Stryker FL23SE User manual

MedSurg Bed
Model FL23SE
(Electric)
Maintenance Manual
2008/08 72-1048E MM FL23SE REV A www.stryker.com
For Parts or Technical Assistance:
USA: 1-800-327-0770 (option 2)
Canada: 1-888-233-6888

www.stryker.com72-1048E MM FL23SE REV A 3
Table of Contents
Introduction...............................................................................7
Intended Use ..........................................................................7
Product Illustration ......................................................................7
Specifications .........................................................................8
Warning / Caution / Note Definition ..........................................................9
Symbols ................................................................................10
Electrical Service Information ................................................................11
Connection Diagram ...................................................................11
Preventative Maintenance ...................................................................13
Annual Checklist ......................................................................13
Cleaning................................................................................14
Bed Cleaning .........................................................................14
Mattress Care ........................................................................14
Troubleshooting Guide......................................................................15
Quick Reference Replacement Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Operation Guide ..........................................................................19
Maintenance Procedures ................................................................19
Static Discharge Precautions .............................................................19
Service Information ........................................................................20
Siderail Replacement ...................................................................22
Half-Length Rail Replacement.............................................................22
Half-Length Siderail Assembly Replacement ..................................................24
Transfer Plate Replacement ..............................................................25
Full-Length Siderail Pivot Tube Replacement ..................................................27
Full-Length Rail Replacement ............................................................28
Full-Length Siderail Assembly Replacement ..................................................29
Full-Length Siderail Release Handle Replacement ..............................................30
Full-Length Siderail Locking Hook Replacement ................................................31
Foot End Control Panel Replacement .......................................................32
Foot End Casing Connector Replacement (Optional) ............................................33
Foot Board Control Panel Replacement (Optional) ..............................................34
Foot Board Connector Replacement (Optional) ................................................35
Siderail Control Panel Membrane Replacement ................................................36
Mattress Support Replacement ............................................................37
Foot Section Replacement ...............................................................38
Thigh Section Replacement ..............................................................39
Seat Section Replacement ..............................................................40
Head Section Replacement...............................................................41
Fowler Actuator Replacement .............................................................43
Knee Gatch Motor Replacement ...........................................................45
Bed Lift Motor Replacement ..............................................................47

4 72-1048E MM FL23SE REV A www.stryker.com
Table of Contents
Service Information (Continued)
Toroidal Transformer Replacement (International Series Models) ...................................49
Motor Control Board Replacement .........................................................50
Power Connector and Fuse Replacement ....................................................51
Auto Contour Micro Switch Replacement (Optional) ............................................52
CPR Micro Switch Replacement (Optional) ...................................................54
CPR Activation Cable Replacement (Optional) .................................................56
CPR Pneumatic Cylinder Replacement (Optional) ..............................................57
Brake/Steer Pedal Replacement ..........................................................58
Fifth Wheel Caster Replacement (Optional) ..................................................59
Fifth Wheel Assembly Replacement (Optional) ................................................60
Fifth Wheel Swing Arm Assembly Replacement (Optional) ........................................61
Bed Caster Replacement ................................................................62
Brake Rod Replacement ................................................................64
Assembly Drawings
Base ...............................................................................65
Wheel Covers ........................................................................66
Brake Mechanism without Fifth Wheel.......................................................68
5” Casters without Fifth Wheel ............................................................70
6” Casters without Fifth Wheel ............................................................71
Brake Mechanism with Fifth Wheel .........................................................72
6” Casters with Fifth Wheel ..............................................................74
Fifth Wheel ..........................................................................75
Bed Lift Mechanism ....................................................................78
Frame ..............................................................................80
120V Electric System ...................................................................82
100V Electric System ...................................................................86
International Electric System..............................................................87
200V Electric System ...................................................................92
220V Electric System ...................................................................93
240V Electric System ...................................................................94
Auto Contour Positioning.................................................................96
Bed Lift Motors Screw Covers.............................................................98
Mattress Support .....................................................................100
Foot End Control Panel.................................................................102
Control Panel on Frame for Full-Length .....................................................104
Foot End and Foot Board Control Panels ....................................................106
Foot End and Foot Board Control Panels - Full-Length Siderail ....................................108
Without CPR Emergency Release .........................................................110
CPR Emergency Release ............................................................... 112
Stickers French/English ................................................................116

www.stryker.com72-1048E MM FL23SE REV A 5
Table of Contents
Assembly Drawings (Continued)
Stickers English/Spanish ...............................................................118
BNQ Certification ..................................................................... 120
120V Auxiliary Outlet .................................................................. 12 2
Night Light .......................................................................... 124
Cable and Phone Plug 1/4” ............................................................. 12 5
Power Cord with 90° North American Grade Plug .............................................. 131
Power Cord with Straight Molded North American Hospital Grade Plug .............................. 131
Power Cords and Plugs ................................................................ 13 2
Full-Length Retractable Siderail........................................................... 13 3
Retractable Full-Length Siderail without Pendant .............................................. 13 7
PVC Protector for Full-Length Siderail ...................................................... 141
Retractable Half-Length Siderails with Fixed Control ............................................ 142
Retractable Siderails with Removable Controls ................................................ 148
PVC Protector - Half-Length Retractable Siderails ............................................. 153
Fixed Control Panel without Nurse Call ..................................................... 15 4
Fixed Control Panel with Nurse Call ........................................................ 15 5
Control with Nurse Call Normally Open (N.O.) ................................................ 156
Control with Nurse Call Normally Closed (N.C.) ............................................... 157
Post Set............................................................................ 158
Melamine Boards without Control Panel..................................................... 15 9
MDF Laminated Boards without Control Panel ................................................160
MDF Laminated Boards with Control Panel .................................................. 161
Solid Wood Board without Control Panel ....................................................163
Solid Wood Boards with Control Panel......................................................165
Solid Core Boards with Flat Top and Control Panel.............................................167
Optional Bed Accessories ..................................................................169
Removable I.V. Pole - FDTSH ............................................................ 17 0
Bed Extender - FA64152 ................................................................ 171
Emergency Crank - FA64161............................................................. 17 4
Removable Two-Sided, Two Function Pendant Control - FA64160 .................................. 175
P&D Two-Function Pendant Control - FA64155................................................ 17 6
Half an Inch Diameter Stryker Removable I.V. Pole - FA64135 ..................................... 17 7
Half-Length Siderail Protective Pads - DM64232 .............................................. 178
Full-Length Siderail Protective Pads - DM64176 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Half-Length Siderail Protective Pads - DM64233 .............................................. 17 9
Full-Length Siderail Protective Pads - DM64178 ............................................... 17 9
One Inch Diameter Removable I.V. Pole - FA61002-G ...........................................180
Oxygen Bottle Holder - FA64036-G ........................................................ 181
Upright Oxygen Bottle Holder - FA64117 ....................................................182
Overhead Trapeze - FA64145 ............................................................ 184

6 72-1048E MM FL23SE REV A www.stryker.com
Table of Contents
Optional Bed Accessories
Monitor Tray - FA64153.................................................................186
One Inch Diameter Fixed I.V. Pole - FA64157 ................................................. 187
Recycling Passport .......................................................................188
Warranty...............................................................................190
Limited Warranty .....................................................................190
To Obtain Parts and Service .............................................................190
Service Contract Coverage ..............................................................190
Service Contract Programs ..............................................................191
Return Authorization ...................................................................191
Damaged Merchandise.................................................................191
International Warranty Clause ............................................................191

www.stryker.com72-1048E MM FL23SE REV A 7
Return To Table of Contents
Introduction
INTENDED USE
This manual is designed to assist you with the maintenance of Stryker Model FL23SE Electrical MedSurg Bed. Carefully
read this manual thoroughly before using the equipment or beginning maintenance on it. To ensure safe operation of this
equipment, it is recommended that methods and procedures be established for educating and training staff on the safe
operation of this bed.
PRODUCT ILLUSTRATION
RESTRAINT STRAP
LOCATIONS
HALF-LENGTH
SIDERAIL
(
OPTIONAL
)
FOOT SECTION
FOOTBOARD CONTROL
PANEL (OPTIONAL)
EMERGENCY CRANK
OPENINGS
FOOT END
CONTROL PANEL
DRAINAGE BAG
HOOK
BRAKE/STEER
PEDAL
5TH WHEEL
(OPTIONAL)
WHEEL COVER
(OPTIONAL)
SIDERAILRELEASE
LEVER
MAIN SWITCH
(POWER
CONNECTOR)
STORED
EMERGENCY
CRANK
(
OPTIONAL
)
BUMPER
HEAD SECTION
CPR RELEASE
HANDLE
(
OPTIONAL
)
FIXED SIDERAIL
CONTROL PANEL
(OPTIONAL)

8 72-1048E MM FL23SE REV A www.stryker.com
Return To Table of Contents
SPECIFICATIONS
Safe Working Load
Note: Safe Working Load indicates the sum
of the patient, mattress, and accessory
weight.
500 lbs 227 kg
Overall
Length/Width
Half-Length Siderails Raised
Full-Length Siderails Raised
90,4” x 41,3”
90,4” x 39,9”
229,6 x 104,9 cm
229,6 x 101,3 cm
Weight with Head/Foot Boards 390 lbs 177 kg
Patient Sleep Surface 35” x 78” 88,9 x 198,1 cm
Recommended
Mattress Size
Length/Width 35” x 78” or 80” 88,9 x 198,1 cm
or 203,2 cm
Maximum
Thickness
BNQ
Standard
Bed with diameter
12.7 cm (5”) casters 6” 15,2 cm
Bed with diameter
15.2 cm (6”) casters 5” 12,7 cm
Non-BNQ Standard 5” 12,7 cm
Minimum/
Maximum
Bed Height
With diameter 12,7 cm (5”) casters 11,75” to 29” 29,8 to 737 cm
With diameter 15,2 cm (6”) casters 12,75” to 30” 32,4 to 76,2 cm
Fowler Angle 0° to 62°
Knee Gatch
Angle
With Auto Contour 0° to 25°
Without Auto Contour 0° to 32°
Trendelenburg/Reverse Trendelenburg +17° to -17°
Environmental
Conditions
Transport and Storage
Ambient Temperature•
Relative Humidity•
Atmospheric Pressure•
-40° to 158°F
10 to 100%
500 to 1060 hPa
-40° to 70°C
Operating
Ambient Temperature•
Relative Humidity•
Atmospheric Pressure•
50° to 104°F
5 to 95% without condensation
700 to 1060 hPa
10° to 40°C
Electrical
Requirement
Complies with the following standards:
CSA C22.2 No. 601.1, UL 60601-1,
IEC 60601-1, 60601-2-38 and BNQ
6641-120 : 2003.
100V~, 50-60Hz, 7.5A - Two 250V, 10A Fast Acting Fuses
120V~, 50-60Hz, 4A (9.8A with 120V Optional Auxiliary
Outlet) - Two 250V, 10A Fast Acting Fuses
200V~, 50-60Hz, 3.2A - Two 250V, 6.3A Slow Blow Fuses
220V~, 50-60Hz, 2.9A - Two 250V, 6.3A Slow Blow Fuses
240V~, 50-60Hz, 2.7A - Two 250V, 6.3A Slow Blow Fuses
Stryker reserves the right to change specifications without notice.
Specifications listed are approximate and may vary slightly from unit to unit or by power supply fluctuations.
*This device has a 10% duty cycle.
Note
The Safe Working Load for the BNQ beds is of 390 lbs (177 kg).
Introduction

www.stryker.com72-1048E MM FL23SE REV A 9
Return To Table of Contents
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION, and NOTE carry special meanings and should be carefully reviewed.
WARNING
Alerts the reader about a situation, which if not avoided, could result in death or serious injury. It may also describe
potential serious adverse reactions and safety hazards.
CAUTION
Alerts the reader of a potentially hazardous situation, which if not avoided, may result in minor or moderate injury to the
user or patient or damage to the equipment or other property. This includes special care necessary for the safe and
effective use of the device and the care necessary to avoid damage to a device that may occur as a result of use or
misuse.
Note
This provides special information to make maintenance easier or important instructions clearer.
Introduction

10 72-1048E MM FL23SE REV A www.stryker.com
Return To Table of Contents
Symbols
Type B Equipment: Equipment providing a particular degree of protection against electric shock,
particularly regarding allowable leakage current and reliability of the protective earth connection.
Class 1 Equipment: Equipment in which protection against electric shock does not rely on basic insulation
only, but which includes an additional safety precaution in that means are provided for the connection of
the equipment to the protective earth conductor in the fixed wiring of the installation in such a way that
accessible metal parts cannot become live in the event of a failure of the basic insulation.
Warning, Refer to Accompanying Documentation
Alternating Current
Protection from liquid splash
Dangerous Voltage Symbol
Protective Earth Terminal
Medical Equipment Classified by Underwriters Laboratories Inc. with respect to Electric Shock, Fire,
Mechanical and Other Specified Hazards Only in Accordance with UL 60601-1, First Edition (2003) and
CAN/CSA C22.2 No. 601.1-M90 with updates 1 and 2.
Safe Working Load Symbol
In accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE), this symbol indicates that the product must not be disposed of as unsorted municipal waste,
but should be collected separately. Refer to your local distributor for return and/or collection systems
available in your country.
Potential Equalization Symbol
~
IPX4
1.6 SYMBOLS
10A 250V
1.6 SYMBOLS
6.3A 250V
Fuse rating for bed with 200V~, 220V~ and 240V~ electric systems.
Fuse rating for bed with 100V~ and 120V~ electric systems.

www.stryker.com72-1048E MM FL23SE REV A 11
Return To Table of Contents
Electrical Service Information
CONNECTION DIAGRAM

12 72-1048E MM FL23SE REV A www.stryker.com
Return To Table of Contents
Electrical Service Information
CONNECTION DIAGRAM (CONTINUED)

www.stryker.com72-1048E MM FL23SE REV A 13
Return To Table of Contents
______
______
______
______
______
______
______
______
______
______
______
______
______
______
______
______
______
______
______
All fasteners secure.
Inspect for excessive wear the oil-impregnated bronze shoulder spacers found at the bed hinge points.
Replace as needed. Do not lubricate these spacers.
On both sides of the bed, depress fully down the side of the pedal identified with a red sticker and ensure
that the brakes are applied and the bed immobilized. Toggle the pedal to neutral and ensure the brakes
are released.
On both sides of the bed, depress fully down the side of the pedal identified with a green sticker and ensure
that the steer mode (fifth wheel (optional) or bed wheel) is engaged. Toggle the pedal to neutral and ensure
that the steer mode disengages.
Siderails move smoothly and latch properly in high position.
Ensure that each control of the inner and outer head siderail control panels (optional) and those of the
removable pendant control (optional) are working properly.
All controls of the foot end panel and those of the foot board panel (optional) working properly, including
Trendelenburg and lockout LED’s.
Fowler and Knee Gatch (if raised) flatten and the Fowler control motor resets itself automatically when the
two CPR handles (optional) are pulled until Fowler is flattened. Wait about 30 seconds, the time for the
Fowler motor to reset itself, and then raise the Fowler to ensure that the resetting of the motor has indeed
occurred.
Verify the Fowler, Knee Gatch and Hi-Lo movements to ensure that the motion interrupt switch integrated
to the four electric actuators is operating properly.
Auxiliary outlet (option available only with 120V beds) working properly.
Night light (optional) working properly.
Head end bumpers tightly secured to frame and working properly.
No rips or cracks in mattress cover.
Power cord is not frayed. Replace if the protective sleeve is cut or torn.
No cables worn or pinched.
All electrical connections tight.
All grounds secured to the frame.
All casters roll properly. Check caster for cuts, wear, etc.
Measure current leakage and grounding continuity of the bed and the optional auxiliary outlet. Check with
our Technical Service department for the acceptable values.
Bed Serial Number:
Completed by: _______________________________________ Date: _________________
Preventative Maintenance
WARNING
Use only replacement parts provided by Stryker.
ANNUAL CHECKLIST

14 72-1048E MM FL23SE REV A www.stryker.com
Return To Table of Contents
Cleaning
BED CLEANING
CAUTION
Do not use harsh cleaners, solvents or detergents. Equipment damage could occur.• Do not steam clean, hose off
or ultrasonically clean the bed. Do not immerse any part of the bed. The bed electrical parts may be damaged
by exposure to water.
Germicidal disinfectant, used as directed, and/or Chlorine Bleach products are not considered as mild detergents.•
These products are corrosive in nature and may cause damage to your bed if used improperly. If these types of
products are used, ensure the beds are wiped with clean water and thoroughly dried following cleaning. Failure to
properly rinse and dry the beds will leave a corrosive residue on the surface of the bed, possibly causing premature
corrosion of critical components. Failure to follow the above directions when using these types of cleaners may void
the product’s warranty.
Procedure:
Hand wash all surfaces of the bed with a soft cloth moistened with a solution of lukewarm water and a mild detergent.
Wipe the bed clean and dry thoroughly to avoid build up of cleaning solution.
MATTRESS CARE
WARNING
Inspect the mattress after each use. Discontinue use if any cracks or rips, which may allow fluid to enter the mattress,
are found in the mattress cover. Failure to properly clean the mattress, or dispose of it if defective, may increase the risk
of exposure to pathogenic substances and may bring about diseases to the patient and user.
Inspection
Implement local policies to address regular care, maintenance, and cleaning of mattresses and covers. The cover•
cleaning procedure can be found below and on the bed label.
Inspect mattress cover surface, interior and exterior, as well as zip fasteners and cover inner surface if mattresses•
have zip fasteners, regularly for signs of damage. If the mattress cover is heavily stained or soiled, or is torn, remove
the mattress from service.
Cleaning
Stains: Wash with lukewarm water using a mild detergent. Rinse with water and let dry. For tough stains, use bleach
diluted with ten parts of water.

www.stryker.com72-1048E MM FL23SE REV A 15
Return To Table of Contents
Problem/Failure Recommended Action
No power to bed Is the bed power switch at the head end of the bed•
turned on?
Is the power cord connected to the power connector•
and plugged into the wall outlet?
Is the power cord severed? Replace if so.•
Are the two fuses inside the power connector still•
operational (see pg. 51)?
Verify power at the wall outlet.•
No bed up or down motion when:
The removable pendant control (optional) is used.•
The foot board command is used.•
Is the Hi-Lo lockout activated (LED off)? If so, deactivate•
it (LED on).
Is the cable of the removable pendant control (optional)•
properly connected to the bed connector under the
mattress support?
Check points of the “No power to bed” problem•
described above.
No Fowler up or down motion when:
The siderail (optional) or removable pendant control•
(optional) is used.
The foot board command is used.•
Is the Fowler lockout activated (LED off)? If so, deactivate•
it (LED on).
Is the cable of the siderail control panel (optional) or•
of the removable pendant control (optional) properly
connected to the bed connector under the mattress
support?
Check points of the “No power to bed” problem•
described above.
The Fowler does not fully raise. This situation arises when the CPR emergency release
(optional) is used to partially lower the Fowler. The use
of the CPR for this purpose creates a situation where the
Fowler motor is out of sync with the actual position of the
Fowler. To correct the situation:
Lower the Fowler• completely using a CPR handle or
the Fowler electric control to enable the Fowler motor
to reset itself and thus synchronize its course with the
actual position (flatten) of the Fowler.
No Knee Gatch up or down motion when:
The siderail (optional) or removable pendant control•
(optional) is used.
The foot board command is used.•
Is the Knee Gatch lockout activated (LED off)? If so,•
deactivate it (LED on).
Is the cable of the siderail control panel (optional) or•
of the removable pendant control (optional) properly
connected to the bed connector under the mattress
support?
Check points of the “No power to bed” problem•
described above.
Troubleshooting Guide

16 72-1048E MM FL23SE REV A www.stryker.com
Return To Table of Contents
Problem/Failure Recommended Action
The positioning mechanisms of the Fowler, and/or
the Knee Gatch, and/or the bed height operate with
difficulty.
Check the four actuator screws to verify their lubrication•
condition and apply grease if needed (see pg. 20).
No Auto Contour (optional) motion. Is the Knee Gatch lockout activated (LED off)? If so,•
deactivate it (LED on).
Check and replace if needed the two Auto Contour limit•
switches (see pg. 52).
Improper operation of the CPR emergency release
(optional): Knee Gatch does not lower and/or the Fowler
actuator does not reset.
Check and replace if needed the two CPR mechanism•
limit switches (see pg. 54).
Troubleshooting Guide

www.stryker.com72-1048E MM FL23SE REV A 17
Return To Table of Contents
Part Name Part Number
Electric/Electronic Components
Motor Control Board QDF23-0315
Micro Switch 1325P003 / QDF9159
Fuse - Fast Acting 10A, 250V (100/120V) QDF8078
Fuse - Slow Blow 6.3A, 250V (200/220/240V) QDF8068
Power Cord with Straight North American Molded Plug QDF8066
Night Light (Optional) QDF9539
5A Circuit Breaker for Auxiliary Outlet (optional) QDF9025
Hi-Lo Actuator 23-0702
Head Section Actuator 23-0335
Thigh Section Actuator 23-0336
Toroidal Transformer - International Series Beds QDF14-1160
Stand-Off Pins: Motors Control Board QP23-0735
Strain-Relief Bushing QDF9541
Support for the Foot End Control Panel Membrane QP17-0127-07
Foot End Control Panel Membrane QDF17-0693 / QDF17-0180
Siderail Components
Protective Cap QDFP1514
Transfer Plate - Half-Length Siderail 23-0777G / 23-0778G
23-0817G / 23-0818G
Left Inner Membrane without Nurse Call
Right Inner Membrane without Nurse Call
QDF23-0392 / QDF23-0393
Right Inner Membrane with Nurse Call
Left Inner Membrane with Nurse Call
QDF23-0396 / QDF23-0397
Left Outer Membrane QDF23-0405
Right Outer Membrane QDF23-0406
PVC Protector for Painted Head Half-Length Siderails 23-0476
PVC Protector for Painted Foot Half-Length Siderails 23-0478
PVC Protector for Painted Full-Length Siderails 23-0641
Note
The parts and accessories listed on this page are all currently available for purchase. Some of the parts identified on
the assembly drawing parts in this manual may not be individually available for purchase. Please call Stryker Customer
Service USA: 1-800-327-0770 (Option 2) or Canada: 1-888-233-6888 for availability and pricing.
Quick Reference Replacement Parts List

18 72-1048E MM FL23SE REV A www.stryker.com
Return To Table of Contents
Part Name Part Number
Mattress Support Components
Lateral Mattress Retainer QP14034-07
I.V. Pole Holder QP17-0121
Caster
6” with Lock Mechanism RD25038807
6” without Lock Mechanism RD25049307
6” with Steer Mechanism RD25049607
5” with Lock Mechanism RD25049407
5” without Lock Mechanism RD25039107
5” with Steer Mechanism RD25049507
Fifth Wheel Mechanism 5” Caster (Optional) RL5
Base Components
Rue Ring Cotter Diameter 3/8” QDF7878
Green Sticker - Fifth Wheel QE71-0496
Red Sticker - Brake QE71-0511
Wheel Cover - Right (Optional) QP28-0299-07
Wheel Cover - Left (Optional) QP28-0300-07
Brake/Steer Pedal QP23-0627
Velcro Fastener 25-0550
Miscellaneous
Grey Spray Paint DDCAP-GSP
Shoulder Spacer QDF17-0020
Nylon Cable Tie QDF9518
Quick Reference Replacement Parts List

www.stryker.com72-1048E MM FL23SE REV A 19
Return To Table of Contents
MAINTENANCE PROCEDURES
WARNING
Always unplug the bed power cord when cleaning or servicing the bed.•
To prevent injury when working under the bed with the bed in the high position, always place blocks under the Hi-Lo•
levers and apply the brakes. Always unplug the bed power cord from the wall outlet when servicing or cleaning the
bed.
STATIC DISCHARGE PRECAUTIONS
The electronic circuits of the bed are protected from static electricity damage only while the bed is assembled. It is
extremely important that all service personnel always use adequate static protection when servicing the electronic
components of the bed.
STATIC PROTECTION EQUIPMENT
The necessary equipment for a proper static protection is:
1 static wrist strap•
1 grounding plug•
1 test lead with a banana plug on one end and an alligator clip on the other.•
STATIC PROTECTION PROCEDURE
Unplug the bed power cord from the wall outlet.1.
Insert the grounding plug into a properly grounded hospital grade wall receptacle. Plug the banana plug of the test2.
lead into the receptacle on the grounding plug. Connect the alligator clip on the other end of the test lead to a
ground point on the bed.
Place the static control wrist strap on your wrist. Connect the clip at the other end of the wrist strap cord to a ground3.
point on the bed.
GROUNDING DIAGRAM
BED
Operation Guide

20 72-1048E MM FL23SE REV A www.stryker.com
Return To Table of Contents
Service Information
WARNING
Always unplug the bed power cord when cleaning or servicing the bed.•
To prevent injury when working under the bed with the bed in the high position, always place blocks under the Hi-Lo•
levers and apply the brakes. Always unplug the bed power cord from the wall outlet when servicing or cleaning the
bed.
ACTUATOR LUBRICATION
Note
In compliance with the service life requirement of the BNQ 6641-120/2003 standard, this unit was designed maintenance
free with regard to lubrication. However, if the bed is used improperly or cleaned without following the recommendations
set forth in the Maintenance Manual (presence of cleaning detergent on the actuator screws), a lubrication of the
actuator could be necessary.
Tools Required:
No. 2 Phillips Screwdriver•
1/4” Ratchet (with 6” extension) and 5/16” Socket•
Bungee Cords•
OG2 Grease•
Brush•
C
B
Screw Covers Shown Are Optional
Figure 2.2
A
Screw Covers
Shown are Optional