Sunjoy Thrshd Madaga Gazebo 10x10 User manual

>> assembly instructions
Thrshd Madaga Gazebo 10'x10'
style # GZ136PST7A
dpci# 009050317
Production Number: XXXXXXXX

Congratulations on your latest Target purchase
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way transforming your space in no time.
Good luck-though we’re confident you won’t need it.
Before you begin
1. Questions? Please call 1855-MYTGTHOME (1855-698-4846) for parts and service. For faster service, have the style number
and DPCI number ready when calling.
2. Use the carton as a working surface to prevent product damage during assembly
3. Gather all tools prior to assembly.
Warning:
1. This unit is heavy. Do not assemble this item alone.
2. Read and follow all Warnings & Assembly Instructions before attempting to assemble.
3. KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
4. This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source.
The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.
5. For safety reasons, please keep kids and pets away from the construction area of the gazebo. Children and pets should be supervised
when they are in the area of the gazebo construction.
6. Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line,
or electrical wires.
7. Some parts may have sharp edges. When assembling and using this product, basic safety precautions should always be foll owed
to reduce the risk of personal injury and damage to the product.
8. Assemble on level ground.
9. Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
2

3
Tools needed

4
Table of contents
Introduction
Hardware
Parts list
Assembly
2-3
5
6
7-10
Questions?Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

5
Hardware Pack
(H1) x 28
M6 x 20 screw
(H6) x 12
P12401A01001
(H2) x 52
M6 flat washer
(H3) x 12
M6 x 40 screw
(H4) x 12
M6 nut
(H5) x 1
M6 wrench
H02020C11 H19001C11 H09040C11 H14001C11 H00001C11

6
A
B
C
D
E
F
G
H
I
J
K
L
4
4
4
1
1
4
4
4
1
1
4
1
P11037C01107
P11038C01107
P11139B01107
P10103B01107
P12601C01107
P10302B01168
P10471A01107
P10303B01168
P00124A07007
P10102B01107
P10247A01107
P00117A07007
left frame
right frame
column
center fitting for the second roof
hook
short bar for the second roof
long bar for the second roof
medium bar for the second roof
large canopy
top center fitting
top roof connector
small canopy
ITEM DESCRIPTION QUANTITY

7
Step1:
(H1) x 28
M6 x 20 screw
(H2) x 28
M6 flat washer
washers (H2).
Fig.1
Fig.2 Fig.3
H1
H2
H1
H2
H2 H1
H2 H1
H1 H2
H1 H2

8
Step2:
(H2) x 16
M6 flat washer
(H3) x 8
M6 x 40 screw
(H4) x 8 M6 nut (H5) x 1 M6 wrench
(H6) x 12
peg
washers washers
H3 H2 H4
H3 H2 H4

9
Step3:
Put (I) on the second roof but do not expand it. Insert (K) into (J),
and then use screws (H3), washers (H2) and nut (H4) to secure
(K) and the bars on the second roof.
(H2) x 8
M6 flat washer
(H3) x 4
M6 x 40 screw
(H4) x 4
M6 nut
K
JK
H2
H3 H4 K
J
Fig 8.2
Fig 8.1

10
Step4:
Attach small canopy (L) first and spread it over.
Then spread large canopy (I) out. Connect cuffs
to roof support bars.
L
I