Sunnydaze Decor MERANTI FRN-287 User manual

Page 1 / 3
MERANTI WOOD ROCKING CHAIR
FRN-287
Read this manual carefully before using this product. Save this manual for future reference.

CHOKING HAZARD — This item contains small parts that can be swallowed. Keep children away during assembly.
WARNING
  
ARight Arm 1
BLeft Arm 1
CBackrest 1
DSeat 1
ESupport Bar 1
FFootrest 1
Ensure all parts are
accounted for before
disposing of packaging.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
89561 12/2020
  
1JCBC M6x40 Bolt 4
2JCBC M6x60 Bolt 6
3JCBC M6x80 Bolt 2
4Barrel Nut 8
5Hex Key 1
6Barrel Nut Driver 1

ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.
Page 2 / 3
STEP 1
A: 1
B: 1
E: 1
F: 1
2: 2
3: 2
4: 4
STEP 2
D: 1
2: 4
4: 4
STEP 3
C: 1
1: 4
89561 12/2020
• Insert two Barrel Nuts (4) into Support Bar (E).
Use the Barrel Nut Driver to align the barrel nut
with the holes on the outside of the support bar.
• Insert two Barrel Nuts (4) into Footrest (F). Use
the Barrel Nut Driver to align the barrel nut with
the holes on the outside of the footrest.
• Loosely secure Support Bar (E) to Right Arm (A)
by hand-tightening one JCBC M6x60 Bolt (2),
ensuring the bolt threads into the barrel nut.
• Ensuring the rounded edge faces forward,
secure Footrest (F) to Right Arm Panel (A) by
hand-tightening one JCBC M6x80 Bolt (3),
ensuring the bolt threads into the barrel nut.
• Repeat the previous two steps to loosely attach
Left Arm (B).
• Insert four Barrel Nuts (4) into Seat (D), as
shown. Use the Barrel Nut Driver to align the
barrel nut with the holes on the outsides of the
seat.
• Loosely secure Seat (D) to the arm panels by
hand-tightening four JCBC M6x60 Bolts (2),
ensuring the bolts thread into the barrel nuts.
Do not fully tighten bolts until after Step 3 is complete.
Do not fully tighten bolts until after Step 3 is complete.
• Align Backrest (C) between the arm panels, as
shown.
• Loosely secure Backrest (C) to the arm panels
by hand-tightening four JCBC M6x40 Bolts (1).
• Tighten all bolts from all steps using Hex Key
(5).

Page 3 / 389561
Care & Maintenance
SAFE USE: For residential use only. Only use on a at, level surface. Do not stand on the chair.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.
COVER: When not in use, cover furniture with a breathable cover to help protect it from the e󰀨ects of
sunlight, inclement weather, dust build-up, and collecting debris.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move to
a cool, dry indoor location. Covering while in storage is recommended to help prevent dust build-up.
MAINTENANCE:If left untreated, the wood may weather. A suitable wood stain or oil may need to be
applied yearly.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

• Do not exceed the weight capacity of the furniture.
• Do not stand on the chair.
• Inspect hardware often and tighten loose hardware before use.
• Do not put hot items on or near furniture.
• Do not allow children to use this product without adult supervision.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
• Do not use a pressure washer to clean the furniture.
SAFETY STATEMENTS & WARNINGS

12/2020