Sunjoy L-BC153PST-S User manual

WARNING:
·Keep all children and pets away from assembly area. Children and pets should be supervised when they
are in the area of the Cooler construction.
·Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging
branches, laundry line or electrical wires.
·Some parts may contain sharp edges. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and damage to the product. Please read all
instructions before assembly and use.
·Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
·For outdoor use only.
Assembly Instruction
SKU#550005522
60 QT Black & Silver Cooler
Model#L-BC153PST-S

Part list
No.
Description
Qty
Image
A Knob 2
B Lid 1
C Bottle opener 1
D
Handle (Pre-assembled
to Body)
1
E Body 1
F Cap catcher 1
G Leg 4
H Caster with brake
(Pre-assembled to leg) 2
I Caster
(Pre-assembled to leg) 2
J Drain plug
(Pre-assembled to Body) 1
K M6×13 Bolt 14
L M4×30 Bolt
(Pre-attached)
2
M “L” Wrench 1

Step 1：Step 2：
Step 3：Step 4：
Put all parts on a clean and level surface before
assembling. Put body (E) upside down. Connect leg
(G) and body (E) by 3pcs M6×13 bolts (K). Fully
tighten by M (“L” Wrench).
Attach cap catcher (F) to body (E).
Connect bottle opener (C) and body (E) by
2pcs M6×13 bolt (K).Fully tighten by wrench
(M)
Remove the pre-assembled knob (A) at the
back of lid (B). Then attach knob (A) to lid (B) by
M4×30 bolt (L).