Installation
Casters
Side Handle
How to Use
2NOVEMBER 2023
SS-10427
11 DRAWER ROLLER
TOOL CHEST
/ ' / '
§�
0
0
0
t M6
0
/ ' / '
§�
0
0
0
t M6
0
/ ' / '
§�
0
t M6
0
/ ' / '
§�
0
0
0
t M6
0
/ ' / '
§�
0
0
0
t M6
0
• Please remove package and take out caster box and side handle box from drawers.
• Please take out top and drawer mats and lock the cabinet.
• Check all accessories carefully. If you find anything damaged or missing, please contact the store you purchased
from or our customer service centre.
• Please turn the cabinet upside down
with the help of two or more people.
• Swivel casters should be on one side
and make sure M8 bolts are tightened
with a 12mm wrench.
• Attach side handle on swivel casters
side and tighten M6 bolts.
• Please notice ‘ON’ and ‘OFF’ are stamped on casters.
• When locking, you can push down ‘ON’ side and confirm it does not move.
• Please lock two swivel casters together.
• Push down ‘OFF’ sides to unlock the casters.
REMOVE DRAWERS
• Open the drawer and check the levers of ball bearing slides.
• Push down on the upward lever and push up on the downward lever
at the same time and pull out the drawer.
INSTALL DRAWERS
• Align the drawer rails with rails on cabinet and push it in.
• Pull out and push in the drawer for several times to make sure it is
running smoothly.
/ ' / '
§�
0
0
0
t M6
0
Turn cabinet upside down.
