Sunjoy A101012202 User manual

Country of Origin: China Production Number: xxxxxxxxxx
WE HAVE YOU IN MIND, LET US SERVE YOU!
Questions?
Issues?
CONTACT US
24 hours / 7 days a week
www.sunjoyonline.com
1-(866)-578-6569
[email protected]
ITEM NO.：A101012202

2/ 22
Country of Origin: China
1. More than two people are required for this assembly.
2. Some parts may contain sharp edges. Wear protective
gloves.
3. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of
personal injury and damage to equipment. Please read all
instructions before assembly and usage.
WARNING: While this gazebo is manufactured to
withstand winds through only the supplied ground stakes, in
areas subject to frequent severe weather, securing the
gazebo to a deck, concrete patio or footings should be
considered.
Snow must be cleared off regularly during snowy days.
Remove the snow at the top when it is thicker than 4 inches.
In order to avoid damage, use a plastic snow rake to remove
excessive snow and ice buildup from roof and keep away
from falling debris.
CAUTION: Do not climb on top of the gazebo. Falling off
the gazebo can result in serious injury, possibly even death.
6 MONTHS WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the
item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material
or workmanship for a period of 1 years.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling or disassembling
the product.
Safety Information
WARNING: Keep all flame and heat sources away from
this gazebo fabric. This Gazebo is made with fabric that
meets CPAI-84 specifications for flame resistance. It is not
fire proof. The fabric will burn if left in continuous contact
with any flame source. The application of any foreign
substance to the gazebo fabric may render the
flame-resistant properties ineffective.
NOTICE: For outdoor use only.
Warranty
DANGER: This unit is heavy! Do not assemble this
item alone.

3/ 22
Country of Origin: China
Pre-Assembly
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC
DD
Part Part Number Description Quantity
A
AP005100262 M6
X
20 Screw 24
BB H070010019 ￠6 X 200 Stake 8
CC R079990135 Plastic Ring 52
DD P005100263 M5 X 15 Screw 16
ADDITIONAL HARDWARE
Part Part Number Description Quantity
A
AP005100262 M6
X
20 Screw 2
CC R079990135 Plastic Ring 1
DD P005100263 M5
X
15 Screw 1

4/ 22
Pre-Assembly (continued)
PACKAGE CONTENTS
A1
A2
B1
B2
B3
C2
F1
G
K
M
L
J
C3
C4
C1
E2
F2
D1
H
I
D2
D3
E1
N
Country of Origin: China

5/ 22
Pre-Assembly (continued)
Part Part Number Description Quantity
A1 P000200461 Post 1 4
A2 P000200460 Post 2 4
B1 P006300077 Cross panel 8
B2 P000400897 Long cross beam 2
B3 P000400898 Short cross beam 2
C1 P005700661 Long mosquito netting bar 1 4
C2 P005700662 Long mosquito netting bar 2 4
C3 P005700663 Short mosquito netting bar 1 4
C4 P005700664 Short mosquito netting bar 2 4
D1 P000601344 Upper oblique tube 4
D2 P000601345 Middle oblique tube 4
D3 P000601343 Bottom oblique tube 4
E1 P000601346 Upper long middle tube 2
E2 P000601347 Bottom long middle tube 2
F1 P000601348 Upper short middle tube 2
F2 P000601349 Bottom short middle tube 2
G P000501178 Big roof connector 1
H P000501177 Small roof connector 1
I P000601350 Small roof oblique tube 4
J P005600300 Top Decoration 1
K P005800001 Hook 1
L P001100555 Small Canopy 1
M P001100556 Big Canopy 1
N P001200216 Mosquito Netting 1
Country of Origin: China

6/ 22
Assembly
1Assembling the Cross Panels
Connect 2 sets of Cross Panels (B1) with the long cross beams (B2) using screws (DD).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
B1 B2
DD
B1
Country of Origin: China

7/ 22
Assembly
2Assembling the Cross Panels
Connect another 2 sets of Cross Panels (B1) with the short cross beam (B3) using screws (DD).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
B1 B3
DD
B1
Country of Origin: China

8/ 22
Assembly
3Assembling Mosquito Netting Bars
Connect the Long mosquito netting bar 1 (C1) with Long mosquito netting bar 2 (C2). Connect the Short mosquito netting bar 1 (C3) with
Short mosquito netting bar 2 (C4) .
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
C1 C2
C3 C4
Country of Origin: China

9/ 22
Assembly
4Attaching the Mosquito Netting Bars
Attach the assembled Long Mosquito Bars (C1&C2) to the Cross Beam (B1) using bolts (AA). Attach the Short Mosquito Bar (C3&C4) in the
same way .
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
C1
C3
C2 B2
B1
B1
AA
B3
C4
B1
B1
B2
C2
in
Country of Origin: China

10 / 22
Assembly
5Assemble the Post 1 and Post 2
Screw the Post 2 (A2) on Post 1 (A1).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
A
1
A
2
A
2
A
1
A
2
A
1
Country of Origin: China

11 / 22
Assembly
6Attaching the Crossbeams
Attach the Post 1 (A1) to the assembled Cross Beams (B1&B1) using bolts (AA).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
B1
A
A
A
1
A
1
B1 B2
B2
Country of Origin: China

12 / 22
Assembly
7Attaching the Crossbeams
Attach the Post 1 (A1) to the assembled Cross Beams (B1&B1) using bolts (AA).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
AA
A1
B2
B1
B3
B3
A1
Country of Origin: China

13 / 22
Assembly
8Assembling the Oblique Tubes
Connect the Upper oblique tube (D1), Middle oblique tube (D2) and Bottom oblique tube (D3) using the spring button on the parts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
D3
D2
D1
D1 D2 D2 D3
Country of Origin: China

14/ 22
Assembly
9Assembling the Middle Tubes
Connect the Bottom long middle tube (E2) and Upper long middle tube (E1) using the spring button on the parts. Connect the Bottom short
middle tube (F2) and Upper short middle tube (F1) using the spring button on the parts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
F1
F2
E2 E1
Country of Origin: China

15/ 22
Assembly
10 Attaching the Oblique Tube and Hook
Inset the Upper oblique tubes (D1) to the Big roof connector (G), then Screw the Hook (K) to the Big roof connector (G). Insert the Bottom
oblique tube (D3) to the Post 1 (A1).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
G
D1 KD3
A1
Country of Origin: China
Country of Origin: China
Country of Origin: China
Country of Origin: China

16/ 22
Assembly
11 Attaching the Middle Tubes
Insert the assembled Long middle tube (E1) to the Big roof connector (G), insert the Bottom long middle tube (E2) to the Short cross beam
(B3).
Insert the assembled Short middle tube (F1) to the Big roof connector (G), insert the Bottom short middle tube (F2) to the Long cross beam
(B2).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
G
F1
E1
F2
B2
F2 F1 E1
E2
B2
B3
Country of Origin: China

17/ 22
Assembly
12 Assembling the Small Roof
Deeply inert the Small roof oblique tube (I) to the Small roof connector (H) to the end (Fig.1), put the small canopy on the small roof and align
the corners (Fig.2). Screw the Top decoration (J) on the roof (Fig.3)，pull the Small roof oblique tube (I) back to fit the holl.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
H
I
Fig:3
Fig:2
Fig:4
J
L
H
I
Fig:1
Country of Origin: China

18/ 22
Assembly
13 Attaching the Small Roof
Put the big canopy (M) on the assembled big roof (D1), connect the assembled small roof (I) with the big roof (D1) using the spring button on
the parts before spread the big canopy (M).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
I
D1
M
M
Country of Origin: China

19 / 22
Assembly
14 Spreading the Big Canopy
Spread the Big canopy (M), and first aligning the 4 corners to the Oblique Tubes (D3). Then aligning the big canopy to the middle tube
(E1&E2).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
D3
M
M
E2
Country of Origin: China

20/ 22
Assembly
15 Attaching the Curtain and Netting
Hang the Mosquito Netting (N) on the Mosquito Netting Bar (C1, C2, C3, C4) using Plastic Ring (CC).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
N
N
Country of Origin: China
CC