Sunjoy 110108001-G User manual

1/ 7
Thank you for your purchase! We are pleased that you have chosen Sunjoy for your outdoor furniture
purchase.
Our clear, easy to follow, step by step instructions will guide you through the project from start to finish.
Assembly Instructions
Item#:110108001-G
Vendor code:D-AW001-G

2/ 7
Safety information
•Keep all children and pets away from assembly area. Children and pets should be supervised when they are
in the area of the production construction.
•This package contains small items and plastic bags that should be kept away from children.
•Keep assembly area at least 6 ft. from any obstruction such as a fence, garage, house, overhanging branches,
laundry line or electrical wires.
•Proper placement of your product is essential. Do not place the product underneath electrical lines.
•Keep fingers away from places where they can be pinched or trapped.
•Some parts may contain sharp edges, wear protective gloves if necessary during assembly.
•When assembling and using this product, basic safety precautions should always be followed to reduce the
risk of personal injury and damage to equipment. Please read all instructions before assembly and use.
•Check all screws for tightness before and during usage. Ensure that all connectors and poles are firmly and
fully secured into position. It is important to do so before use so as to avoid a possible collapse or damage to
the item, which could also result in injury.
• This product is intended for outdoor use only.
•Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightening.
•Warranty does not cover damage due to extreme weather conditions.
•Please check your state and local regulations prior to purchasing. Some jurisdictions may require permits for,
or otherwise regulate, installation and use.
Warning
•Keep all flame and heat sources away from this awning fabric. This fabric meets the flammability
requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The
application of any foreign substance to the awning fabric may render the flame-resistant properties ineffective.
Assembly Preparation
• Please read and understand this entire manual before attempting to assemble or install the product. Keep this
manual for future reference.
•Before beginning assembly of product, make sure all parts are present. Do not attempt to assemble the
product if any parts are missing.
•For technical assistance on assembly or replacement parts please call our customer service department at
1-866-578-6569 for help.
•This unit is heavy. Do not assemble this item alone. At least two or more people are recommended for safe
assembly.
•Tools required for assembly (NOT included): a screwdriver, a hammer, wrenches (M8, M10, M12) and two
ladders not lower than 2m (6.6ft).
Important
Please do not return this product to the store. For technical assistance or replacement parts, please call Sunjoy
Group at 1 [phone] between 8:00 AM EST and 8:00 PM PST. You may fax your replacement parts form
(which is included in the packaging) to 1 [phone] or email to [e-mail]

3/ 7
Description
Part#
Label.
Qty
Image
Awning
AW0001XXG01
A
1
Wall Bracket
AW0001XXG02
B
2
Crank Handle
AW0001XXG03
C
1
M8x55 Hex Bolt
BM08055E
AA
2
M8 Washer
VD08E
BB
2
M8 Hex Nut
LM08E
CC
2
M10x90 Anchor Bolt
PZM10090E
DD
4
M12x60 Hex Sharp
Bolt
BAM12060E
EE
4
Parts List

4/ 7
Step 1: Installation of Wall Bracket
Notice: Please call a professional for assistance on installation for walls other than wood or
concrete.
Open packaging, remove Wall bracket (B), and Anchor bolt (DD), to install on wall or ceiling. Place
Anchors bolt (DD) or Hex Sharp bolt (EE) into the holes, install the wall bracket and keep all brackets
level, and tightly fasten screws.
Square bar screw
DD
Concrete
Wall
B
Square bar screw
EE
Wooden
Wall
B
Level
Installation of equal wall
2380mm

5/ 7
Step 2: Installation of awning
Step 3: Awning Operation
Fig.1: Fabric Cover
Correct way Wrong way
Cover
Cover
Remove awning, including all hardware from box, we suggest two people lift the Awning (A) to the height
of wall bracket, and slide the Awning (A) into Wall bracket (B), fasten with Bolt (AA), washer (BB) and Nut
(CC). When installing Wall bracket (B), the distance (L) between the wall bracket and shoulder bracket
should not be larger than 50mm (2 inches).
Do not fix the screw too tight, in case of the accident!
BB
CC
AA
B

6/ 7
Fig.2: Open and close manual-operated awning
Put the crank handle into gear box loop, Place hands on plastic handle and turn handle clockwise to open awning.
Fig.3: Adjust angle of Awning
Plastic Handle
Notice:
1. The cover need to remain tight when the awning is fully open
2. When turning the crank handle, make sure it keeps in the same straight line with loop
Correct way
Wrong way
Notice: Do not turn Bolt (BB) until to unscrewing Bolt (AA). When adjusting angle, please support the
awning arm by hand.
Bolt AA
Bolt BB

7/ 7
Care & Maintenance
•Before using, clean the product completely with a soft, dry towel. When not in use, wipe free of any dirt or loose
objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
•Do not use strong detergent or abrasive cleaners.
•Do not machine wash.
•Bolts can loosen over time. Be sure to check bolts occasionally, tightening as needed.
•Our iron/steel components for garden accessories and patio items are coated with rust inhibiting paint that
protects it from rusting. However, due to the nature of iron, surface oxidation (rusting) will occur once these
protective coatings are scratched. This is a natural process and is not a defect! To minimize this condition, we
recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching
or damage occur, we recommend immediate touch-up with rust inhibiting paint. Surface rust can also be easily
removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure
is taken to prevent this, the oxidation may start dripping on to deck or patio and cause damaging stains, which may
be difficult to remove. This can be prevented if measure is taken to keep the product from oxidizing.
Limited Warranty
•This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship
of your item provided the item is maintained with care and used only for personal, residential purposes.
•The item is warranted to be free from defects in material or workmanship for a period of 6 months. If any defect
is found, please call our customer service department at 1-866-578-6569 for help. The manufacturer will not
cover transportation or delivery costs, or compensate the individual or any outside party for assembling or
disassembling the product. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Exclusions
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered.
Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser
and is non-transferable. Any replacement of warranted items will be in the original style and color, or a similar
style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or
limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you
specific rights, and you may also have other rights, which vary from state to state.
Made in China
2017-04