Sune Technology QNAVI2-STD-AUDI-A3 User guide

Your best partner for better driving
Update Date
2013.06.18
Model
QNAVI2-STD-AUDI-A3
Product Code
QNAVI2-STD-MAIN-1302-001
SUNE TECHNOLOGY CO.,LTD
No.9,Lane 606,Anping Rd,Tainan City 70849,TAIWAN
TEL:[phone] FAX:[phone]
Http://www.sune-tech.com
Shop http://www.carnavi-tech.com
SKYPE:sune_tech or hsin_han99
CarNavi-Tech

Warning
Warning
Do not modify, dismantle or unintended
operation this system outside Qnavi After Sales.
Damage occured by unintended operation
may cause Qnavi After Sales service void.
•During installation ignition key should be
taken off and after all installation finish
connect power cable with interface for
the last step.
•Power cable should be separated when
connecting interface
•Should be no any electronic devices or
magnetic pole around installation place.
•All steps of installation should be done by
well-trained specialist.
•Dismantling without manufacturer’s
permission can not be guaranteed, (No
permission to break attached label on
the board.)
•Kindly check all parts are in the box, when
receiving the product, if anything missing,
inform to the supplier or manufacturer.
•According to our sales policy, any
problems caused by user’s mistake,
careless can not be guaranteed.
Warning
CarNavi-Tech

1. General spec
2. Component
3. Set Factory Menu
4. Installation Diagram
5. Installation
5.1 Connecting CAN Wire
5.2 Connecting LVDS Cable
6. Quality Warranty
Table of Contents
CarNavi-Tech

1. General Spec
-1-
INDEX
CONTENTS
INDEX
CONTENTS
CPU
Telechips TCC8900
(ARM11), 600MHz
Main
Memory
ROM NAND Flash MLC
128MB, DDR2 256MB
OS
Windows CE 6.0
External
Memory
SDHC (~32GB)
Display
OEM LCD
USB
2.0 (support for
recognition of HOST,
CLIENT )
GPS
U-BLOX5, 50 channels,
NMEA 0183,
9600/1 (board rate/port)
SD Card
SD/SDHC (TOSHIBA SDHC
Class6)
Audio
MP3, WMA, MP2, OGG,
AAC, M4A, MA4, FLAC,
APE, 3GP, WAV, RA
Movie
AVI, WMV, MPEG, MP4,
RMVB, TS, M2TS, TP, MOV,
VOB, MKV, 3GP, 3GA, ASF,
DIVX, TRP, FLV, RM, DAT,
M4V, M2V, MPG
Power
AC power - DC10V ~
DC16V
Operation
Temperature
-20℃ ~ 70℃
Touch
Panel
Non glare panel
Speaker
1watts, 1 way stereo
External
AV IN
Available
External
AV OUT
Available
CarNavi-Tech

2. Component
-2-
POWER cable * 1ea
(HPOWER0024)
MODE switch cable* 1ea
(HARETC0001)
Connecting with Power cable
GPS * 1ea
(GPSANT0004)
USB cable * 1ea
(HARETC0027)
REAR CAMERA POWER cable * 1ea
(HARETC0002)
A/V (IN/OUT) cable * 1ea
(HAVCA0002)
Speaker * 1ea
(SPEAKE0001)
LVDS cable * 1EA
(HLVDSC0014)
SD/BT cable * 1ea
(HARETC0025)
IF BOARD * 1ea
SD Card/Bluetooth Interface* 1ea
(QCPASS0269)
LCD cable * 1ea
(HLCDCA0015)
CarNavi-Tech

3. Set Factory Menu
-3-
①
※Main Menu → Setup →Version, find FACTORY menu
①FACTORY : Upgrade program and change external
device settings
(Password : 4291) –Only for installer
CarNavi-Tech

3. Set Factory Menu
①UPGRADE : upgrade O/S, APP, BT, FW
②GEAR CHECK : Choose signal recognition method for
detect rear gear (CAN or Wire)
③REAR CAM : While using external rear camera “ON”.
While using OEM camera “OFF”
④SAFE MODE : Set watching video while driving
⑤DVD TYPE : set connected DVD on A/V
(connect IR-AV1 wire with DVD, DVD can be control through
touch screen)
⑥SAVE & EXIT
①
②
③
⑤
⑥
④
-4-
CarNavi-Tech

4. Installation Diagram
-5-
USB Cable
SD/BT Cable
Microphone
REAR CAM
POWER
cable
GPS
SPK
USB
SD Card
Speaker
AV1 AV2 AV3
REAR C
Audio L
Audio R
AV/OUT Video
REAR (12V OUT)
GND
Command
Monitor
Original LVDS Cable
Offered QNAVI LVDS Cable
Offered LVDS Cable
POWER cable
CAN-H
GND
ACC
CAN-L
IR-AV1
IR-AV2
AUX-ON
MODE : Toggle S/W
REAR
SAFE
B+
TRIP
(White)
CAN-H
CAN-L
CarNavi-Tech

①Here is the picture of command from the car
5. Installation
-6-
5.1 Connecting CAN Wires
①There are CAN Wire of the car.
Connect with offered CAN Wire(HIGH-White, LOW-Yellow)
CarNavi-Tech

5. Installation
-7-
5.2 Connecting LVDS Cable
Command
Monitor
Offered LVDS Cable
Offered I/F Board
Original LVDS Cable
Main Board
Offered QNAVI LVDS Cable
CarNavi-Tech

6. Quality Warranty
-8-
This product has been tested and have passed under our strict
quality control. If the failure occurred due to the carelessness of
workmanship within one year after the purchase, we are
responsible to repair free of charge.
Please bring this warranty to dealer whom you purchased this
product from at the repair time. Should this warranty not
presented, repair charged will be on customer. Please keep this
warranty card.
Warranty
Product
name
QNAVI2-STD-AUDI-A3
Warranty
period
1 year
Purchase
date
(yy/mm/dd)
Customer
Address
TEL
Name
Dealer
Address
Name
CarNavi-Tech