Sunnydaze Decor MID-CENTURY MODERN TV STAND User manual

8000200002
MID-CENTURY MODERN
TV STAND
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
07/2022
HELPFUL HINTS
Sunnydaze Decor advises reading this manual fully, and assembling the item soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

Page 1 / 10
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small parts that can be swallowed. Keep children and pets away during assembly.
WARNING

07/20228000200002
INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
    
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.

dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
WEIGHT CAPACITY
Page 2 / 10

07/20228000200002
   
01 6000200264 Top 1
02 6000500537 Left Panel 1
03 6000600103 Front Apron 1
04 6000400293 Upper Division Panel 1
05 6000800211 Shelf 1
06 6000500536 Right Panel 1
07 6000400294 Lower Division Panel 1
08 6001000331 Top Backing Board 1
09 6001000332 Bottom Backing Board 1
10 6000300245 Bottom 1
11 6000700080 Door 1
  
AWood Dowel 20
BM3.5x12mm Flat Screw 20
CM3.5x16mm Round Screw 32
DM4x50mm Flat Screw 4
ECam Screw 6
FCam Lock 6
GMetal Bracket 2
HAngled Support 6
IPlastic Wedge 16
JNail 6
KBack Panel Bracket 6
LSticker 1
MRail 2
NLeg 5
O1 Upper Door Slider 2
O2 Lower Door Slider 2
O3 Sliding Door Kit Screw 8
COMPONENTS
0
0
-
000
000
000
0
00 - 000
0
0
0
000
0
Sequence Part Code
BEFORE BEGINNING ASSEMBLY:
PCheck all components match the parts list; the parts come with
the code stamped on, as shown in the drawing to the left
PSeparate hardware by type
(not included)
Phillips Screwdriver
Rubber Mallet
Hammer
Page 3 / 10

Install wood dowels by gently
tapping them into the designated
hole using a rubber mallet.
Use a screwdriver to secure the
threaded end of the cam screw into
the designated hole, as shown.
Align the cam lock opening (arrow)
with the pre-drilled hole. Use a
screwdriver to adjust alignment.
E
A
A
A
A
M
07/20228000200002
STEP 1
ASSEMBLY
IMPORTANT INSTALLATION INFORMATION
Wood Dowel Cam Screw Cam Lock
For the stability of the unit, it is important that furniture connectors are installed correctly.
See drawings and tips below for proper installation.



03 x1
x2
B
x6
C
x2
G
x6
H



05 x1
x2
M
10 x1
STEP 2
x4
A
x1
E
M3.5x12mm
M3.5x16mm
IMPORTANT:

Ensure Angled Support (H) is installed exactly as shown.
Page 4 / 10
IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability.

A
A
A
A
A
A
07/20228000200002






02 x1
x4
A
x4
E
06 x1
STEP 4
STEP 3


11 x1
x2
O1
x2
O2
STEP 5
01 x1 04 x1 07 x1
x12
A
x1
E
x8
O3

Page 5 / 10

07/20228000200002



STEP 7
STEP 6

STEP 8
x1
F
x1
B
x6
C
M3.5x12mm
M3.5x16mm
x1
F


Page 6 / 10

07/20228000200002




STEP 10
STEP 9

STEP 11
x1
F
x1
BM3.5x12mm
x1
F

x1
DM4x50mm
x2
F
x1
L
IMPORTANT:
Part 5 - ensure the groove for
the door slides is installed on
the front of the unit.
Page 7 / 10

07/20228000200002



STEP 13
STEP 12
08 x1 09 x1
x3
DM4x50mm
Page 8 / 10

07/20228000200002


STEP 15
STEP 14
x16
B
x20
C
M3.5x12mm
M3.5x16mm
x16
I
x6
J
x6
K
x5
N
TIP: Keeping your hands on the short sides of Part 11, push down on the inside
mechanism on Upper Door Slides (O1).
Place Lower Door Slides (O2) into the groove on the bottom of the stand.
Align the upper door slides with the shelf and release the upper slide mechanisms.
Page 9 / 10

Page 10 / 1007/20228000200002
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


SAFETY STATEMENTS & WARNINGS
• Residential use only. Not for commercial or industrial use.
• For indoor use only.
• Ensure fittings are tight before use. Periodically check fitting to ensure they are tight.
• Only use this unit on a flat, level surface.
• Do not sit, stand or climb on the unit.
• Supervise children; never allow children to climb or sit on this unit as it may tip over and cause serious injury.
• Do not place liquids or hot items on the furniture.
• Never use chemical cleaning products or polishes as they may damage the finish.
• Do not overload the shelves as doing so may cause the shelves to sag.
• Do not place the unit in direct sunlight.
• Avoid placing unit near heating or cooling vents as forced air is very drying and can damage the unit.
• Do not write on furniture without a padded barrier to protect the surface.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.