Sune Technology PIP-BMW V4 User manual

Your best partner for better driving
PIP-BMW V4
Specification
For 3/5/6 series, X5, X6
Updated date : 2013.01.31
Model : PIP-BM-STD-V4 / Product code : PIP-BM-1110-008
SUNE TECHNOLOGY ELECTRONIC CO., LTD
No.9, Land 606,Anping Rd., Tainan City 70849 Taiwan
Tel: [phone] Fax:[phone]
Website http://www.sune-tech.com
Shop http://www.carnavi-tech.com
Skype : hsin_han99 or sune_tech
CarNavi-Tech

Contents
2
4
3
5
6
7
2.1.1 DIP switch
2.1.2 DIP switch
2.2 Remote control
2.3 Keypad
2.4 OSD (on screen display)
2.5 FACTORY mode
2.6 Rear view parking guide line
2.7 CAN Wiring & Steering wheel button
8
9
10
11
17
12
13
18
1. Before installation
1.1 Main specification
1.2 Features
1.3 System diagram
1.4 Components
1.5 Exterior
2. SETUP
3.Troubleshooting 19
CarNavi-Tech

1.1 Main specification
3
1. Input Spec. (MULTI VIDEO INTERFACE)
-. 1 x Analog R,G,B (Sync on Green)
-. 1 x CVBS(REAR CAMERA) Input.
-3 x A/V (NTST & PAL) Input.
-. 1 x LCD Input (Car system Input)
2. Output Spec.
-. 2 X CVBS OUTPUT
-. 1 x Audio OUTPUT
-. 1 X LCD OUTPUT(LCD Operation)
-. 4 X Audio Select Output
3. Power Spec.
- Input Power : 8VDC ~ 18VDC
- Consumption Power : 12WATT, Max
4. Mode change
- Input Video skip : able to skip each input source via adjusting DIP switch
- Control by using the remote control
- Able to change a mode by using toggle switch
- Able to change a mode by button on the steering wheel in the car via CAN
CarNavi-Tech

1.2 Features
4
[PIP –A/V mode][PDP –Rear Camera]
- PIP (picture in picture) Function (Only available in 8.8” model)
- Controlling PIP function by “★” button on the steering wheel
(The products which are shipped to Japan are different)
- switching AV source by “ “ on the steering wheel
(The products which are to Japan are different)
- Easier operation with remote control.
- Displaying External AV sources through composite, RGB
- Controlling AV sources (DVD, Navi) by I-DRV –Optional
CarNavi-Tech

1.3 System diagram
5
DISPLAY
(CAR MAIN BOARD)
A/V 1
NAVIGATION Input
(Analog RGB)
CVBS In
(Rear camera)
Car Screen Input
A/V 2
A/V 3
VIDEO
CIRCUIT VIDEO MUX
MCU
Power Input
(+8VDC ~ +18VDC)
POWER
CIRCUIT
Dip S/W
A/V OUT HEADREST
MONITOR
OSD keypad
Or Remote control Switch for source toggle
OEM Navi Button (Can Interface)
Car installation
OEM LCD
(Video out 2
Audio L, R1)
CarNavi-Tech

1.4 Components
6
POWER cable (10P) * 1ea
(HPOWER0005)
MODE cable * 1ea
(HARETC0001)
AV cable * 1ea
(HAVCAB0002)
OR
Keypad * 1ea
(PCBOSD0001)
Ground cable * 1ea
( HGROUN0001)
RGB cable * 1ea
(HNAVIC0004)
LVDS cable(F-TYPE) * 1ea
(HLVDSC0005)
IR cable (8P) * 1ea
(HIRCAB0002)
Remote control * 1ea
(REMOTE0001)
REAR CAMERA POWER cable * 1ea
(HARETC0002)
CarNavi-Tech

1.5 Exterior
7
①MODE
②POWER
③RGB(IN)
④R-CAM
⑤AV(IN/OUT)
⑥LCD-OUT
⑦LCD-IN
⑧KEYPAD/IR
⑩⑥⑦⑧
①③④②
⑨
⑩⑥⑦⑧⑨
⑨DIP S/W
①③④②
Dimension
Horizontal length 154mm
Vertical length 94mm
Height 20mm
⑤
⑤
⑩LED
CarNavi-Tech

2.1.1 DIP switch
8
#PIN Function DIP S/W selection
1 RGB INPUT skip ON : Skipping RGB Mode
OFF : RGB Display
2 A/V 1 skip ON : Skipping A/V 1
OFF : A/V1 Display
3 A/V 2 skip ON : Skipping A/V 2
OFF : A/V2 Display
4 A/V 3 skip ON : Skipping A/V 3
OFF : A/V3 Display
5 Monitor Size ON : 6.5” LCD Setting (Possible to use BMW 1 series)
OFF : 8.8” LCD Setting
6 Type of monitor
(Refer to next page)
ON : Siemens setting (only when to turn on the 5th pin)
OFF : Alpine setting (only when to turn on the 5th pin)
ON : 3 series 2009 year(only when to turn off the 5th pin)
OFF : 8.8” Setting
7 Rear Mode ON : External Rear Camera
OFF : OEM Rear Camera
8 N.C
CarNavi-Tech

2.1.2 DIP switch
9
#PIN
Monitor 5 6
E60 8.8” OFF OFF
E60 Alpine 6.5” ON OFF
E60 Siemens 6.5” ON ON
※DIP S/W Use Example
[BMW E60-6.5” Alpine]
-. Use Input Mode : A/V3(DVD), Navigation (RGB)
-. Rear Camera : When to be installed on CVBS 4
▷DIP S/W : 1 OFF
▷DIP S/W : 2,3 ON (INPUT MODE SKIP)
▷DIP S/W : 4 OFF (enable A/V3)
▷DIP S/W : 5 ON (6.5” Alpine)
▷DIP S/W : 6 OFF
▷DIP S/W : 7 ON (enable CVBS4)
▷DIP S/W : 8 OFF
[E60 8.8”]
[E60 Alpine 6.5”]
[E60 Siemens 6.5”]
[2009 Year 3 series]
CarNavi-Tech

2.2 Remote control
10
Key
Function
POWER
Not for use
PIP
Activating PIP (Picture in Picture)
MENU
OSD implementation
OK
Making a selection
▲
Move upward
▼
Move downward
◀
Move leftward, press 2 seconds long-Factory
mode implementation
▶
Move rightward, press 2 seconds long-Factory
Mode implementation-Factory mode Reset
CarNavi-Tech

2.3 Keypad
11
Key
Function
MENU
OSD Menu, switching to previous mode.
SEL
Selection in menu, switching AV sources.
UP
Move leftward, upward
DOWN
Move rightward, downward
UP+DOWN at once
SAFE MODE implementation
*FACTORY MODE (Interface setting) : Operated by pressing ▲→ ▼→ ▲→MENU of remote or keypad in order.
CarNavi-Tech

2.4 OSD (on screen display)
12
OSD menu : Operated by pressing MENU button of remote control.
Analog RGB mode
Video mode
Analog RGB mode Analog RGB mode
Video modeVideo mode
IMAGE
- BRIGHTNESS
- CONTRAST
- SATURATION
- HUE
- SHARPNESS
- USER IMAGE : To choose a option
among 4 prepared color shade.
OSD
-LANGUAGE : To change the language
displaying while using Touch OSD
(select 1 among English or Chinese)
- TRANS : Transparency control of the OSD
background
- H_POSITION : Horizontal movement of
the OSD window
- V_POSITION : Vertical movement of the
OSD window
UTIL
- FACTORY RESET : To reset all the
values about navigation, DVD screen
to factory default.
(NOT available for reset of the position
value of images, only for functions
inside OSD menu)
CarNavi-Tech

2.5.1 Factory mode
13
*FACTORY MODE : Operated by pressing ▲→ ▼→ ▲→MENU of remote control or keypad in order.
IMAGE
Adjusting the position and the size
of navigation
H-POSITION : moving in horizontal
direction
V-POSITION : moving in vertical
direction
H-SIZE : adjusting the horizontal size
of the navigation
Setup for navigation
UTIL - CAR MODEL
Selecting model of the car
E60 : When to install BMW 5 series
E60_NEW : If not work with E60, Use this
E60_OLD : When there is a offset
problem on E60
E70 : When to install BMW X5 (E70)
UTIL –NAVI MODEL
Definition of the navigation
DEFAULT : 400X234, low definition
Setup for car model
CarNavi-Tech

2.5.2 Factory mode
14
UTIL - FACTORY RESET
Resetting factory mode
YES : resetting factory mode
NO : undoing reset of the factory
mode
UTIL - AVOUT SELECT
Selecting background sound while
navigation is displayed on the
screen
DEFAULT : default, the sound of
previous image before displaying
navigation
DTV : sound of DTV
A/V : sound of A/V source
UTIL - REAR SELECT
Selecting how to detect the rear
view camera
LAMP : Detecting the rear view
camera via rear lamp
(Installer must connect “Rear-C”
cable of the power cable to the
rear lamp of the car.)
CAN : Detecting the rear view
camera via CAN signal
(Installer must connect “CAN” cable
of the power cable to the “CAN”
cable of the car.)
*FACTORY MODE : Operated by pressing ▲→ ▼→ ▲→MENU of remote control or keypad in order.
CarNavi-Tech

2.5.3 Factory mode
15
I-DRI TYPE
-NEW I-DRV –When there is a New I-Drive on the car as
shown below
<2009 Model I-DRIVE> <~2008 Model I-DRIVE>
- OLD I-DRV –When there is a Old I-Drive on the car
as shown below
*FACTORY MODE : Operated by pressing ▲→ ▼→ ▲→MENU of remote control or keypad in order.
※328i, 335i 2009model : OLD I-DRIVE, 5 series : NEW I-DRIVE
CarNavi-Tech

2.5.4 Factory mode
16
I-DRV - AUX
Selecting whether to use I_DRV
AUX
ON/OFF
I-DRV - CONTROL
Selecting whether to use I_DRV
function or not
ON/OFF
I-DRV - REMOTE
Selecting model of navigation and
DMB respectively to control I_DRV
function
PIONEER
ALPINE
*FACTORY MODE : Operated by pressing ▲→ ▼→ ▲→MENU of remote control or keypad in order.
CarNavi-Tech

2.6 Rear view parking guide line
17
Factory Default : DISPLAY - DISABLE
PARK
PARK ENABLE : Selecting whether to display the parking guide line or not on rear gear (default : ON)
PARK SETUP : Adjusting the position of the parking guide line (available in PARK SETUP -> V-POSITION, H-POSITION)
SAFE ENABLE : If your car is connected with CAN cable and it is in ”ON” state, you can NOT watch DVD or A/V
except original image or navigation while driving. At that time the screen get back to the main
(default : OFF)
a. If you want to get to the FACTORY mode, set the gear as rear state
and press “LEFT” button 2 seconds long on the remote control or the keypad. (as shown left top)
b. If you set ‘PARK ENABLE’ as “ON” state, there will be the rear view parking guide line. (as shown right top)
CarNavi-Tech

2.7 CAN Wiring & Steering wheel button
18
Orange+Black:
CAN HIGH
Yellow:
CAN LOW
☆: PIP Mode
: Switching AV source with long press
※The products which are shipped to
Japan are different
CarNavi-Tech

CarNavi-Tech

CarNavi-Tech