Stryker Premier 4400-603-000 User manual

www.stryker.com 4400-603-900 REV F 1
Premier Bedside Stand, 3-Drawer - Model 4400-603-000
19.4
18.50
31.0
18.0
N
E
D
G
F
J
A
C
B
M
H
L
ASSEMBLY METHOD
The Stryker Med/Surg Bedside Stand is constructed using a locking cam and dowel pin arrangement.
To dismantle the unit, use a #2 Phillips screwdriver to unlock each cam by rotating the cam in a
counter-clockwise direction.
Note: The product serial number label is located on the back of the unit
UNLOCK
LOCK
See Table
on Page 2
See Table
on Page 2
D
G
E
F
B
C
A
4400-508-100
4400-603-001

24400-603-900 REV F www.stryker.com
3800 E. Centre Ave., Portage, MI 49002
[phone] | 2013/10 F.1
Premier Bedside Stand, 3-Drawer - Model 4400-603-000
Bedside Stand Common Components (4400-603-001)
Item Part Number Part Name Qty.
A 4400-508-100 Case (see Case Assembly) 1
B 3100-200-208 Drawer Liner 3
C 3150-001-200 Caster 4
D 3100-052-733 Dowel Pin 6
E 3100-052-732 Cam 6
F 0020-022-000 Wood Screw 24
G 4400-500-205 L-Bracket 3
H 4400-600-203 Drawer Frame 3
J 3100-052-737 Plastic Vent 1
L 4400-600-204 Drawer Slide (Set of 2) 3
M 4400-009-100 Cleaning / Serial Number Label 1
N 0020-021-000 Wood Screw 28
Standard Configuration
Part Number Part Name Qty.
4400-608-101
4400-608-104
Drawer Front
Cont. Pull Dwr. Front
1
1
Top Panel Option
Part Number Part Name Qty.
4400-200-210 Solid Spill Cont. Top 1
3100-200-210 Premier Top 1
Key Lock Option
Part Number Part Name Qty.
4400-500-300 Lock 1
4400-608-102 Top Drawer Front 1
Slam Lock Option
Part Number Part Name Qty.
4400-500-301 Lock 1
4400-608-103 Top Drawer Front 1
Key Lock Option with Continuous Pull
Part Number Part Name Qty.
4400-500-300 Lock 1
4400-608-105 Top Drawer Front 1
Slam Lock Option with Continuous Pull
Part Number Part Name Qty.
4400-500-301 Lock 1
4400-608-106 Top Drawer Front 1
Hardware
Part Number Part Name Qty.
4400-500-208 Brass Pull 3
4400-600-207 Chrome Pull 3
DISINFECTION PROCEDURE
The Center for Disease Control recommends a 1:4 mixture of
bleach and water for disinfection. Thoroughly rinse the solution
from the product surface. If other hospital-grade cleaning agents
are used, follow the instructions provided by the cleaning solution’s
manufacturer. Wipe the surface with a soft, dry cloth to remove any
moisture.
WARRANTY
Stryker warrants this product for one (1) year under normal use and
proper care. For one year from date of shipment, Stryker will repair
or, at our option, replace defective merchandise free of charge (parts, labor, and shipping included).
Note: LIFETIME warranty on metal drawer frames and glides.
Case Assembly (4400-508-100)
Item Part Number Part Name Qty.
A 4400-508-118 Bottom Panel 1
B 4400-500-201 Back Panel 1
C 4400-500-216 Right SIde Panel 1
D 4400-500-217 Left Side Panel 1
E 3100-052-733 Dowel Pin 16
F 3100-052-732 Cam 16
G 4400-500-204
4400-500-224
4400-500-223
Brace (No Lock)
Brace (Slam Lock)
Brace (Key Lock)
1
1
1