Sunjoy A104000100 User manual

1
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-578-6569 anytime 24 hours / 7 days a week, or email to
[email protected] or visit www.sunjoyonline.com.
ATTACH YOUR RECEIPT HERE
ITEM # 0757134 / 38115272
MODEL # A104000100
Hardtop Grill Gazebo
Français p. 16

2
PACKAGE CONTENTS
A1
C
E
B
J
I1
Q2
H2
I2
R1
Q1
F1
F2
F3 G
H1 H3
I3

L
N
PO
3
PACKAGE CONTENTS
PART
A1
B
C
Q1
Q2
E
2
4
2
2
1
2
2
Roof Vent
Base
Base cover
Truss Beam (1)
Truss Beam (2)
Top Connecting Pole
Connecting Board 1
DESCRIPTION
F1
4
Connecting Board 2
F2
PART DESCRIPTION
2
Roof Cladding – short panel(2)
F3
Roof Cladding – short panel(3) 2I3
J
R1
1Trim Cap
Post（1）2
Tile (Pre-assembled)
M2
R2
L
Post（2）
M1
2
2
14
4
Counter
Skew Support Piece
QUANTITY QUANTITY
G
H1
H2
H3
I1
I2
2
2
2
2
Top Hook
Roof Cladding – long panel (1)
Roof Cladding – long panel (2)
Roof Cladding – long panel (3)
Roof Cladding – short panel(1)
2
8
Presser 2 (Pre-assembled)
M4
Screen 2
N
P
O
4
Led light
Cover Supporting Board 6
Connecting Board 3 4Presser 1 (Pre-assembled) M3 24
R2
M3
M4
M2
M1

4
HARDWARE CONTENTS
AA BB
M6 x 20 Bolt
QTY: 84 + 5 Spare
M6 Flat Washer
QTY: 134 + 7 Spare
M6 x 15 Bolt
QTY: 48 + 3 Spare
M6 x 40 Bolt
QTY: 2 + 1 Spare
M6 Spring Washer
QTY: 20 + 1 Spare
M6 Wrench
QTY: 2
Ø8 x 180 Stake
QTY: 8
CC EE
FF II Z
M4 x 10 Screw
QTY: 32 + 2 Spare
JJ

WARNING
•This product is intended for outdoor use only and should be placed on
flat, horizontal ground.
• Ensure enough clearance around the product.
•Before assembling the product, find level ground no less than
6 ft. away from any structures or obstructions, such as fences,
garages, houses, overhanging branches, laundry lines, or electrical wires.
•The gazebo must be anchored with stakes onto the ground for added safety.
• It cannot be permanently attached to a concrete floor or platform.
•Do not assemble the gazebo on sandy, muddy or loose soil, as
stakes do not have enough anchorage in these types of soil.
•This product is for outdoor use only! Do not climb on top of the gazebo!
Do not use the unit during an electrical storm!
CAUTIONS
•Any assembly or maintenance of the product must be carried out by adults
only.
•Arrange 6 or more manpower when assembling or moving the product.
•Some parts may contain sharp edges. Wear protective gloves if necessary.
•Check all nuts and bolts periodically for tightness. When required, tighten
them again.
• Do not hang any weights on the roof frame.
•Always keep children under close supervision when they are using
or are around this product. Never leave children unattended.
Hook maximum weight: 26 lbs
PREPARATION
PREPARATION
•Hook maximum weight: 26 lbs
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list. If any
part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 90 minutes
Tools Required For Assenboly: Wrench (included) and Phillips
Screwdriver ( not included ).
5

6
ASSEMBLY INSTRUCTIONS
1. Attach truss beam(Q1)(Q2) to top roof vent
(A1), assemble them with Connecting
Board 1 (F1) by using bolt (AA) and flat
washer (BB).
1
A1
BB AA
F1
Q1 Q2
Hardware Used
M6 Flat Washer
BB x 12
M6 x 20 Bolt
AA x 12
2. Attach top hook (G) to Top Connecting
Pole (E). 2
E
G
A1
A1

7
ASSEMBLY INSTRUCTIONS
3. Attach Top Connecting Pole (E) to top
roof vent (A1) by using bolt (AA) and flat
washer (BB)
3
x 4
M6 Flat Washer
Hardware Used
BB
M6 x 20 Bolt
AA x 4
4. Attach Connecting Board 3 (F3) to top
roof vent (A1) by using bolt (AA) and flat
washer (BB)
4
5. Attach Truss Beam (Q1)(Q2) to
Connecting Board 3 (F3) by using bolt
(AA) and flat washer (BB)
5
AA
BB
F1
E
A1
AA
BB
F3
Q2
A1
x 8
M6 Flat Washer
Hardware Used
BB
M6 x 20 Bolt
AA x 8
Q2
BB AA
F3
x 8
M6 Flat Washer
Hardware Used
BB
M6 x 20 Bolt
AA x 8
Q1

8
ASSEMBLY INSTRUCTIONS
6. Attach Connecting Board 2 (F2) to Truss
Beam (Q1)(Q2) by using bolt (AA) and
flat washer (BB) 12-1
6 6 6
7. Attach Roof cladding – long panels (H1)
(H2)(H3) to Cover Supporting Board (O)
by using bolt (CC) and flat asher (BB). 12-1
6 6 7
Q2
Q1 BB AA
F2
x 8
M6 Flat Washer
Hardware Used
BB
M6 x 20 Bolt
AA x 8
x 24
M6 Flat Washer
Hardware Used
BB
M6 x 15 Bolt
CC x 24
CC
BB
O
H1
H2 H3
Step 2
O

9
ASSEMBLY INSTRUCTIONS
8. Attach the Roof cladding – short panels
(I1)(I2)(I3) to Cover Supporting Board (P)
by using bolt (CC) and flat asher (BB).
9. Attach trim cap (J) to Top Connecting Pole
by using bolts (EE) and flat washer (BB). 6 6 9
x 16
M6 Flat Washer
Hardware Used
BB
M6 x 15 Bolt
CC x 16
EE
BB
J
x 2
M6 Flat Washer
Hardware Used
BB
M6 x 40 Bolt
EE x 2
Step 3
8
BB
CC I1
I2 I3
CC
BB

10
ASSEMBLY INSTRUCTIONS
10. Insert Base cover (C) into Pole (R1)(R2),
attach Base (B) and Pole (R1)( R2) by
using bolt (CC) and flat washer (BB). 12-1
6 610
11. ALift the assembled big top and attach
the Posts (R1 & R2) to the Truss Beam
(1) (Q1) and Truss Beam (2) (Q2),
secure with bolt (AA), flat washer (BB)
and spring washer (FF).
6 6 11
x 8
M6 Flat Washer
Hardware Used
BB
M6 x 15 Bolt
CC x 8
M6 Flat Washer
BB x 12
M6 x 20 Bolt
AA x 12
M6 Spring Washer
FF x 12
12. Attach Screen (N) to Pole (R1)(R2) by
using bolt (AA), flat washer (BB),
Spring washer(FF).
6 6
Hardware Used
M6 Flat Washer
BB x 8
M6 x 20 Bolt
AA x 8
M6 Spring Washer
FF x 8
R1
R2
C
CC
BB
B
Q1 Q2
BB FF
AA
R1
R2
BB FF AA
R1
R2
N
12
Hardware Used

11
ASSEMBLY INSTRUCTIONS
13. Attach Skew support piece (L) onto Pole
(R1)(R2) and Truss Beam (Q1)(Q2) by
using bolts (AA) and flat washer (BB).
12-1
6 613
Preassemble Step: Insert the Tile (M2) into
the pane of the counter (M1). Fasten the tile
by using Presser1 (M3), Presser2 (M4) and
screw (JJ).
Hardware Used
Hardware Used
M4 x 10 Screw
JJ x 32
14. Attach Countertop (M1) onto Pole
(R1)(R2) by using bolt (AA) and flat
washer (BB).
6 6
Hardware Used
14
x 16
M6 Flat Washer
BB
M6 x 20 Bolt
AA x 16
x 8
M6 Flat Washer
BB
M6 x 20 Bolt
AA x 8
Q1
Q2
R1
R2
BB
AA
L
JJ
M4
M1
R1
R2
BB AA
M1
M2
M3

ASSEMBLY INSTRUCTIONS
12
15. Lift up Base cover (C), use Stake (II) to
fasten the gazebo on the ground. Put
down Base cover (C) and now your
gazebo is ready for use.
12-1
6 615
Hardware Used
￠8 x 180 stake
II x 8
16-1. Take off the back cover of LED light
(P), and match 3 pieces AAA batteries
into sockets. Attach back cover toLED
light (P). Note: Batteries are not included.
12-1
6 616-1
II II
C
P
P
F1
16-2
16-2. Hang the assembled LED light (P)
into holes of Connecting Board 1 (F1)

13
CARE & MAINTENANCE
SIX-MONTH LIMITED WARRANTY
To extend the life of grill gazebo, do not use when there are high
winds. Disassemble and pack away when the gazebo will not be
used for an extended period.Ensure that the metal parts are all dry
before packing away.
This limited warranty is extended to the original purchaser and applies to defects
in material and workmanship of your item provided the item is maintained with
care and used only for personal, residential purposes. The manufacturer
warrants this item to be free from defects in material and workmanship for a
period of 6 MONTHS. If any defect is found, please call our customer service
department at 1-866-578-6569 for help. The manufacturer will not cover
transportation or delivery costs or compensate the individual or any outside party
for assembling or disassembling the product. This warranty gives you certain
rights, and you may have other rights that vary from state to state.

For replacement parts, call our customer service department at 1-866-578-6569
anytime 24 hours / 7 days a week.
REPLACEMENT PARTS LIST
14

Printed in China
Production Number：2021200003
REPLACEMENT PARTS LIST
15
P000400713
JJ
Z
II
AA
CC
EE
FF
BB
AA BB CC EE
FF II Z
JJ
PART
A1
B
C
Q1
Q2
E
Roof Vent
Base
Base cover
Truss Beam (1)
Truss Beam (2)
Top Connecting Pole
Connecting Board 1
DESCRIPTION
F1
P000100207
Connecting Board 2
F2
PART DESCRIPTION
Tile (Pre-assembled)M2
R2
L
Post（2）
M1 Counter
Skew Support Piece
NUMBER NUMBER
G
H1
H2
H3
I1
Top Hook
Roof Cladding – long panel (1)
Roof Cladding – long panel (2)
Roof Cladding – long panel (3)
Roof Cladding – short panel(1)
Presser 2 (Pre-assembled)
M4
Screen
N
P
O
Led light
Cover Supporting BoardConnecting Board 3
Presser 1 (Pre-assembled)
M3
Roof Cladding – short panel(2)
Roof Cladding – short panel(3)
I3
J
R1
Trim Cap
Post（1）
I2
F3
P000200341
P005000288
P002200138
P002200139
P000400716
P002100220
P002100221
P006000008
P002200137
M6 x 20 Bolt
H010020012
M6 Flat Washer
H050030001
M6 x 15 Bolt
H010020011
H010020022
M6 x 40 Bolt
M6 Spring Washer
H050020017
Ø8 x 180 Stake
H070010003
M4 x 10 Screw
H030040030
CM6 Wrench
H090010017
P006100132
P000601071
P000400714
P000400712
P000400715
P000601072
P000601070
P005800001
P000700464
P000700465
P000700466
P000700468
P000800192
P000200340
P000700467
P000700469
For replacement parts, call our customer service department at 1-866-578-6569
anytime 24 hours / 7 days a week.

16
JOIGNEZ VOTRE REÇU ICI
Numéro de série Date d’achat
Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au
détaillant, communiquez avec notre service à la clientèle au 1-866-578-6569 à n’importe
quelle heure, ou envoyez un email à [email protected] ou visiter le
www.sunjoyonline.com.
GAZEBO GRILL Á TOIT SOLIDE
ARTICLE # 0757134 / 38115272
MODÈLE # A104000100

17
CONTENU DE L’EMBALLAGE
A1
C
E
B
J
I1
Q2
H2
I2
R1
Q1
F1
F2
F3 G
H1 H3
I3

L
N
PO
18
CONTENIDO DEL PAQUETE
PIÈCE
A1
B
C
Q1
Q2
E
2
4
2
2
1
2
2
Base
Couvert de Base
Poutre Inclinée (1)
Poutre Inclinée (2)
Poutre de Connexion du Toit
Poutre Horizontale 1F1
4
Poutre Horizontale 2
F2
PIÈCE
2
DESCRIPTION
F3
Panneau de Toiture Court (3) 2I3
J
R1
1Cuirasse
Poteau（1）2
M2
R2
L
Poteau（2）
M1
2
2
14
4
Comptoir
Support de l’Angle
QTÉ QTÉ
G
H1
H2
H3
I1
I2
2
2
2
2
Crochet du Toit
Panneau de Toiture Long (1)
Panneau de Toiture Long (2)
Panneau de Toiture Long (3)
Panneau de Toiture Court (1)
2
8M4
Façade 2
N
P
O
4
Lampe LED
Barre de Support de la toiture 6
Poutre Horizontale 3 4Rondelle Carrée 1 M3 24
R2
M3
M4
M2
M1
Façade du Petit Toit
DESCRIPTION
Panneau de Toiture Court (2)
Carreau (pré-assemblé)
Rondelle Carrée 2

19
QUINCAILLERIE INCLUSE
AA BB
Boulon M6 x 20 mm
Qté. 84 + 5 de rechange
Rondelle plate M6
Qté. 134 + 7 de rechange
Rondelle à ressort M6
Qté. 20 + 1 de rechange
Clé M6
Qté. 2
Piquet Φ 8 x 180 mm
Qté. 8
CC EE
FF II Z
Vis centrale M4 x 10 mm
Qté. 32 + 2 de rechange
JJ
Boulon M6 x 15 mm
Qté. 48+ 3 de rechange
Boulon M6 x 40 mm
Qté. 2 + 1 de rechange

AVERTISSEMENTS
•
•Assurez-vous de laisser assez d’espace de dégagement autour de cet article.
•Avant d’assembler le produit, cherchez une surface à niveau a une distance de
pas moins de 6 pieds de n’importe quelle structure ou obstructions, comme
barrières, garages, maisons, branches pendantes, fils à tendre ou câbles
électriques.
•Le gazebo doit être ancré à la terre avec les piquets pour plus de sécurité.
•Il ne doit pas s’installer de façon permanente a une surface en ciment ou une
plateforme.
•N’assemblez pas le gazebo sur de la terre sable, boueuse ou de gravier, car
les piquets n’auront pas assez d’ancrage dans ces sortes de terres.
•Ce produit n’est que pour emploi extérieur uniquement! Ne montez jamais
sur le gazebo! N’utilisez pas cette unité pendant un orage (électrique)!
PRÉCAUTIONS
•Tout montage ou entretien du produit doit être effectué par les personnes
adultes uniquement.
•Organisez une équipe d’au moins 6 personnes pour le montage ou le
déménagement du produit.
•Certaines pièces peuvent avoir des bords tranchants. Portez des gants de
protection s’il est nécessaire.
•Vérifiez tous les écrous et boulons de temps en temps pour vous assurer
qu’ils sont serrés. Serrez-les encore quand vous le croyez nécessaire.
•N’accrochez pas de poids sur la structure du toit.
•Les enfants doivent être toujours bien surveillés quand ils sont aux alentours
de ce produit. Ne laissez jamais les enfants sans surveillance.
Hook maximum weight: 26 lbs
PREPARATION
PRÉPARATION
•Limite de poids du crochet: 26 lbs
Avant de commencer l’assemblage du produit, assurez-vous d’avoir toutes les
pièces. Comparez le conten de l'emballage avec la liste des pièces et celle de
la quincaillerie incluse. S'il y a des pièces manquantes ou endommagées, ne
tentez pas d’assembler le produit.
Temps de Montage Prévu: 90 minutes
Ou tils nécessaires pou r le montage: Clé (comprise) et Tournevis cruciforme
(n’est pas compris).
20
Ce produit est conçu pour emploi extérieur uniquement et doit être installé sur
une surface plate et horizontale.