STILLA EASTWOOD 8x12 User manual

V5—2023 Eastwood [8x12]
EASTWOOD [8x12]
USER MANUAL
IMPORTANT
Read carefully. Retain for future refence

V5—2023 Eastwood [8x12]
SAFETY & CARE GUIDELINES
1. Take care when moving and working with the painted panels, use the supplied packaging to avoid damage to painted
surfaces.
2. When arranging the shed components for inial check, do not store the panels laid down, stand up where possible.
3. Ensure you fully understand the use of power tools recommended for use in assembling this shed.
4. Eye protecon should be worn when necessary, when operang power tools.
5. Suitable Gloves will protect Hands, take care when handling Roof Sheeng and other Metal components
6. Use appropriate sun protecon when working outdoors.
7. Secure the shed to a suitable immovable foundaon. [We recommend: Concrete Slab or Wooden Heavy Floor]
8. Team liing of heavy items is recommended to avoid injury.
9. Touch up paint is provided in the installaon kit to address minor marks / blemishes to painted surfaces.
10. Do not stand or walk on the roof.
11. Do not lay down panels without protecng the paint
1. UNPACK & CONFIRM
Read the safety & care and guidelines. Every part needed to construct your shed is included inside the pack; Frames; panels;
doors; windows; hardware kits & roofing. Please fully unpack all the parts & check against the parts checklist before con-
tacng customer service about anything you believe may be missing or damaged. Thank-you!
Protect Painted surfaces when laid down for processing.

V5—2023 Eastwood [8x12]
TOOLS REQUIRED
Light coloured crayon/chinagraph pencil white/yellow.
Phillips Bit (PH2), Baen Screw Bit, Phillips Bit #2, 5/16” Hex driver, Drill Bits 3mm & 4mm, Countersink Bit (or Combina-
on.)
This product requires a minimum of 2 persons to assemble.
For external access during assembly,
ensure there is adequate space around
the perimeter of the shed assembly
space.
Assemble in order presented in this manual. Do not skip any processes.
or
Preparing your site
The installaon locaon needs to be flat, level and solid. Pavers or a solid material that will not be
affected by weather can be used to perfectly level the shed by placing under the floor frame where
required, make sure all members are supported. If the locaon is sloped we recommend making level
with a slab or Timber floor.
If you are installing your shed on a Slla floor, this can be placed on unlevelled surfaces and levelled
up by using the 100x100 stumps provided. A separate detail is provided for Floor Installaon.

V5—2023 Eastwood [8x12]
SHED COMPONENTS
Carefully unpack all the items from shipping carton. Layout in a clean and safe area. Please check you have all compo-
nents and they have no defects before proceeding.
WALL — BOTTOM PLATE
[2] [8] [46]
FS295T2, Frame Sill,70mm x 45mm x 295mm Tenon
both Ends.
FS1130T2, Frame Sill,70mm x 45mm x 1130mm Tenon
both Ends
FB20MO/SM Sch Screw #6 x
20mm, Flat Buon Head, Panel Fixing to
Sill
WALL — UPRIGHTS
[4] [1]
CP1926 Pine,70mm x 70mm x 1926mm, Corner Post, Plain Ends DG1130 Pine,70mm x 45mm x 1130mm, Double Groove, Plain End
[1]
DG1217A1 Pine, 70mm x 45mm x 1217mm, Double Groove, Apex Angle top.
[2]
SG1926A1 Pine 70 x 45 x 1926mm, Single Groove. Miter Top
[4]
DG1926 Pine 70x45x1926mm, Double Groove Plain ends
[240]
PS32CSK, Phillips Screw #6 x 32mm, Countersunk. Panel Fixing to Frame
Door Assembly
[2]
Door Assy, Door pre assembled

V5—2023 Eastwood [8x12]
[1]
WF-Assy, Painted Window frame
[assembled]
[12]
BH20 MO/SM, Fix WF Assy to WP1130 Opening
WALL —TOP PLATE
[1] [2]
SG1130T2, Pine,70mm x 45mm x 1130mm, Single Groove, Tenon Ends. DG295T2, Pine,70mm x 45mm x 295mm, Double Groove, Tenon Ends.
DG1740A2 , Pine,70mm x 45mm x 1740mm, Double Groove, Miter Ends. DG1130T2, Pine,70mm x 45mm x 1130mm, Double Groove, Tenon Ends.
[8]
[2]
WALL - PANELS
[7]
P1130, Weathertex Panel 1130 x
[1]
WP1130, Window Panel 1130 x 1824 x 9.5mm,
[2]
P295, Weathertex Panel 295 x
OPENING WINDOW FRAME [1]

V5—2023 Eastwood [8x12]
FACIA
[4] [12] [24] [12]
F1500, Painted Facia, 100 x 19 x 1500mm, 22.5
Degree.
FB173, Painted Block 70 x 45
x 173mm, Facia Spacing Block
PS32, Phillips Csk Screw #6
x 32mm Treated Pine, Fix
F1500 to FB145 .
BS100, Bugle Baen Screw
100mm Galvanized, Fix
FB140 to Gable.
Note: MO/SM = Monument / Surfmist
ROOF—Gable Frame
[1]
DG421A Pine 70 x 45 x 421mm, Apex
angle cut
[4]
SG1299A, Pine, 70 x 45 x 1299mm, Single Groove Angled cut (x4)
[44]
PS32CSK, Phillips Screw #6 x
32mm, Countersunk. Panel Fixing
to Door Frame
[2]
GPL, Gable Panel Le, 1095 x 454 x 9.5mm, 22.5 Degree Pitch
[2]
GPR, Gable Panel Right, 1095 x 454 x 9.5mm, 22.5 Degree Pitch
ROOF FRAME
[8]
RF1734, Roof Frame, Pine 70 x 45 x 1734mm.
[8]
RF1125, Roof Frame, Pine 70 x 45 x 1125mm.
[4]
LP1096, Lock Plate 70x45x1096mm
[2]
CT-A, Collar Tie 720mm
[12]
RS1400 MO/SM, 6 Rib Roof Sheet
1400mm.
[3]
RC1520 MO/SM, Ridge Cap (A)
1520mm .
[76]
BS75, Baen Screw 75mm
Galvanized.
[6]
CH1520 MO/SM, Channel 1520mm.
[116]
RS50MO/SM, Roofing Screw, #8 x
50mm Neoprene Sealing.
[22
RD-AS2MO/SM, Rivet
AS2.
[12]
PS32CSK, Phillips Screw #6 x
32mm, Countersunk. CT-A Fixing

V5—2023 Eastwood [8x12]
MISCELLANEOUS
[1] TU MO/SM, Paint Touchup
Monument / Surfmist 500ml
[1] Sil-MO/SM, Silicone sealant 300ml –
coloured
FURNITURE
[1] [4] [1]
THB, “T” Handle Black with
fixings, Keys and Locking
Quadrant
TH150B, “T” Hinge 150mm,
Black with fixings
DS1820x90, Doorstop, Wethertex Panel 1820 x 90 x 9.5mm
[2]
BB100SS, Barrel Bolt, SS, 100mm
plus Hinge Screws [12]
[20]
FB20MO/SM, Sch Screw #6 x
20mm, Flat Buon Head, DS Fixing to
Door (x8)
[1]
DST1800, Door Stop Top, Weathertex 1800 x 83mm
Anchor Kit [**Not issued if Heavy Floor is oponed]
[11] [11] [22]
BKT6040G, Bracket 60mm x 40mm wide,
Electro-Galvanised.
CS650, Concrete screw 6mm x 50mm. RS25, Roofing Screw 25mm

V5—2023 Eastwood [8x12]
WALL CONSTRUCTION—Frame & Panel
MATERIAL SELECTION - Pre-select top plate and upright components for assembly, mber is a natural material, selecng
best the best side of components will help the aesthecs of the finished shed.
1
PRE-DRILL - 3mm
CP1926 [4] DG1926 [4] SG1926A [2]
DG1130 [1]
DG1217A [1]
SG1740A2 [1]
SG1130T2 [8] DG1130T2 [2]
DG295T2 [2]
Drill internal webs only

V5—2023 Eastwood [8x12]
or
FB20, 4 x 2
[8]
FS1130
[1]
[2]
SG1130T2
[4x2]
FB20 MO/SM
[2]
DG1130T2
[16]
PS32CSK
[7]
P1130x1824
NOTE: Window posion in shed, will determine Top Plate configuraon.
If to be on the Back wall [Opposite doors]. DG1130T2 should be
fied.
If to be placed in side walls SG1130T2 is required.
Back
2
Wall Panel Preparaon

V5—2023 Eastwood [8x12]
or
18mm
PS32CSK, 8 x 2
2 x Single Groove Top plate
[Back Wall]
6 x Double Groove Top plate
[Side Walls]
Overall height of panels should be equal to vercal beams [1926mm].
CP1926 or DG1926 can be used as a gauge to ensure ideal panel height of
the top plate component.

V5—2023 Eastwood [8x12]
PS32CSK
FB20 MO/SM
Note: Front Panel Groove is offset. Check
Orientaon before fixing Top Plates.
[2] [2] [6]
DG295T2 FS295T2 FB20 MO/SM
[6]
PS32CSK
[2]
P295x1824
Wall Panel Preparaon
Overall height of panels should be equal to vercal beams [1926mm].
CP1926 or DG1926 can be used as a gauge to ensure ideal panel height of the top plate component.

V5—2023 Eastwood [8x12]
[1] [1] [2]
Panel Assy Or WP Assy CP1924 PS32CSK
Note: Layout Lines
18mm
2mm Gap
Construct a panel with Corner
post on Right Rear face
[as per image >]
With SG top Rail [for Side wall]

V5—2023 Eastwood [8x12]
[1] [4]
Panel Assy + DG Top PS32CSK
[1]
Panel Assy + SG Top
DG Top Plate
SG Top Plate

V5—2023 Eastwood [8x12]
[1] [1] [4]
DG1130 DG1217A1 PS32CSK
Angle cut to TOP
FB32CSK [4]

V5—2023 Eastwood [8x12]
[1] [1] [4]
Panel Assy [DG Top] CP1924 PS32CSK
PS32CSK [4]

V5—2023 Eastwood [8x12]
[2] [1] [10]
Panel Assy [SG Top]
[Alt 1 WP Assy]
CP1924 PS32CSK
[2]
DG1926
PS32CSK [10]

V5—2023 Eastwood [8x12]
9 [3]
[1] [10]
Panel Assy [SG Top]
[Alt 1 WP Assy]
CP1924 PS32CSK
[2]
DG1926
PS32CSK [10]
Opposite Wall hidden for clarity

V5—2023 Eastwood [8x12]
PS32CSK
Rear panels hidden for clarity
[2] [4]
Front Panel Assy PS32CSK

V5—2023 Eastwood [8x12]
Rear of Door opening shown. Some assemblies hidden for clarity.
PS32CSK

V5—2023 Eastwood [8x12]
11
Door Head
FB20MO/SM [13]
[1]
SG1740A2
[14]
FB20MO/SM
[1]
DST1800