Sunjoy A601002201 User manual

1/ 4
Country of Origin: China Production Number: XXXXXXXXXX
ASSEMBLY INSTRUCTION
80QT WOOD GRAIN COOLER
Item No.: A601002201
USE AND CARE GUIDE
Carefully read all instructions and caution warnings before beginning
assembly. Save this Use and Care Guide for future reference.

2/ 4
Country of Origin: China Production Number: XXXXXXXXXX
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact
customer service for replacement parts.
Part Part Number Description QTY
A P005100236 Handle(pre-assembled on B) 2
B P003100081 Lid(pre-assembled on C) 1
C P003200011 Basin 1
D P005100237 Drain Plug(pre-assembled on C ) 1
E P007100007 Bottle Opener 1
F P007200010 Bucket 1
G1 P005400390 Leg1 2
G2 P005400391 Leg2 2
H P002300067 Baseboard 1
I P003300047 Caster 2
J P003300048 Caster with brake 2
Part Part Number Description QTY Image
AA H100010092 Bolt(pre-assembled on B) M4*25mm
2
BB H010110056 Bolt(pre-assembled on C) M6*12mm
2
CC H010060019 Bolt M6*12 mm
12
DD H050080001 Washer M6 mm
12
EE H090030002 Wrench M6 mm
1
FF H090010020 Wrench 17mm
1
Warning！
•When they are in the area of the Cooler construction
•Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging
branches, laundry line or electrical wires.
•Some parts may contain sharp edges. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and damage to the product. Please read
all instructions before assembly and use.
•Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them
secure!
Im
p
ortant Safet
y
Instructions
Parts List
Hardware Pack
USE AND CARE GUIDE
Carefully read all instructions and caution warnings before
beginning assembly. Save this Use and Care Guide for future
reference.
USE AND CARE GUIDE
Carefully read all instructions and caution warnings before
beginning assembly. Save this Use and Care Guide for future
reference.
USE AND CARE GUIDE
Carefully read all instructions and caution warnings before
beginning assembly. Save this Use and Care Guide for future
reference.

3/ 4
Country of Origin: China Production Number: XXXXXXXXXX
2：Insert the Casters (I & J) to the support legs (G1&G2)
by wrench (FF).
1：Connect the Baseboard (H) with the legs (G1&G2)
using Bolts (CC) and Washers (DD). Do not completely
tighten the bolts.
3：Attach the assembled legs (G1&G2) and the Basin
(C) using Bolts (CC) and Washers (DD). Fully tighten all
the bolts.
4：Remove the Handle (A) and Bolt (AA) from the lid (B) as Fig4.1
Attach the Handles (A) to the Lid (B) using Bolt (AA) as Fig4.2.
Assembly Step

4/ 4
Country of Origin: China Production Number: XXXXXXXXXX
•Our iron components for garden accessories and furniture are finished using a powder coating process that
protects it from rusting. However, due to the nature of iron, surface oxidation (rusting) will occur if these
protective coatings are scratched. This is a natural process and is not a defect. To minimize this condition, use
care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage
occur, immediately touch-up with rust inhibiting paint, which is readily available at a local hardware store.
Surface rust can also be easily removed with a very light application of cooking oil. If rusting occurs and if no
measure is taken to inhibit this, the rust may start dripping onto a deck or patio and cause damaging stains that
may be difficult to remove. This can be prevented if measures are taken to keep the product from rusting.
•To prolong the life of your cooler, it is recommended that you drain out all liquid and thoroughly dry your cooler
after every use. Not complying with this care requirement can cause premature rusting and water deposits
(metal interior) or molds and mildew (for plastic interior).
•Before using, clean the cooler with a soft dry towel.
•Drain the water in the cooler and dry the cooler with a soft towel.
•We recommend the use of furniture covers (not included) to protect your cooler while not in use.
5：Remove the Bolts (BB) from the Basin (C) as Fig5.1 Attach the Bottle Opener(E to the basin (C) using Bolts (BB). Insert the
Bucket (F) into the clips located on the basin (C).
CARE AND MAINTENANCE
WARRANTY
Assembly Step
VALID ONLY WITH ORIGINAL PURCHASE RECEIPT
WARRANTY: Co-op offers to the original purchaser a one-year limited warranty on this item, in the event of any
manufacturing defect in material and workmanship during normal residential use within one years from the date
of purchase.
WARRANTY COVERAGE: Co-op will replace, at no charge, excluding labour, any set of this item that is proven to
be defective under normal use. Any equivalent replacement will be issued to the original owner provided the
defective unit was used and cleaned as recommended and not damaged because of abuse, misuse or negligence.
Chips, scratches and stains are not deemed to be manufacturing defects. Please refer to the care and cleaning
instructions to maintain your item in its original appearance.
This warranty gives you specific legal rights, and you may also have other rights that may vary from province to
province.
The terms of this warranty are subject to change without notice.