Sunjoy BALI 147079 User manual

www.sunjoydirect.com
1-866-578-6569
MONDAY-FRIDAY 11:30 AM TO 8:30 PM PACIFIC STANDARD TIME
MONDAY-FRIDAY 8:30 AM TO 4:30 PM EASTERN STANDARD TIME
SUNJOY INDUSTRIES GROUP LIMITED
619 Slack Street
Steubenville, Ohio 43952 USA
DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
OR TOLL FREE AT:












WARNING:
1. Assembly Instructions must be followed.
2. Gazebo must be secured / anchored when fully assembled.
SAFETY INFORMATION:
Please read and understand this entire manual before attempting to assemble or install the product.
When installing and assembling the item, it is recommended two or more adults are involved.
This product is intended for outdoor use only and should be placed on flat, horizontal ground.
Ensure enough clearance around the product.
Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightning.
Do not climb on top of the item. Falling off it can result in serious injury, possibly even death.
This package contains small items and plastic bags that should be kept away from children.
Ensure all connectors and poles are firmly secured in position. It is important to do so before use to avoid
collapsing or damage to the item, which could also result in injury.
Never barbecue under this item or use lanterns that contain open flames.
Center hook’s maximum weight capacity is 26 lbs.
WARNING:
Keep all flame and heat sources away from the tent fabric. This tent is made with fabric that meets CPAI-84
specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any
flame source. The application of any foreign substance to the tent fabric may render the flame-resistant
properties ineffective. Remove the roof during severe weather conditions such as sustained strong winds,
hurricanes, tropical downpours and snow. The manufacturer or retailer is not liable for any loss of the product
or other items due to the failure to take down the item during any inclement weather.
ASSEMBLY INSTRUCTIONS
ITEM# L-GZ806PAL-A
SKU# 147079
10’ X 12’ BALI WICKER GAZEBO

CARE AND MAINTENANCE:
1. This item is intended for decorative and sunshade purposes only, and is not designed to withstand severe
weather, including high winds, sustained tropical downpours, and snow. In order to avoid damage in such
instances, remove any accumulated water and the roof immediately. Disassemble the item in the reverse
order of the assembly steps if necessary prior to a severe storm.
2. A partially disassembled item is likely not stable enough to resist high winds and other severe weather, and
therefore can be damaged and/or cause damage. Since assembly time is only approximately 30 minutes,
complete disassembly is recommended prior to any major storm.
3. Do not use bleach, acid, or other abrasive cleaners on the roof or frame parts.
4. Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to
the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched. This is a natural
process. To minimize this condition, it is recommended that care be taken when assembling and handling the
product, in order to prevent the paint from being scratched.
5. Surface rust can be removed easily using a very light application of common cooking oil. If surface
oxidation (rusting) occurs and no measures are taken to correct it, the oxidation may start dripping onto the
assembly surface, which may cause damaging stains that may be difficult to remove.
6. If the product will not be used for a long period (e.g. winter time), it should be stored in a clean, dry
environment.
7. Keep the original packaging to store the item.
PREPARATION:
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
All you will need is a step ladder (not included). No Tools Required for Assembly.
































Post A 4
Long Cross beam B 2
Short Cross beam C 2
Slanting bar D 4
Middle beam E 4
Knob F 36
Corner connector
(big top frame) G 4
Big top frame bar
(long side) H 2
Big top frame bar
(short side) I 2
Small top beam J 1
Small top slanting bar K 4
Center hook L 1
Crossbeam centerpiece M 4
Mosquito netting bar
(long side) N 4
Mosquito netting bar
(short side) O 4
Small canopy P 1
Large canopy Q 1
Mosquito netting R 1
Walls S 1

Parts List


























Fig.1: Spread the crossbeam (B & C) to straight till fix by the elastic
buckling.
Fig.2: Insert the crossbeam (B & C) into card slot of the post (A), fix them by
knob (F).
Fig.3: Connect the mosquito netting bar N (O) to the post (A) and the
crossbeam B (C) by knob (F).
Fig.4: Connect the crossbeam centerpiece (M) to the middle of the
crossbeam (B & C) by knob (F).

























Fig.5: Insert the big top frame bar (H & I) to the big top corner connector (G).
Fig.6: Insert the slanting bar (D) to the big top corner connector (G).
Fig.7: Insert another end of slanting bar (D) to the post (A).
Fig.8: Insert the middle beam (E) to the big top frame bar (H or I).
Fig.9: Insert another end of middle beam (E) to the middle of crossbeam (B or C).
Fig.10: Insert the small top slanting bar (K) to the small top beam (J).


























Hardware Pack 3
GG Plastic ring 104 PCS
FF ￠6*180 stake 16 PCS
Fig.11: Screw the center hook (L) to the middle of the small top beam (J).
Fig.12: Attach the small canopy (P) to the small top along the small top slanting bar (K), aligning the corners
and stretching it to fit.
Fig.13: Place the large canopy (Q) to big top, do not spread here. Insert the small top slanting bar (K) to the
big top corner connector (G).











Made in China
Fig.14: Spread the large canopy (Q) along the slanting bar (D), aligning the corners and stretching it to fit,
then stick inner valance together.
Fig.15: Hang the wall (S) on the outside of mosquito netting bar (N & O) by plastic ring (GG), and hang the
mosquito netting (R) on the inside of mosquito netting bar (N & O).
Fig.16: Fix assembled gazebo to lawn with stake (FF).
Now, your Gazebo is ready for use.