Sune Technology QHI-PCM5.0 User manual

Installation Manual
HDMI Interface for New PORSCHE
Interface model QHI-PCM5.0

Compatibility: Porsche PCM5.0 cars
Components: Interface Main*1
Interface Input / Output specification:
Input:HDMI* 1
Analog RGB* 1
A/V* 2
CVBS(Front Camera)*1
CVBS(Rear Camera)*1
Output:To LCD*1
Power Spec:
Input Power: 8VDC ~ 18VDC
Consumption: 5WATT
Switch input mode:
1. External video sources skip function: Able to control input videos on and off
via Dip switches
2. Able to switch videos via the remote and button switch
3. Able to detect the rear view camera by CAN
2
1. High-resolution display through HDMI input
2. Control EXT devices(DVD/DTV) via Multi Media Touch GUI
3. Adjustable screen position of external device
4. Improved Screen Display(user-oriented interface)
5. Mode switching with OEM button
6. Power output for rear camera drive
7. Dynamic PAS(parking assistance system)

3
MAIN BOARD
AV CABLE
HAVCAB0056
MULTI CABLE
HARETC0240
REMOTE CONTROL
REMOTE0001
RGB CABLE
HRGBCA0013
BUTTON CABLE
HARETC0001
IR CABLE
HIRCAB0002
LCD CABLE
HLCDCA0017
POWER CABLE
HPOWER0213
CAN J BY J
HARETC0288

PIN FUNCTION Dip S/W SELECT
1 RGB OFF : RGB MODE
ON : RGB MODE SKIP
2 HDMI OFF : HDMI MODE
ON : HDMI MODE SKIP
3 AV1 OFF : AV1 MODE
ON : AV1 MODE SKIP
4 AV2 OFF : AV2 MODE
ON : AV2 MODE SKIP
5 FCAM OFF: External FCAM
ON: OEM FCAM
6 CAR MODEL No Use
7 REAR CAMERA OFF : OEM REAR CAMERA
ON : EXT REAR CAMERA
8 N/C
※ON : DOWN / OFF : UP
※Please make sure to disconnect the power cable of the interface and reconnect
the power cable again to apply the dip switch setting whenever changing DIP switch.
Key FUNCTION
POWER & PIP N/C
MENU Activating OSD menu
OK Making a selection, changing image display
▲Moving upward
▼Moving downward
◀
Moving leftward
(If you press this button 2 seconds long, you can
access the factory mode)
▶
Moving rightward
(If you press this button 2 seconds long, you can
reset all the data about user environment) 4

PAS TYPE: Select parking line type.
•NOT USED: Do not use parking line
•PAS ON: Use Flexible Parking Lines
•PAS OFF: Use fixed parking line
PAS SETUP: You can move the position of parking line.
REAR TYPE : Choose rear camera recognition.
•CAN : By connecting to “CAN” cable of the car gear, changing to rear camera
mode when shifting into reverse. (Connect “CAN” cable of the power cable to the
“CAN” cable of the car gear)
•LAMP : By connecting to the rear lamp of the car, switch to rear camera mode
when shifting into rear. (Connect “Rear-C” cable of the power cable to the rear
lamp of the car)
SAFE ENABLE : If it is enable, HDMI, RGB, and A/V mode doesn’t show up while
driving. (Default : OFF)
Change the settings of the rear camera.
Adjust the screen position of the current mode.
H-POSITION: Move the screen left and right.
V-POSITION: Move the screen up and down.
IMAGE
PARK
UTIL1
UTIL2
INFO
H-POSITION
V-POSITION
Menu of FACTORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UTIL1
UTIL2
INFO
PAS TYPE
PAS SETUP
REAR TYPE
SAFE ENABLE
Menu of FACTORY
MENU to Return SEL to Select/Save
5

UTIL1 Setting
NAVI MODEL: RGB navigation setting
(Default, Q-roi RGB, WP9230,
HDMI(WVGA))
AVOUT SELECT: Select audio channel
transmitted through AUX
(HDMI, AV)
FCAM TIME: Set up the time for Showing
FCAM
FACTORY RESET: Factory mode reset
Other options setting
TOUCHREMOTE: Control the DVD and DTV by
TOUCH with provided GUI
I-DRV CONTROL: YES / NO
HANDLE KEY:
IMAGE
PARK
UTIL1
UTIL2
INFO
NAVI MODEL
AVOUT SELECT
FCAM TIME
FACTORY RESET
Menu of FACTORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UTIL1
UTIL2
INFO
TOUCH REMOTE
TOUCH CONTROL
HANDLE KEY
Menu of FACTORY
MENU to Return SEL to Select/Save
6
System version information.
IMAGE
PARK
UTIL1
UTIL2
INFO
SYSTEM VERSION
(MAIN -180719)
(MCU : P1.8.08.16
Menu of FACTORY
MENU to Return SEL to Select/Save

7
RGB NAVIGATION
※Please
disconnect OEM
connector in red
circle on OEM
bunch of
Connector and
please connect
supplied CAN
cable.
OEM Cable
R
C
A
M
S
A
F
E
R
E
A
R
V
1
I
R
V
2
I
R
R
E
M
O
T
E
T
O
G
G
L
E
12
V
S
E
L
F
C
A
M
12
V
MULTI CABLE
A
U
D
I
O
(R)
O
U
T
A
U
D
I
O
(L)
O
U
T
F
C
A
M
A
U
D
I
O
(R)
IN
1
A
U
D
I
O
(L)
IN
1
R
C
A
M
V
I
D
E
O
IN
1
V
I
D
E
O
O
U
T
1
V
I
D
E
O
O
U
T
2
A
U
D
I
O
(R)
IN
2
A
U
D
I
O
(L)
IN
2
V
I
D
E
O
IN
2
A/V CABLE
QDIS
supplied LCD
Cable
OEM LCD
Cable
OEM Monitor

8
Connect IR-NAVI cable (from Interface RGB cable) with TOUCH-RX cable (from
UART-TOUCH of QROI2-RGB MULTI CABLE) as above.

9
※Please press HOME button long for mode switch.
※ Press back button on steering wheel for
mode change.
(To use this function, please set up HANDEL KEY
‘Enable’ on UTIL2 of Factory setting )

10
※Please press APPS button long for mode switch.
※For OEM button use on Macan, the FW version should be 190422 and
afterward. (And Car model should be selected to Macan on Factory setting)

11
Q. I cannot change mode
A. Check connection of Ground cable and IR Cable. Check LED lamp is on, if not
check connection of POWER cable.
Q. All I got on the screen is black.
A. Check second LED lamp of the interface is on, if not, check A/V sources
connected are working well. (Second lamp indicates AV sources connected works
well) Check interface connection has been done well.
Q. Displayed image color is not proper (too dark or unsuitable color)
A. Press ▶button on the remote control for 2 seconds and check how it goes, if it
does not work, inform to manufacturer.
Q. I cannot watch the rear camera on the screen
A. Set the DIP switch #7 as state “ON”.
Q. Set mode not appear
A. Check DIP Switch.
Q. OEM image is not displayed.
A. Check interface’s LCD In/Out cable connection. If the status keeps on, inform to
manufacturer.
Q. Screen only displays white color.
A. Check LCD out cable is connected well, if this status keeps, inform to
manufacturer.
Q. If no image is shown on screen after connecting CAN wire with Park gear.
A. Go on the “FACTORY MODE”, check “UTIL-Rear Select”. If “LAMP”, change the
setting as “CAN” with the remote control. (※when connecting Rear-C wire of LAMP
power cable to Backup lights, Setting should be like this / CAN : if controlling rear
camera with CAN wire)

12
Copyright ⓒ2019 by SUNE TECHNOLOGY
SUNE TECHNOLOGY CO.,LTD
No.9,Lane 606,Anping Rd,Tainan City 70849,TAIWAN TEL:[phone] FAX:
[phone]
Http://www.sune-tech.com
Shop http://www.carnavi-tech.com
SKYPE:sune_tech or hsin_han99