Sunnydaze Decor Floating Chaise User manual

02/2020PH004-3
CAUTION
This chair is not designed foruseasaswing. Bouncing,
swinging, or any other signicant movements while
in the chair may cause serious injury.
This stand must be on a level, stable surface. Make
sure the safety strap is attached correctly, and all
hardware is securely tightened before each use.
Weight Limit: 260 lbs.Weight Limit: 260 lbs.
FLOATING CHAISE
LOUNGE CHAIR
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
HELPFUL HINT
Sunnydaze advises reading this manual fully, and assembling the item soon after purchase. Check that all
parts are accounted for and familiarize yourself with the assembly before beginning.
Assemble components on a soft, clean surface to avoid scratching/damaging the nish.
Save this manual for future reference.
WARNING!
CHOKING HAZARD — This item contains small parts that can be swallowed. Keep children away during assembly.
2-PERSON
ASSEMBLY
RECOMMENDED
Page 1 / 6

02/2020PH004-3
Lower Support Pole
Qty. 1
Upper Support Pole
Qty. 1
Front Base
Qty. 1
Back Base
Qty. 1
Left Seat Back Pole
Qty. 1
Right Seat Back Pole
Qty. 1
Right Seat Pole
Qty. 1
Left Seat Pole
Qty. 1
Front Seat Frame
Qty. 1
Seat Frame Brace
Qty. 1
Umbrella Frame
Qty. 1
Armrest
Qty. 2
Closed S-Hook
Qty. 1
Quick Link
Qty. 1
Seat Web
Qty. 1
Rope
Qty. 1
Chair Cushion
Qty. 1
Umbrella Canopy
Qty. 1
M8x95 Bolt Set
Qty. 1
M8x80 Bolt Set
Qty. 1
M8x72 Bolt Set
Qty. 1
M8x15 Bolt
Qty. 2
M8x30 Bolt
Qty. 4
M6x15 Bolt
Qty. 2
Safety Strap
Qty. 1
Eye Bolt
Qty. 1
Nut Set
Qty. 1
Hex Key
Qty. 2
Spanner
Qty. 1
COMPONENTS
Inspect packaging to ensure all parts are accounted for before disposing of packing materials.
A B C D E
F G H I J
L M N O P
Q R S T U
VWX Y Z
AA AB AC AD
Page 2 / 6

02/2020PH004-3
ASSEMBLY
STEP 1
• Connect Lower Support Pole (A) to Back
Base (D) using M8x80 Bolt Set (U).
• Slide Front Base (C) through the loop on
Safety strap (Z), then into the lower support
pole, as shown.
• Align the holes of the front base and lower
support pole and secure with 2x M6x15
Bolt (Y), as shown.
STEP 2
• Place Upper Support Pole (B) onto the
lower support pole. Align the holes and
secure with M8x72 Bolt Set (V).
• Slide Umbrella Frame (L) onto the upper
support pole. Ensure the umbrella frame
is beyond the hole at the end of the upper
support pole and secure to the pole.
NOTE: Avoid over-tightening the threaded knob
on the umbrella frame as it may damage the nish
of the stand.
STEP 3
• Insert Eye Bolt (AA) through the underside
of the hole on the uppers support pole.
• Secure the eye bolt using Nut Set (AB).
Page 3 / 6

02/2020PH004-3
STEP 4
• Place Umbrella Canopy (S) onto Umbrella
Frame (L).
• Slide the ribs into the plastic caps that are
sewn into the ends of the umbrella canopy.
NOTE: The canopy is intended to t tightly. Some
force may be required but take care not to bend
the ribs of the umbrella frame.
STEP 5
• Identify the tops of Seat Back Poles (E &
F); the top will have a plug in the end.
• Ensuring the holes to secure the arms are
on the outsides of the poles.
• With Closed S-Hook (N) in between Left
Seat Back Pole (E) and Right Seat Back
Pole (F), secure components with M8x95
Bolt Set (T), as shown.
STEP 6
• Press the button spring clip on Right Seat
Pole (G) and slide it into Front Seat Frame
(I), the button will snap into place.
• Press the button spring clip on Left Seat
Pole (H) and slide it into Front Seat Frame
(I), the button will snap into place.
• Connect the assembled seat to the seat
back poles, as shown.
• Attach Seat Frame Brace (J) to the
backside of the seat poles using 2x M8x15
Bolt (W).
Page 4 / 6

02/2020PH004-3
STEP 7
• Unscrew the nut on Quick Link (O) and
hang the link on Eye Bolt (AA).
• Hang the assembled chair by placing
Closed S-Hook (N) in Quick Link (O).
• Screw the nut on the quick link closed,
ensuring it is tightly fastened.
STEP 8
• Align Armrest (M) with the holes on the
side of chair.
• Loosely connect the top of Armrest (M) to
the floating chair using 1x M8x30 Bolt (X),
as shown.
• Run 1x M8x30 Bolt (X) through the bottom
of Armrest (M), then through Safety Strap
(Z), and into the side of the floating chair,
as shown.
• Tighten armrest hardware and repeat this
step to attach the second armrest.
STEP 9
• Unravel Rope (Q) and fold in half to find the
center-most point of the rope.
• Beginning at the footrest, attach Seat Web
(P) to the floating chair by running Rope
(Q) through the eyelets of the seat web and
around the chair frame.
Tips: To help keep the rope length even on both
sides, switch between the left and right side every
few eyelets.
After initial installation of the seat webbing, start
back at the footrest and pull the rope every few
eyelets to ensure the seat webbing remains taut.
• Once seat web is taut, wrap excess rope
to the chair frame, above the frame brace,
leaving enough rope to tie/knot the ends.
Page 5 / 6

Page 6 / 602/2020PH004-3
STEP 10
• Tie Chair Cushion (R) onto the chair.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
Any modication or failure to follow the recommended care will void the product warranty.
SAFETY STATEMENTS & WARNINGS
USE & CARE
Under normal use, Sunnydaze outdoor furniture will last for years.
It is important to follow basic use & care tips to prolong the life of your oating lounger.
• SAFE USE: Do not use this floating lounge chair for swinging, bouncing, jumping, or any other excessive
movements; doing so may cause serious injury, including, but not limited to, the stand tipping over.
• SUN EXPOSURE: All fabrics will eventually fade from sun exposure. Maintain fabric color and integrity by
storing the cushion and umbrella canopy indoors when not in use.
• CHILDREN: Supervise children at all times. Do not allow children to play on or sleep in the lounge chair.
• INSPECTION: Ensure the unit is assembled correctly and all hardware is securely tightened before every use.
• CLEANING: Use a soft cloth, warm water and mild detergent to wipe down the unit. Dry the stand after
cleaning to prevent rust. Do not use chemicals or abrasive materials to clean any part of the unit.
• STORAGE: Store the cushion and umbrella indoors when not in use. Store the stand and chair in a cool,
dry location to prevent damage and rust that may result from exposure to moisture and weather elements.
• SCRATCHES: The powder coating on the stand and frame is tough and durable but, even under normal
use, some scratching is inevitable. To avoid excessive rust, wipe off moisture as necessary.
• Do not exceed the weight limit: 260 pounds
• This product is intended to be used by one person at a time.
• Use caution when sitting in the chair. Enter and exit the chair near the armrest only, with your feet firmly on the ground.
• Do not swing, bounce, jump, twist, or spin in the chair.
• The chair must be used with the provided safety strap attached to the stand and chair as shown in the assembly.
• Install all parts in accordance with the assembly instructions and inspect the stand before use.
• Ensure all hardware is securely installed and tightened before each use.
• Always inspect the chair, stand and hardware for damage before each use.
• Do not allow children to use this product without adult supervision. This floating lounger is NOT a TOY.