY 3 RED Playeld Feature White 11-LP-31 520-5307-00
42 L. Ramp Arrow(Red) 11 - CN2 4RED-GRN 3 RED Playeld Feature RGB 11-LP-0 520-5333-00
43 L. Ramp Arrow(Green) 11 - CN2 5 GRN 3 RED Playeld Feature RGB 11-LP-1 520-5333-00
44 L. Ramp Arrow(Blue) 11 - CN2 6 BLU-GRN 3 RED Playeld Feature RGB 11-LP-2 520-5333-00
45 Left Ramp(Ring) 11 - CN6 7 BRN-YEL 2RED Playeld Feature White 11-LP-19 520-5307-00
46 Left Ramp(Ref) 11 - CN6 8 BRN-GRN 2RED Playeld Feature White 11-LP-20 520-5307-00
47 Tag(Left) 9 - CN16 5 BRN-GRY 1YEL Playeld Feature White 9-LP-4 520-5307-00
48 Left Orbit Arrow(Red) 9 - CN16 7 RED-BRN 1YEL Playeld Feature RGB 9-LP-6 520-5333-00
49 Left Orbit Arrow(Green) 9 - CN16 8 GRN-BRN 1YEL Playeld Feature RGB 9-LP-7 520-5333-00
50 Left Orbit Arrow(Blue) 9 - CN16 9 BLU-BRN 1YEL Playeld Feature RGB 9-LP-8 520-5333-00
51 Left Orbit(Ref) 9 - CN16 10 ORG-BRN 1YEL Playeld Feature White 9-LP-9 520-5307-00
52 Right Orbit Arrow(Red) 9 - CN16 11 RED-ORG 1YEL Playeld Feature RGB 9-LP-10 520-5333-00
LIGHTING REFERENCE
LIGHTING REFERENCE CONTINUED
Continued on next page...
1
2
84 84 84 84 84 84 84
99 100
98
97
Multi, General Illumination
Single, Low-Current
Flash, High-Current
LEGEND
82
02/12/15

14 WWE PRO MANUAL #780-50G1-00
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
ID Name Node Node
Ext.
Conn. Ret.
Pin
Ret. Wire Src.
Pin
Src.
Wire
Location Type Light
Color
Address Part Number
53 Right Orbit Arrow(Green) 9 - CN16 12 GRN-ORG 1YEL Playeld Feature RGB 9-LP-11 520-5333-00
54 Right Orbit Arrow(Blue) 9 - CN16 13 BLU-ORG 1YEL Playeld Feature RGB 9-LP-12 520-5333-00
55 Right Orbit (Ref) 9 - CN16 14 ORG-BLK 1YEL Playeld Feature White 9-LP-13 520-5307-00
56 Tag(Right) 9 - CN16 6 BRN-WHT 1YEL Playeld Feature White 9-LP-5 520-5307-00
57 Right Ramp Arrow(Red) 11 - CN4 4RED-GRY 2RED Playeld Feature RGB 11-LP-8 520-5333-00
58 Right Ramp Ar-
row(Green)
11 - CN4 5 GRN-GRY 2RED Playeld Feature RGB 11-LP-9 520-5333-00
59 Right Ramp Arrow(Blue) 11 - CN4 6 BLU-GRY 2RED Playeld Feature RGB 11-LP-10 520-5333-00
60 Right Ramp(Ring) 11 - CN8 8 ORG-GRN 2RED Playeld Feature White 11-LP-28 520-5307-00
61 Right Ramp(Ref) 11 - CN8 9 ORG-BLU 2RED Playeld Feature White 11-LP-29 520-5307-00
62 Ladder 1(bottom) 11 - CN8 4ORG-BLK 2RED Playeld Feature White 11-LP-24 520-5307-00
63 Ladder 2 11 - CN8 5 ORG-BRN 2RED Playeld Feature White 11-LP-25 520-5307-00
64 Ladder 3 11 - CN8 6 ORG-RED 2RED Playeld Feature White 11-LP-26 520-5307-00
65 Ladder 4(top) 11 - CN8 7 ORG-YEL 2RED Playeld Feature White 11-LP-27 520-5307-00
66 Flipper When Lit(Left) 10 - CN16 11 ORG-YEL 1YEL Mini-Playeld Feature White 10-LP-10 520-5307-00
67 Flipper When Lit(Right) 10 - CN16 12 ORG-GRN 1YEL Mini-Playeld Feature White 10-LP-11 520-5307-00
68 Ring 1(Left) 10 - CN16 2YEL-BLK 1YEL Mini-Playeld Feature White 10-LP-1 520-6951-00
69 Ring 2 10 - CN16 3 YEL-BRN 1YEL Mini-Playeld Feature White 10-LP-2 520-6951-00
70 Ring 3 10 - CN16 4YEL-RED 1YEL Mini-Playeld Feature White 10-LP-3 520-6951-00
71 Ring 4 10 - CN16 5 YEL-ORG 1YEL Mini-Playeld Feature White 10-LP-4 520-6951-00
72 Ring 5 10 - CN16 6 YEL-GRN 1YEL Mini-Playeld Feature White 10-LP-5 520-6951-00
73 Ring 6 10 - CN16 7 YEL-BLU 1YEL Mini-Playeld Feature White 10-LP-6 520-6951-00
74 Ring 7 10 - CN16 8 YEL-VIO 1YEL Mini-Playeld Feature White 10-LP-7 520-6951-00
75 Ring 8 10 - CN16 9 YEL-GRY 1YEL Mini-Playeld Feature White 10-LP-8 520-6951-00
76 Ring 9(Right) 10 - CN16 10 YEL-WHT 1YEL Mini-Playeld Feature White 10-LP-9 520-6951-00
77 Top lane 1(Left) 11 - CN4 7 YEL-RED 3 RED Playeld Feature White 11-LP-11 520-5307-00
78 Top lane 2 11 - CN4 8 YEL-ORG 3 RED Playeld Feature White 11-LP-12 520-5307-00
79 Top lane 3 11 - CN4 9 YEL-GRN 3 RED Playeld Feature White 11-LP-13 520-5307-00
80 Top lane 4 11 - CN4 10 YEL-BLU 3 RED Playeld Feature White 11-LP-14 520-5307-00
81 Top lane 5(Right) 11 - CN4 11 YEL-VIO 3 RED Playeld Feature White 11-LP-15 520-5307-00
82 Coin Door GI(x2) 1- CN5 2YEL 1YEL-
WHT
Coin Door G.I. White 1-LP-1 112-5033-08
83 Left Playeld GI 9 - CN13 1RED-BLK 3 YEL-BLK Playeld G.I. White/
Red
9-LP-0 112-5034-08,
112-5033-02
84 Right Playeld GI 10 - CN13 1GRN-BLK 3 YEL-BLK Playeld/
Back Panel
G.I. White/
Red
10-LP-0 112-5034-08,
112-5033-02
85 Left Slingshot GI(x3) 8 - CN12 1BRN-BLU 2YEL Playeld G.I. White 8-LP-3 112-5034-08
86 Right Slingshot GI(x3) 8 - CN10 1BRN-VIO 2YEL Playeld G.I. White 8-LP-2 112-5034-08
87 Left Outlane 8 8a 8a-CN4 6 ORG-BLU 8 RED Playeld Flash White 8a-LP-44 520-6785-00
88 Right Outlane 8 8a 8a-CN5 6 ORG-BLU 8 RED Playeld Flash White 8a-LP-39 520-6785-00
89 United States Champion 8 8a CN14 D20 - - - Playeld Flash White 8a-LP-33 199-6950-00
90 Tag Team Champion 8 8a CN14 D23 - - - Playeld Flash White 8a-LP-34 199-6950-00
91 Intercontinental Cham-
pion
8 8a CN14 D21 - - - Playeld Flash White 8a-LP-32 199-6950-00
92 World Heavyweight
Champion
8 8a CN14 D19 - - - Playeld Flash White 8a-LP-31 199-6950-00
93 Pop Bumper 9 - CN16 15 ORG-RED 1YEL Playeld Flash White 9-LP-14 520-6785-00
94 Left Ramp 11 - CN6 4BRN-BLK 2RED Playeld Flash White 11-LP-16 520-6785-00
95 Ladder(Bottom) 11 - CN6 6 BRN-ORG 3 RED Playeld Flash White 11-LP-18 520-6785-00
96 Right Ramp 11 - CN6 5 BRN-RED 3 RED Playeld Flash White 11-LP-17 520-6785-00
97 Top Lane(Left) 10 - CN16 15 ORG-GRY 1YEL Back Pnl Flash White 10-LP-14 113-5045-08
98 Top Lane(Right) 10 - CN16 16 ORG-WHT 1YEL Back Pnl Flash White 10-LP-15 113-5045-08
99 Bell 10 - CN16 13 ORG-BLU 1YEL Back Pnl Flash White 10-LP-12 520-6785-00
100 Ladder 10 - CN16 14 ORG-VIO 1YEL Back Pnl Flash White 10-LP-13 520-6785-00
LIGHTING REFERENCE CONTINUED
02/12/15

WWE PRO MANUAL #780-50G1-00 15
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
3.3 SWITCH REFERENCE
Continued on next page
ID Name Node Node
Ext
Conn. Input
Pin
Input
Wire
GND
Pin
Ground
Wire
Location Type Address Part Number
1Left Return Lane 11 - CN7 2LGN-YEL 10 BLK-RED Playeld Rollover 11-SW-0 500-9935-04
2Right Return Lane 11 - CN5 2PNK-BLK 10 BLK-GRY Playeld Rollover 11-SW-8 500-9935-04
3 Left Outlane 11 - CN7 3 LGN-BLU 10 BLK-RED Playeld Rollover 11-SW-1 500-9935-04
4Right Outlane 11 - CN5 3 PNK-BRN 10 BLK-GRY Playeld Rollover 11-SW-9 500-9935-04
5 Left Slingshot 8 - CN12 4GRY-BLU 3 BLK-GRN Playeld Leaf 8-SW-7 180-5231-00
6 Right Slingshot 8 - CN10 4GRY-VIO 3 BLK-GRN Playeld Leaf 8-SW-6 180-5231-00
7 Center 3-Bank Drop
Target Right
9 - CN15 4WHT-ORG 14 BLK-BLU Playeld Opto 9-SW-6 520-5252-13
8 Center 3-Bank Drop
Target Center
9 - CN15 3 WHT-RED 14 BLK-BLU Playeld Opto 9-SW-5 520-5252-13
9 Center 3-Bank Drop
Target Left
9 - CN15 2WHT-BRN 14 BLK-BLU Playeld Opto 9-SW-4 520-5252-13
10 Left Flipper Button 8 - CN9 2GRY-BRN 1BLK-GRN Cabinet Leaf 8-SW-2 180-5164-01
11 Right Flipper Button 8 - CN11 2GRY-RED 1BLK-GRN Cabinet Leaf 8-SW-3 180-5164-01
12 Left Lane 11 - CN7 5 LGN-GRY 10 BLK-RED Playeld Rollover 11-SW-3 500-9935-04
14 Left Orbit 9 - CN15 9 WHT-GRY 14 BLK-BLU Playeld Rollover 9-SW-11 180-5230-01
15 Tournament Start
Button
1- CN6 9 GRY-WHT 5 BLK-WHT Cabinet Micro 1-SW-12 180-5174-00
16 Trough 6 9 9a CN14 - - - - Playeld Opto 9a-SW-17 520-5344-00 tx
520-5345-00 rx
17 Trough 5 9 9a CN14 - - - - Playeld Opto 9a-SW-18 520-5344-00 tx
520-5345-00 rx
18 Trough 4 9 9a CN14 - - - - Playeld Opto 9a-SW-19 520-5344-00 tx
520-5345-00 rx
19 Trough 3 9 9a CN14 - - - - Playeld Opto 9a-SW-20 520-5344-00 tx
520-5345-00 rx
20 Trough 2 9 9a CN14 - - - - Playeld Opto 9a-SW-21 520-5344-00 tx
520-5345-00 rx
21 Trough 1 9 9a CN14 - - - - Playeld Opto 9a-SW-22 520-5344-00 tx
520-5345-00 rx
22 Trough Jam 9 9a CN14 - - - - Playeld Opto 9a-SW-23 520-5344-00 tx
520-5345-00 rx
23 Shooter Lane 8 - CN6 4GRY-WHT 3 BLK-GRN Playeld Rollover 8-SW-4 180-5157-01
24 Right Orbit 9 - CN15 10 WHT 14 BLK-BLU Playeld Rollover 9-SW-12 180-5230-01
25 Left Ring Sling 10 - CN5 2GRY-BLK 1BLK-VIO Mini-Playeld Leaf 10-SW-0 180-5231-00
26 Right Ring Sling 10 - CN9 2GRY-RED 1BLK-VIO Mini-Playeld Leaf 10-SW-2 180-5231-00
27 Ring Eject 10 - CN7 2GRY-BRN 1BLK-VIO Mini-Playeld Rollover 10-SW-1 180-5209-00
28 Bottom Ring Exit 10 - CN11 2GRY-ORG 1BLK-VIO Mini-Playeld Rollover 10-SW-3 180-5057-00
29 Right 2-Bank Top 11 - CN5 6 PNK-YEL 10 BLK-GRY Playeld Leaf, Target 11-SW-12 515-9784-05-00
30 Left Pop Bumper 9 - CN5 2BRN-RED 1BLK-BLU Playeld Leaf 9-SW-0 180-5232-00
31 Right Pop Bumper 9 - CN7 2BRN 1BLK-BLU Playeld Leaf 9-SW-1 180-5232-00
32 Bottom Pop Bumper 9 - CN9 2BRN-BLK 1BLK-BLU Playeld Leaf 9-SW-2 180-5232-00
33 Right 2-Bank Bottom 11 - CN5 7 PNK-GRN 10 BLK-GRY Playeld Leaf, Target 11-SW-13 515-9784-05-00
34 Right Ring Exit 10 - CN15 13 LGN-ORG 14 BLK-VIO Playeld Rollover 10-SW-15 500-9935-04
35 Shooter Exit 11 - CN5 5 PNK-ORG 10 BLK-GRY Playeld Rollover 11-SW-11 500-9935-04
36 Right single standup 11 - CN5 4PNK-RED 10 BLK-GRY Playeld Leaf, Target 11-SW-10 515-9786-07-00
37 Left single standup 11 - CN7 4LGN-VIO 10 BLK-RED Playeld Leaf, Target 11-SW-2 515-9786-07-00
38 Left ramp standup 9 - CN15 7 WHT-BLU 14 BLK-BLU Playeld Leaf, Target 9-SW-9 515-9786-04-00
39 Right ramp standup 9 - CN15 8 WHT-VIO 14 BLK-BLU Playeld Leaf, Target 9-SW-10 515-9786-04-00
41 Top lane 1 11 - CN3 2TAN-BLK 10 BLK-ORG Playeld Rollover 11-SW-16 180-5209-00
42 Top lane 2 11 - CN3 3 TAN-RED 10 BLK-ORG Playeld Rollover 11-SW-17 180-5209-00
43 Top lane 3 11 - CN3 4TAN-ORG 10 BLK-ORG Playeld Rollover 11-SW-18 180-5209-00
44 Top lane 4 11 - CN3 5 TAN-YEL 10 BLK-ORG Playeld Rollover 11-SW-19 180-5209-00
45 Top lane 5 11 - CN3 6 TAN-GRN 10 BLK-ORG Playeld Rollover 11-SW-20 180-5209-00
02/12/15

16 WWE PRO MANUAL #780-50G1-00
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
Figure 3.3.2. Switch locations, playeld top view Figure 3.3.3. Switch locations, playeld bottom, shown in upright
service position.
SWITCH REFERENCE
41
41
48
48
42
42
43
43
27
27
44
44
45
45
46
46
53
53
1
1
3
3
5
5
65 66
5
5
6
6
6
6
23
23
7
7
8
8
9
9
12
12
37
37
29
29
39
39
31
31
32
32
30
30
63
63
47
47
25
25
14
14
24
24
28
28
26
26
54
54
57
57
60
60
61
61
49
49
34
34
55
55
59
59
56
56
58
58
64
64
38
38
36
36
35
35
33
33
2
2
4
4
16-
22
16-
22
02/12/15

WWE PRO MANUAL #780-50G1-00 17
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
ID Name Node Node
Ext
Conn. Input
Pin
Input
Wire
GND
Pin
Ground
Wire
Location Type Address Part Number
46 Ladder exit 11 - CN3 8 TAN-VIO 10 BLK-ORG Playeld Rollover 11-SW-22 180-5209-00
47 Left ring exit 10 - CN15 11 LGN-BRN 14 BLK-VIO Playeld Rollover 10-SW-13 180-5209-00
48 Left Ramp Exit 9 - CN15 11 BRN-BLU 14 BLK-BLU Playeld Opto 9-SW-13 500-6775-01
49 Right Ramp Exit 9 - CN15 12 BRN-VIO 14 BLK-BLU Playeld Opto 9-SW-14 500-6775-01
53 Ladder 4 11 - CN3 7 TAN-BLU 10 BLK-ORG Playeld Rollover 11-SW-21 180-5230-01
54 Ring standup left 1 10 - CN15 2WHT-BRN 14 BLK-VIO Mini-Playeld Leaf, Target 10-SW-4 515-9784-00-00
55 Ring standup left 2 10 - CN15 3 WHT-RED 14 BLK-VIO Mini-Playeld Leaf, Target 10-SW-5 515-9783-00-00
56 Ring standup left 3 10 - CN15 4WHT-ORG 14 BLK-VIO Mini-Playeld Leaf, Target 10-SW-6 515-9784-00-00
57 Top lane Left exit 10 - CN15 10 LGN-BLK 14 BLK-VIO Playeld Rollover 10-SW-12 180-5209-00
58 Ring standup Right 1 10 - CN15 5 WHT-YEL 14 BLK-VIO Mini-Playeld Leaf, Target 10-SW-7 515-9784-00-00
59 Ring standup Right 2 10 - CN15 6 WHT-GRN 14 BLK-VIO Mini-Playeld Leaf, Target 10-SW-8 515-9783-00-00
60 Ring standup Right 3 10 - CN15 7 WHT-BLU 14 BLK-VIO Mini-Playeld Leaf, Target 10-SW-9 515-9784-00-00
61 Top lane right exit 10 - CN15 12 LGN-RED 14 BLK-VIO Playeld Rollover 10-SW-14 180-5209-00
62 Start Button 1- CN6 10 GRY 5 BLK-WHT Cabinet Micro 1-SW-11 180-5174-00
63 Pop Bumper Stage
Left Exit
9 - CN15 5 WHT-YEL 14 BLK-BLU Playeld Opto 9-SW-7 500-6775-01
64 Pop Bumper Stage
Right Exit
9 - CN15 6 WHT-GRN 14 BLK-BLU Playeld Opto 9-SW-8 500-6775-01
65 Left Flipper EOS 8 - CN5 2GRY-YEL 1BLK-GRN Playeld Leaf 8-SW-0 180-5149-00
66 Right Flipper EOS 8 - CN7 2GRY-GRN 1BLK-GRN Playeld Leaf 8-SW-1 180-5149-00
67 Left Coin 1- CN5 9 PNK-BRN 3 BLK Cabinet Micro 1-SW-16
68 Right Coin 1- CN5 8 PNK-RED 3 BLK Cabinet Micro 1-SW-18
69 Center Coin 1- CN5 7 PNK-ORG 3 BLK Cabinet Micro 1-SW-17
70 Fourth Coin 1- CN5 6 - - - Cabinet - 1-SW-19
71 Fifth Coin 1- CN5 5 - - - Cabinet - 1-SW-20
72 Tilt Pendulum 1- CN6 7 WHT 5 BLK-WHT Cabinet Plumb Bob 1-SW-14
74 Upper Left Flipper
Button
10 - CN15 8 VIO 14 BLK-VIO Cabinet Leaf 10-SW-10 180-5164-01
75 Upper Right Flipper
Button
10 - CN15 9 VIO-WHT 14 BLK-VIO Cabinet Leaf 10-SW-11 180-5164-01
76 Ticket Notch 1- CN11 5 - - - Cabinet - 1-SW-8
77 Slam Tilt 1- CN5 4LGN-RED 3 BLK Cabinet - 1-SW-21
SWITCH REFERENCE CONTINUED
11
10
62
15 72
73
67
C9-
C12 68
Figure 3.3.4. Cabinet switch locations. Figure 3.3.5. Coin door switch locations. Refer to Coin Door Refer-
ence for other parts.
02/12/15

18 WWE PRO MANUAL #780-50G1-00
LIGHT, SWITCH, AND DRIVER REFERENCE
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
ID Name Node Node
Ext
Conn. Input
Pin
Input
Wire
GND
Pin
Ground
Wire
Location Type Address Part Number
C1 DIP 1 0 - - - - - - CPU Node 0-SW-0 -
C10 Service Plus 0 - CN25 3 LGN-VIO 6 BLK Coin Door 0-SW-10 180-5192-02
C11 Service Minus 0 - CN25 2LGN-BLU 6 BLK Coin Door 0-SW-11 180-5192-02
C12 Service Back 0 - CN25 1LGN-BLK 6 BLK Coin Door 0-SW-12 180-5192-00
C16 Power Interlock
Sense
0 - CN7 4GRY-RED 1BLK Cabinet Interlock 0-SW-16 180-5136-00
C2 DIP 2 0 - - - - - - CPU Node 0-SW-2 -
C3 DIP 3 0 - - - - - - CPU Node 0-SW-3 -
C4 DIP 4 0 - - - - - - CPU Node 0-SW-4 -
C5 DIP 5 0 - - - - - - CPU Node 0-SW-5 -
C6 DIP 6 0 - - - - - - CPU Node 0-SW-6 -
C7 DIP 7 0 - - - - - - CPU Node 0-SW-7 -
C8 DIP 8 0 - - - - - - CPU Node 0-SW-8 -
C9 Service Select 0 - CN25 4LGN-GRY 6 BLK Coin Door 0-SW-9 180-5192-04
Figure 3.3.1. Switch reference table. See individual node pages in Section 3 for detailed pinouts and technical data.
SWITCH REFERENCE TABLE CONTINUED
02/12/15

D30D29D28 D13
SDA
RST
GND
SCL
RESET
CN18
LINE
OUT
TxD
NETSTAT
STATUS
RxD
5V 48V
24V
9V
S1
+48V
CN23
11
CN20
POWER
HEADPHONE
CN25
IN
L+ L-
C+ C- R+ R-
CN21
CN7
CN3 CN22
CN4 CN1
CN24
520-6936-00A
SPIKE CPU
11
1
1
BT1
AMPLIFIED AUDIO
OUT
SPIKE NODE BUS
USB
SD CARD
BATTERY
DIP S2
Figure 3.3.6. SPIKE CPU Node connector detail.
Figure 3.3.7. Country code DIP switch settings.
Figure 3.3.8. Audio Pinouts
WWE PRO MANUAL #780-50G1-00 19
ELECTRONIC PINOUTS AND SCHEMATICS
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
CONNECTORS
ID Connector Type Description
CN1 5-Pin .156” Header Backbox 2-channel amplied speaker out
CN3 RJ45 SPIKE node bus - to cabinet node N1
CN4 2-Pin .156” Cabinet 1-channel amplied speaker out
CN7 5-Pin .156” Header 48V supply from main power supply
CN18 3.5mm Stereo TRS
jack
Headphone Jack
CN20 USB USB connector - for software updates,
audit dumps, and expansion modules
CN21 USB USB connector - for software updates,
audit dumps, and expansion modules
CN22 RJ45 SPIKE node bus - to playeld node, N8
CN23 14-Pin .100” Header Dot matrix display connector
CN24 4-Pin .156” Header 5V DC and ground out to the LED display
CN25 12-Pin .100” Header Dedicated switch inputs - service, volume
switches
COMPONENTS
ID Name
S1 Reset Switch
S2 DIP Switches
SD CARD For system SD card. Note: only to be removed if instruct-
ed to by Stern Service.
BT1 CR232 3V Lithium battery for game clock between power
cycles
ID Type Pin Description Minimum
Imped-
ance
Max
Power
(RMS)
CN18 TRS 3.5mm
Headphone
Jack
Tip Headphone Left 8 Ohms 200mW
Ring Headphone Right 8 Ohms 200mW
Sleeve Audio Ground - -
CN1 .156" 5-pin
Header
1Speaker Right
Ground (-)
4 Ohms -
2Speaker Right (+) 4 Ohms 20W
3 n/c - -
4Speaker Left
Ground (-)
4 Ohms -
5 Speaker Left (+) 4 Ohms 20W
CN4 .156" 2-pin
Header
1Woofer Ground (-) 8 Ohms -
2Woofer Out (+) 8 Ohms 40W
CN27 .100" 3-pin
header
1Line Out Left (+) 600 Ohms -
2Line Out Ground - -
3 Line Out Right (-) 600 Ohms -
AUDIO PINOUTS
COUNTRY CODES (DIP S2)
DIP S2
Country 12345678
USA OFF OFF OFF OFF OFF OFF OFF OFF
Austria ON OFF OFF OFF OFF OFF OFF OFF
Australia ON OFF ON ON OFF OFF OFF OFF
Belgium OFF ON OFF OFF OFF OFF OFF OFF
Canada 1 ON ON OFF OFF OFF OFF OFF OFF
Canada 2 OFF ON OFF ON ON OFF OFF OFF
Croatia OFF ON ON OFF ON OFF OFF OFF
Denmark ON OFF OFF ON OFF OFF OFF OFF
Finland ON OFF ON OFF OFF OFF OFF OFF
France OFF ON ON OFF OFF OFF OFF OFF
Germany ON ON ON OFF OFF OFF OFF OFF
Greece ON ON ON ON OFF OFF OFF OFF
Italy OFF OFF OFF ON OFF OFF OFF OFF
Japan ON OFF ON OFF ON OFF OFF OFF
Middle East ON ON ON OFF ON OFF OFF OFF
Netherlands OFF OFF ON OFF OFF OFF OFF OFF
New Zealand OFF OFF OFF OFF ON OFF OFF OFF
Norway OFF ON OFF ON OFF OFF OFF OFF
Portugal ON OFF OFF OFF OFF ON OFF OFF
Russia ON OFF OFF ON ON OFF OFF OFF
S. Africa OFF OFF ON OFF ON OFF OFF OFF
Spain OFF ON OFF OFF ON OFF OFF OFF
Sweden ON ON OFF ON OFF OFF OFF OFF
Switzerland OFF OFF ON ON OFF OFF OFF OFF
Taiwan OFF OFF OFF ON ON OFF OFF OFF
United Kingdom OFF ON ON ON OFF OFF OFF OFF
4. ELECTRONIC PINOUTS AND SCHEMATICS
4.1 SPIKE CPU NODE 0
520-6936-00
02/12/15

20 WWE PRO MANUAL #780-50G1-00
ELECTRONIC PINOUTS AND SCHEMATICS
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
SPIKE CPU NODE 0 CONTINUED
STATUS LEDS
LED
ID
Name Color Description
48V +48V Supply In Red ON: Main system power is connected, OFF: No 48V system power. Check power supply connections,
cables, and fuses.
24V +24V Audio Power Red ON: Audio power supply is good, OFF: Audio power supply o, call tech support.
9V +9V Node Bus Power Red ON: Node bus power supply is good, OFF: Node bus power supply bad, call tech support.
5V Red ON: Logic power supply is good. OFF: Logic power supply bad, call tech support.
TxD Node bus transmit Red Node bus transmit activity
RxD Node bus receive Red Node bus receive activity
Sta-
tus
System status Red Constant double blink - game software running
Net-
stat
Network status Red Communication bridge activity
DIRECT SWITCH MAPPING (CN25)
The coin-door diagnostic switches are connected directly to the CPU node via the Cabinet Node. Note that both the CPU and Cabinet
nodes are required for diagnostic switch operation.
ID Name Conn. Input
Pin
Input Wire GND
Pin
Ground
Wire
Location Type Address Part Number
C1 DIP 1 - - - - - CPU Node 0-SW-0 -
C2 DIP 2 - - - - - CPU Node 0-SW-2 -
C3 DIP 3 - - - - - CPU Node 0-SW-3 -
C4 DIP 4 - - - - - CPU Node 0-SW-4 -
C5 DIP 5 - - - - - CPU Node 0-SW-5 -
C6 DIP 6 - - - - - CPU Node 0-SW-6 -
C7 DIP 7 - - - - - CPU Node 0-SW-7 -
C8 DIP 8 - - - - - CPU Node 0-SW-8 -
C9 Service Select CN25 4LGN-GRY 6 BLK Coin Door 0-SW-9 180-5192-04
C10 Service Plus CN25 3 LGN-VIO 6 BLK Coin Door 0-SW-10 180-5192-02
C11 Service Minus CN25 2LGN-BLU 6 BLK Coin Door 0-SW-11 180-5192-02
C12 Service Back CN25 1LGN-BLK 6 BLK Coin Door 0-SW-12 180-5192-00
C16 Playeld Power Interlock CN7 4GRY 5 GRY-RED Cabinet Interlock 0-SW-16 180-5136-00
Figure 4.1.1. Service switch wiring. Note that the Cabient Node must be present and CN10 and CN12 connected for the Coin Door Service
Switches to function correctly.
COIN DOOR SERVICE SWITCH WIRING
02/12/15