Sunnydaze Decor DTA-287 User manual

DM-222-IC
ENTRYWAY TABLE WITH DRAWERS
DTA-287
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2022
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

Page 1 / 8

INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
    
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture;
only use a slightly moistened cloth.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.

dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
DM-222-IC 08/2022 Page 2 / 8
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or
strip the screw hole, causing a weak connection and reduced stability.

  
AWood Dowel 22
AZ Hex Key 1
BCam Screw 20
BX M3x12mm Flat Screw 4
CCam Lock 20
CZ M4x25mm Wood Screw 2
DM3.5x14mm Flat Screw 20
DE M5x50mm Screw 1
DF M4x25mm Bolt 3
DZ  18
FM Screw Cap 18
HE Angle Bracket 1
LWall Anchor 1
L1 Left Drawer Slide Track 3
L2 Left Drawer Slide 3
PM6x8mm Set Screw 12
PX Knob 3
R1 Right Drawer Slide Track 3
R2 Right Drawer Slide 3
XPlastic Foot 4
YSticker 12
COMPONENTS
DM-222-IC 08/2022
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small parts that can be
swallowed. Keep children and pets away during assembly.
WARNING
Page 3 / 8
 (not included)
Phillips Screwdriver Rubber Mallet Power Drill
with 6mm Bit
  
1Right Side Panel 1
2Left Side Panel 1
3Tabletop 1
4Top Back Panel 1
5Drawer Front 3
6Drawer Side Panel (L/R) 6
7Drawer Back 3
8Drawer Bottom 3
9Left Back Leg 1
10 Right Back Leg 1
11 Front Leg 2
12 Shelf 1
13 Divider 2
14 Traverse 1
15 Bottom Back Panel 1

Install wood dowels by gently tapping
them into the designated hole using a
rubber mallet.
Use a screwdriver to tighten the cam

the panel. Do not over-tighten or
under-tighten.
Align the cam lock opening (arrow)
with the pre-drilled hole on the side
of the panel. Use a screwdriver to
adjust alignment as needed.
DM-222-IC 08/2022 Page 4 / 8
ASSEMBLY
Wood Dowel Cam Screw Cam Lock
IMPORTANT INSTALLATION INFORMATION
For the stability of the unit, it is important that furniture connectors are installed correctly.
See drawings and tips below for proper installation.
STEP 1
01: 1
02: 1
D: 2
P: 4
L1: 1
R1: 1
STEP 2
13: 2
A: 4
D: 4
P: 8
L1: 2
R1: 2
STEP 3
04: 1
14: 1
A: 6
STEP 4
03: 1
B: 8
D: 2
HE: 1

TIP: Install wood dowels by gently
tapping them into the designated
hole using a rubber mallet.

TIP: Install wood dowels by gently
tapping them into the designated
hole using a rubber mallet.
IMPORTANT:
Install Flat Screw (D) after Set Screws (P).
IMPORTANT:
Ensure the slide tracks
are installed correctly, as
indicated in the drawing.
IMPORTANT:
Ensure the slide tracks
are installed correctly, as
indicated in the drawing.

DM-222-IC 08/2022 Page 5 / 8
STEP 5
DZ: 4
STEP 6
09: 1
11: 1
DZ: 3
STEP 7
10: 1
11: 1
DZ: 3
STEP 8
12: 1
15: 1
DZ: 8
 
 

DM-222-IC 08/2022 Page 6 / 8
STEP 9
BX: 4
X: 4
STEP 10
CZ: 2
STEP 11
C: 8
STEP 12
05: 3
06: 6
07: 3
A: 12
B: 12
 
 

STEP 13
08: 3
C: 12
STEP 14
DF: 3
PX: 3
Y: 12
D: 12
L2: 3
R2: 3
STEP 15
DE: 1
L: 1
DM-222-IC 08/2022 Page 7 / 8
 

IMPORTANT: The included wall anchor is suitable for drywall and
masonry walls. Select a drill bit that is suited for your wall material
and is smaller than the wall anchor; if the drill bit is too large, the
tipover restraint system will be faulty. If in doubt about installing the

Carefully measure and mark the location of pilot hole before drilling.
WARNING: Check for pipes and electrical wiring before drilling.
• Place the unit against the wall and mark the position for drilling the
pilot hole.
• Move the unit away from the wall.
• Drill a pilot hole to the depth of the wall anchor.
• Insert the wall anchor, ensuring the opening is flush with the wall.
• Align the unit with the wall anchor and secure the unit to the wall
using the included 50mm Screw.
Assistance is
recommended for
moving furniture.

DM-222-IC 08/2022 Page 8 / 8
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


SAFETY STATEMENTS & WARNINGS
• For residential use only. Not for commercial or industrial use.
• For indoor use only.
• Ensure all fittings are tight before use. Periodically check fittings to ensure they are tight.
• Only use this unit on a flat, level surface.
• Do not sit, stand or climb on the unit.
• Supervise children; never allow children to climb or sit on this unit as it may tip over and cause serious injury.
• Do not place liquids or hot items directly on the furniture.
• Never put a television on this product.
• Never use chemical cleaning products or polishes as doing so may damage the finish.
• Do not exceed the weight capacity of the furniture.
• Do not overload the shelf as doing so may cause it to sag.
• Do not overload the drawers as doing so may cause permanent damage.
• Do not place the unit in direct sunlight.
• Avoid placing the unit near heating or cooling vents as forced air is very drying and can damage the unit.
• Do not write on furniture without a padded barrier to protect the surface.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
STEP 16
FM: 18
Also apply screw caps
to the opposite side of
the table.
Note, this unit may include extra screw
caps; save any extra caps in the event
one falls o and becomes lost.