Sunnydaze Decor LAM-585 User manual

LY111 06/2023 Page 1 / 3
OUTDOOR COFFEE TABLE
LAM-585
Review all assembly and care instructions carefully before using this product. Save this manual for future reference.

  
ATable Top 1
BEnd panel 2
CSupport Beam 1
DJCBC 60mm Bolt 6
EBarrel Nut 6
FHex Key 1
GBarrel Nut Driver 1
HELPFUL HINT
This item was treated with teak oil at the factory. Apply a suitable wood oil at least once a year, or
when the wood looks particularly dry. Left untreated, the wood will weather to a silvery gray color.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
CHOKING HAZARD — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING
NOTE: Over time and with use,
the bolts may become loose.
Save the included tools for
tightening loosened hardware.
65
pounds
29 kg
Weight Capacity

LY111 06/2023
A
C
E
D
B
F
G
D
Page 2 / 3
1. Lay Table Top (A) face-down on a soft, clean surface.
2. With the slotted ends of the barrel nut facing upwards, place four Barrel Nuts (E) into the underside of the
table top. Use Barrel Nut Driver (G) to turn the barrel nut so the threaded hole aligns with the pre-drilled
mounting hole.
3. Align one Leg Panel (B) with the table top and loosely secure by hand-tightening two JCBC 60mm Bolts (D).
Repeat this step on the opposite side of the table.
4. Align Support Beam (C) with the bottoms of the leg panels, as shown.
5. Insert two Barrel Nuts (E) into Support Beam (C) and secure using two JCBC 60mm Bolts (D).
6. Gently tighten all bolts using Hex Key (F).
ASSEMBLY
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.

Tip: Always fully insert the hex key inside the designated
notch of the bolt.
If the hex key is not fully inside the notch, the hex key could
slip out, causing damage to the bolt head. Repeated hex key
slipping will cause the notch to become rounded, making it
di󰀩cult or impossible to tighten the bolt with the hex key.

LY111 06/2023 Page 3 / 3
General Use & Care
SAFE USE: For residential use only. Only use on a at, level surface. Never sit or stand on any part of this unit.
INSPECT: Periodically check hardware and tighten as necessary.
EXPOSURE: Over time, sunlight and weather elements may change the color of natural wood. Avoid leaving
wooden furniture in the rain or high-humidity climates as wood can expand and contract with humidity changes;
you may need to tighten ttings periodically. If this item is not used for extended periods, we recommend
covering or storing it indoors.
MAINTENANCE:This item was treated with teak oil at the factory. To maintain the appearance, apply a
suitable penetrating Wood, Teak or Linseed Oil (not included) yearly, or when the wood looks particularly dry.
Clean the unit and bring it into a warm, indoor location. Allow the unit to thoroughly dry before applying oil;
drying may take several days. Only apply oil to wooden surfaces. Use a soft cloth or soft brush and carefully
apply oil as directed by the wood oil manufacturer.
WINTER CARE & STORAGE: Cover and store furniture indoors during the winter to protect it from ice and
snow. Doing so will preserve the appearance and integrity of the unit.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS CAUSED BY THE APPLICATION OF
CHEMICAL TREATMENTS, PROTECTIVE COATINGS, TOUCH-UP PAINT, OR CLEANING PRODUCTS.
Cleaning
Do not use harsh chemicals or abrasive materials to clean the furniture.
DO NOT USE BLEACH DO NOT USE A PRESSURE WASHERHAND-WASH ONLY
Identify the direction of the woodgrain. Following the direction of the woodgrain, u se a soft cloth or a soft-bristled
brush, like a paintbrush, to remove loose dust, dirt and debris.
SAFETY STATEMENTS & WARNINGS

• Do not sit or stand on any part of this unit.
• Do not exceed the weight capacity of the unit.
• Do not put hot items on or near furniture.
• Keep furniture a safe distance from heat sources such as fire pits, patio heaters, and grills.
• Do not use harsh chemicals or abrasive materials to clean this unit.
• This product is for residential use only; institutional or commercial use will automatically void the product warranty.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
WARNING:
             

